Browse "ME-Theses_Ph.D.(박사논문) " by Type Thesis(Ph.D)

Showing results 1821 to 1840 of 1884

1821
평면벽 근방의 평판에 작용하는 유체역학적 힘 : MEMS의 해석 및 응용 = Hydrodynamic force on a plate near the plane wall : analysis of MEMS and its applicationslink

김기운; Kim, Ki-Woon; et al, 한국과학기술원, 2003

1822
평면변형률 상태 하에서 유한요소법을 이용한 균열닫힘거동 예측에 관한 연구 = Finite element analysis of fatigue crack closure under plane strain statelink

이학주; Lee, Hak-Joo; et al, 한국과학기술원, 2003

1823
평판 디스플레이용 복합재료 로봇구조의 설계 및 제조에 관한 연구 = Design and manufacture of the composite robot structure for manipulating large glass panels for flat panel displaylink

오제훈; Oh, Je-Hoon; et al, 한국과학기술원, 2001

1824
평판에 횡방향으로 놓인 사각형 그루브를 갖는 물체의 강제대류에 관한 실험 및 수치적 연구 = Experimental and numerical study on forced convection from plates with transverse rectangular grooveslink

이상종; Lee, Sang-Jong; et al, 한국과학기술원, 2000

1825
평판형 광파 회로 기반 저잡음, 고안정도 펨토초 레이저 = Robust and low-noise femtosecond lasers based on planar lightwave circuit deviceslink

김철; Kim, Chur; et al, 한국과학기술원, 2017

1826
평행광 엑스선 토모그라피의 설계와 오차분석에 관한 연구 = Design and Error Analysis of Parallel-Beam X-ray Tomographylink

강성훈; Kang, Sung-Hoon; et al, 한국과학기술원, 2011

1827
평활화 유한 요소법을 이용한 미분장 근사와 요소 개발에의 응용 = Differential field approximation using the smoothed finite element method and its application to development of finite elementslink

최재훈; 이병채; et al, 한국과학기술원, 2019

1828
폐플라스틱 선별 로봇의 흡착 위치 선정과 고속이송궤적 생성 알고리즘 연구 = Study of suction location decision and rapid manipulation trajectory generation algorithm for plastic waste sorting robotlink

엄상우; 김경수; Kim, Kyung-soo; 김수현; et al, 한국과학기술원, 2022

1829
포화 구동기를 갖는 해상 크레인의 위치 제어 전략 = Position control strategy for an offshore crane with actuator saturationlink

김동호; Kim, Dongho; et al, 한국과학기술원, 2016

1830
폴리머 기판에 전사된 다층 그래핀의 전기-기계적 거동 = Electromechanical behavior of multilayer graphene on polymer substratelink

원세정; Won, Sejeong; et al, 한국과학기술원, 2015

1831
폴리머 초소형 노즐 어레이를 이용한 물 정전분무 그리고 응용 = Electrospray of water with polymer micro nozzle arrays and its applicationslink

정지훈; 이승섭; et al, 한국과학기술원, 2020

1832
표면 텍스처링 된 인공 고관절 재료의 마찰/마모 특성에 대한 연구 = (A) study on friction and wear characteristics of surface-textured hip implant materialslink

이현화; 양민양; et al, 한국과학기술원, 2018

1833
표면근전도 신호를 이용한 손가락들의 텐던 힘 추정 연구 = A study on estimating tendon forces of fingers using surface EMG signalslink

김평강; Kim, Pyungkang; et al, 한국과학기술원, 2017

1834
표면및 균열문제의 유한요소해석 = Finite element analysis of subsurface crack problemslink

이경식; Lee, Kyung-Sick; et al, 한국과학기술원, 1992

1835
표면실장기술에서 솔더 접합부 형상 해석 및 설계 응용 = Analysis of solder joint profile and application to design in SMTlink

최동필; Choi, Tong-Pil; et al, 한국과학기술원, 1999

1836
표준 길이 측정 원자현미경 용 나노 정밀도 스캐너의 설계 및 자가 보정을 통한 계통오차 보정 = The design of nano scanner and the calibration of systematic error using self-calibration for standard length measuring AFM(Atomic Force Microscope)link

김동민; Kim, Dong-Min; et al, 한국과학기술원, 2007

1837
프로팅링 저어널베어링에 대한 연구 = A Study on the floating ring journal bearinglink

정연민; Cheong, Yeon-Min; et al, 한국과학기술원, 1992

1838
플라즈마 디스플레이 패널(PDP)의 비접촉식 형광막 프린팅 공정에 관한 연구 = (A) study on non-contact printing process for phosphor layer deposition of PDPlink

이재학; Lee, Jae-Hak; et al, 한국과학기술원, 2009

1839
플라즈마 스프레이 프로세스를 고려한 열차폐 시스템의 유한요소 해석 = Finite element analysis of a thermal barrier coating system with plasma spraying processlink

이명재; Lee, Myung Jae; et al, 한국과학기술원, 2016

1840
플라즈몬 공명 현상을 이용한 극자외선(EUV)영역의 고차조화파 생성 = High harmonic generation in the range of EUV light by resonant plasmon field enhancementlink

김승철; Kim, Seung-Chul; et al, 한국과학기술원, 2009

rss_1.0 rss_2.0 atom_1.0