MS-Theses_Master(석사논문)

Recent Items

Collection's Items (Sorted by Submit Date in Descending order): 1461 to 1480 of 2188

1461
고순도 Al-Zn-Mg-Cu 합금의 석출현상과 퇴화 및 재시효 처리 효과에 대한 Li첨가의 영향 = The effect of lithium on the precipitation and retrogression and reaging(RRA) treatment of high purity Al-Zn-Mg-Cu alloylink

서인식; Seo, In-Sig; 이재영; 박중근; et al, 한국과학기술원, 1990

1462
Sinter forging 공정으로 제조한 Bi-Pb-Sr-Ca-Cu-O 고온초전도체의 성질에 관한 연구 = A study on the properties of Bi-Pb-Sr-Ca-Cu-O high-Tc superconductor prepared by sinter forging processlink

서정대; Suh, Jung-Dai; et al, 한국과학기술원, 1990

1463
Al-Li-Cu-Mg 합금의 시효특성에 미치는 Mg의 효과 = The effects of Mg on aging characteristics of Al-Li-Cu-Mg alloyslink

신유균; Shin, Yu-Gyun; 이재영; 박중근; et al, 한국과학기술원, 1990

1464
플라즈마 화학증착법으로 제조한 수소함유-비정질 탄화규소의 광학적 특성에 관한 연구 = A study on the characteristics of the optical properties of hydrogenated amorphous silicon carbide prepared by PECVDlink

박장호; Park, Jang-Ho; et al, 한국과학기술원, 1990

1465
화학증착법으로 제조한 SiC 가 함유된 탄소/탄소 복합재료의 미세구조 및 기계적 특성에 관한 연구 = A study on the microstructure and mechanical properties of carbon/carbon composites Co-deposited with SiClink

박홍식; Park, Hong-Sik; et al, 한국과학기술원, 1989

1466
LiI/α-$Al_2O_3$ 고체 전해질의 이온 전도 특성에 미치는 $Al_2O_3$의 영향 = Effects of alumina content on the ionic conduction of lithium iodide/α-alumina solid electrolytelink

배준성; Bae, Joon-Sung; et al, 한국과학기술원, 1990

1467
Plasma 소결 조건이 알루미나 요업체의 소결거동과 미세구조에 미치는 효과 = Effect of plasma sintering conditions on sintering behavior and microstructure of alumina ceramicslink

문영태; Mun, Yung-Tae; et al, 한국과학기술원, 1990

1468
RTP를 이용하여 열처리한 polycide 구조에서 tungsten silicide 의 전기적 특성 = Electrical properties of tungsten silicide in polycide structure annealed by RTP methodlink

민병운; Min, Byoung-Woon; et al, 한국과학기술원, 1990

1469
Al-4%Mg 고용체 합금의 반복 응력 크립 변형 중 결정립 방위가 입계 균열에 미치는 영향 = The effect of grain orientation on grain boundary cracking during cyclic creep of Al-4%Mg solid solution alloylink

박사인; Park, Sa-In; et al, 한국과학기술원, 1990

1470
Fe-6wt.%Al-2.1wt.%C 합금에서의 K상 형성 기구및 morphology 변화 = K phase formation mechanism and morphology change in Fe-6wt.%Al-2.1wt.%C alloylink

김필중; Kim, Pil-Jung; et al, 한국과학기술원, 1990

1471
(A) study on the mechanical properties and microstructures of grain refined Cu-Al-Ni shape memory alloys = 결정립 미세화시킨 Cu-Al-Ni 형상기억합금의 기계적 성질과 미세조직에 관한 연구link

Roh, Dong-Wan; 노동완; et al, 한국과학기술원, 1990

1472
$CdS_{1-x}Te_x$ 소결막의 전기 및 광학적 성질 = Electrical and optical properties of sintered $CdS_{1-x}Te_x$ filmslink

문대규; Moon, Dae-Gyu; et al, 한국과학기술원, 1990

1473
플라즈마 화학증착법에 의하여 증착된 aluminum oxide 박막의 C-V 특성에 증착 변수가 미치는 영향 = The effect of deposition parameters on C-V characteristics of aluminum oxide thin films deposited by PECVDlink

김용천; Kim, Yong-Chun; et al, 한국과학기술원, 1990

1474
붕화티탄-니켈계 요업체에서의 소결거동에 관한 연구 = A study on the sintering behavior of $TiB_2-Ni$ based ceramicslink

김원주; Kim, Weon-Ju; et al, 한국과학기술원, 1990

1475
Al-18.6at%Zn 합금계에서 불연속 석출 현상에 미치는 Ge 첨가에의한 효과 = The effects of Ge on the discontinuous precipitation in an Al-18.6at%Znlink

김정균; Kim, Joung-Kyun; 이재영; 박중근; et al, 한국과학기술원, 1990

1476
$SrTiO_3$ 후막의 전기전도도 및 결함구저에 관한 연구 = A study on the electrical conductivity and defect structure in $SrTiO_3$ thick filmlink

김영호; Kim, Young-Ho; et al, 한국과학기술원, 1990

1477
Fe-Ni-Al-C 합금계에서의 상분해 현상과 기계적 성질 = The phase decomposition and mechanical properties of Fe-Ni-Al-C alloyslink

김용석; Kim, Yong-Seok; et al, 한국과학기술원, 1990

1478
스파터 방법으로 증착된 Cr 박막의 두께가 $Al_2O_3$ 기판과의 접착성에 미치는 효과 = The effect of sputter-deposited Cr film thickness on the adhesion of $Al_2O_3$ substratelink

김용식; Kim, Yong-Sic; 강석중; 유진; 김영호; Kang, Suk-Jung L.; et al, 한국과학기술원, 1990

1479
12% 크롬강의 고온 저주파 피로수명에 미치는 유지시간의 영향 = The effect of hold time on the high temperature low cycle fatigue life in 12%Cr steellink

공병욱; Kong, Byeong-Ook; et al, 한국과학기술원, 1990

1480
금속수소화합물을 이용하는 화학열펌프의 특성에 관한 연구 = A study on the characteristics of chemical heat pump using metal hydrideslink

권기원; Kwon, Kee-Won; et al, 한국과학기술원, 1990

rss_1.0 rss_2.0 atom_1.0