Browse "ME-Theses_Ph.D.(박사논문) " by Title 

Showing results 1641 to 1660 of 1907

1641
입경 측정을 위한 영상 처리 알고리즘의 개발에 관한 연구 = Development of image processing algorithm for particle size measurementlink

김유동; Kim, Yu-Dong; et al, 한국과학기술원, 2004

1642
입사에너지에 대한 방향성 가중함수를 이용한 다중격벽의 차음해석 = Analysis of the sound insulation of multi-layered partitions by using the directional weighting function for incidence energylink

강현주; Kang, Hyun-Ju; et al, 한국과학기술원, 2000

1643
입자강화 복합재의 열적 잔류응력에 대한 연구 = A study on residual stresses due to thermal mismatch in particle reinforced compositeslink

박상진; Park, Sang-Jin; et al, 한국과학기술원, 1998

1644
입체음향시스템을 위한 라우드스피커의 배치방법과 구동방법 = Arrangement and driving methods of loudspeakers for virtual sound localization systemlink

김선민; Kim, Sun-Min; et al, 한국과학기술원, 2004

1645
자가 보정을 이용한 정밀 기계의 계통오차 계산 = Self-calibration of systematic errors for precision machineslink

유승봉; Yoo, Seung-Bong; et al, 한국과학기술원, 2004

1646
자기 충격 액추에이터를 이용한 캡슐형 구동 기구 = The capsule type movement system with the magnetic impact actuatorslink

민현진; Min, Hyun-Jin; et al, 한국과학기술원, 2004

1647
자기베어링을 이용한 무진공챔버 초원심분리기에 관한 연구 = Study on vacuum chamber-free ultracentrifuge with magnetic bearingslink

박철훈; Park, Cheol Hoon; et al, 한국과학기술원, 2014

1648
자기예압 공기베어링 스테이지의 능동보정을 통한 초정밀 직선운동 특성에 관한 연구 = Study on ultraprecision straight motion by active compensation of air bearing stage with magnetic preloadlink

노승국; Ro, Seung-Kook; et al, 한국과학기술원, 2008

1649
자동차 구조용 복합재료 충격흡수봉에 관한 연구 = A study on the composite impact beams for an auto-bodylink

전성식; Cheon, Seong-Sik; et al, 한국과학기술원, 1999

1650
자동차 디자인에서 스케치 기반 3D 모델의 생성 = Sketch-based 3D model reconstruction in automotive designlink

천상욱; Cheon, Sang-Uk; et al, 한국과학기술원, 2008

1651
자동차용 강판 고속인장물성 데이터의 측정불확도 산출 = Measurement uncertainty evaluation for high strain rate tensile properties of auto-body steel sheetslink

정세환; Jeong, Se-Hwan; et al, 한국과학기술원, 2012

1652
자동화 제조 시스템의 시뮬레이션을 위한 JR-net 모델링 = Job resource relation-net modeling for the simulation of automated manufacturing systemlink

한관희; Han, Kwan-Hee; et al, 한국과학기술원, 1996

1653
자외선 경사 노광과 고분자 성형공정을 이용한 미세바늘 제작 공정 개발 및 제작된 미세바늘의 특성 분석 = The development of microneedles’ fabrication methods using inclined UV lithography and polymer molding process, and the analyses of the microneedles’ characteristicslink

한만희; Han, Man-hee; et al, 한국과학기술원, 2008

1654
자유곡면을 위한 5-축 정밀가공에 관한 연구 = A study on the 5-axis precision machining for sculptured surfaceslink

조현덕; Cho, Hyun-Deog; et al, 한국과학기술원, 1993

1655
자율 주행방식의 이동 로봇을 위한 경로 제어 알고리즘에 관한 연구 = A study on the path tracking control algorithm for free-ranging mobile robotslink

고경철; Koh, Kyoung-Chul; et al, 한국과학기술원, 1992

1656
작용-유도 분자 동역학을 이용한 나노시스템의 결함거동 연구 = A study on defect behaviors in nanosystems using action-derived molecular dynamics methodlink

이영민; Lee, Young-Min; et al, 한국과학기술원, 2010

1657
잔류응력장에서의 피로균열닫힘 거동의 유한요소해석 = Finite element analysis of fatigue crack closure behaviour in a residual stress fieldlink

최현창; Choi, Hyeon-Chang; et al, 한국과학기술원, 1994

1658
잡음 속에 묻힌 임펄스 소음원의 위치 추정 = Impulsive source localization in noisy environmentlink

최영철; Choi, Young-Chul; et al, 한국과학기술원, 2005

1659
재구성 가능한 능동적 영상 시스템을 이용한 마이크로MEMS 부품의 영상기반조립 = Visually guided assembly of micro MEMS parts using reconfigurable active vision systemlink

이덕영; Lee, Duk-Youn; et al, 한국과학기술원, 2010

1660
재료의 연성파단을 예측하기 위한 연속체 손상 항복 함수에 관한 연구 = A study on a continuum damage yield function to predict ductile fracture of materialslink

고윤기; Ko, Youn Ki; et al, 한국과학기술원, 2011

rss_1.0 rss_2.0 atom_1.0