Browse "MS-Theses_Master(석사논문)" by Author 박중근

Showing results 1 to 48 of 48

1
0.15C-1.5Mn 강에서 V-Ti 복합첨가가 석출 및 페라이트 결정립 성장 거동에 미치는 영향 = Effect of the V-Ti composite addition on the precipitation and ferrite grain growth behavior in 0.15C-1.5Mn steellink

옥순영; Ok, Soon-Young; et al, 한국과학기술원, 1999

2
304 스테인레스강의 저온 질화에 관한 연구 = Low temperature gaseous nitriding of 304 stainless steellink

김태형; Kim, Tae-Hyung; et al, 한국과학기술원, 2008

3
Al-0.5wt.%Cu 박막의 결정립성장과 Si 첨가 효과 = Grain growth of thin films of an Al-0.5WT.%Cu alloy and the effect of Si additionlink

박권식; Park, Kwon-Shik; et al, 한국과학기술원, 1993

4
Al-14.6at%Zn 합금에서 불연속 석출의 발생및 성장속도론과 이에 대한 연속석출의 영향 = The initiation and growth kinetics of discontinuous precipitation in an Al-14.6at%Zn alloy and the effects of continuous precipitationlink

김원준; Kim, Won-Jun; et al, 한국과학기술원, 1988

5
Al-18.6at%Zn 합금계에서 불연속 석출 현상에 미치는 Ge 첨가에의한 효과 = The effects of Ge on the discontinuous precipitation in an Al-18.6at%Znlink

김정균; Kim, Joung-Kyun; 이재영; 박중근; et al, 한국과학기술원, 1990

6
Al-Li 합금의 시효특성에 미치는 Mg 첨가효과 = The effects of Mg on aging characteristics of Al-Li alloyslink

김제덕; Kim, Je-Deok; et al, 한국과학기술원, 1989

7
Al-Li-(Zr)이원합금의 시효특성에 미치는 copper첨가의 영향 = The effects of Cu addition on the aging characteristics of Al-Li binary alloyslink

이승석; Lee, Seaung-Suk; et al, 한국과학기술원, 1989

8
Al-Li-Cu-Mg 합금의 시효특성에 미치는 Mg의 효과 = The effects of Mg on aging characteristics of Al-Li-Cu-Mg alloyslink

신유균; Shin, Yu-Gyun; 이재영; 박중근; et al, 한국과학기술원, 1990

9
Al-Li-Cu-Mg-Ag-(-Zr) 합금의 석출현상에 관한 연구 = Study of the precipitation behavior in Al-Li-Cu-Mg-Ag(-Zr) alloyslink

이병찬; Lee, Byung-Chan; et al, 한국과학기술원, 1992

10
Al-Li-Cu-Mg-Ag-Zr 합금의 석출 및 기계적 성질에 미치는 Ag와 Li/Cu비의 영향 = The effects of Ag and Li/Cu ratio on the precipitation and mechanical properties of Al-Li-Cu-Mg-Ag-Zr alloyslink

박지영; Park, Ji-Yong; et al, 한국과학기술원, 1995

11
Al-Li-Cu-Mg합금의 시효특성 및 기계적 성질에 대한 Mg 의 영향 = The effects of Mg on the aging characteristics and mechanical properties of Al-Li-Cu-Mg alloyslink

전성민; Jeon, Seong-Min; 이재영; 박중근; et al, 한국과학기술원, 1990

12
Al-Li합금의 시효특성과 강화기구 = Aging characteristics and strengthening mechanisms in Al-Li alloyslink

정우상; Jung, Woo-Sang; et al, 한국과학기술원, 1988

13
Al-Zn 합금에서 불연속 석출의 성장기구 = Growth mechanisms of discontinuous precipitation in Al-Zn alloyslink

이호기; Yi, Ho-Gi; et al, 한국과학기술원, 1987

14
AlN이 V-microalloyed 중탄소강의 오스테나이트 결정립 조대화에 미치는 영향 = Effect of AlN on the austenite grain coarsening of the vanadium micro-alloyed medium carbon steellink

정태식; Jung, Tae Sik; et al, 한국과학기술원, 2012

15
Co-Cr/Cr 박막의 열처리에 따른 자기적 성질의 변화 = The effects of heat-treatments on the magnetic properties of Co-Cr-Cr thin filmslink

정우석; Cheong, Woo-Seock; et al, 한국과학기술원, 1994

16
CoCrX계 수평자기기록매체의 자성특성에 미치는 비정질 FeTi 씨앗층의 효과 = Effect of amorphous FeTi seedlayer on the magnetic properties of CoCrX longitudinal magnetic recording medialink

강용진; Kang, Yong-Jin; et al, 한국과학기술원, 2003

17
CoPt 자성박막의 미세조직과 자성성질에 미치는 in-situ annealing의 효과 = Effect of in-situ annealing on the microstructure and magnetic properties of CoPt magnetic thin filmlink

배형빈; Bae, Hyung-Bin; et al, 한국과학기술원, 2005

18
Cu/Li비가 높은 Al-Li-Cu-Mg-Ag(-Zr)합금의 석출 현상에 관한 연구 = Study of the precipitation behavior in Al-Li-Cu-Mg-Ag(-Zr) alloys with high Cu/Li rationlink

윤광희; Yun, Kwang-Hee; et al, 한국과학기술원, 1994

19
Effect of particles on the grain growth of austenite in microalloyed low carbon steels = Microalloyed 저탄소강에서 오스테나이트 결정립 성장에 미치는 입자의 영향link

Ali, Ashraf; Ali, Ashraf; et al, 한국과학기술원, 2013

20
$Hf/(NiFe)_{1-x}Co_x/Cu/(NiFe)_{1-x}Co_x/FeMn$ 스핀밸브 구조의 증착조건 변화에 따른 GMR 특성 연구 = A study on the GMR properties of $Hf/(NiFe)_{1-x}Co_x/Cu/(NiFe)_{1-x}Co_x/FeMn$ spin valve structurelink

김만철; Kim, Man-Cheol; et al, 한국과학기술원, 2003

21
Lorentz TEM을 이용한 $FePt/C_n(n = 0,1,4)$ 자성박막의 자구조직에 관한 연구link

김단아; kim, Dan-A; et al, 한국과학기술원, 2007

22
Lorentz TEM을 이용한 자기기록용 C:FePt 자성박막의 자구조직에 관한 연구 = Study of magnetic domain structures of C:FePt magnetic thin films by Lorentz TEMlink

오서종; Oh, Seo-Jong; et al, 한국과학기술원, 2006

23
RRA 열처리가 공업용 7050 Al합금의 시효특성과 내응력 부식성에 미치는 영향 = The effect of RRA treatment on the aging characteristics and stress corrosion susceptibility of commercial 7050 Al alloylink

장한성; Zhang, Han-Sung; et al, 한국과학기술원, 1988

24
RRA 처리가 고순도 Al-Zn-Mg 합금의 강도 및 내응력 부식성에 미치는 영향에 관한 연구 = A study on the effect of the retrogression and reaging treatments on the strength and susceptibility to stress corrosion cracking of high purity Al-Zn-Mg alloylink

구형균; Goo, Hyeong-Gyun; et al, 한국과학기술원, 1986

25
$SiC_p$/6061Al 복합재료의 미세조직과 석출거동에 관한 연구 = A study of the microstructure and the precipitation behavior of the $SiC_p$/6061Al compositeslink

김두현; Kim, Doo-Hyun; et al, 한국과학기술원, 1991

26
Ta/NiFe/Cu/NiFe/FeMn계 스핀밸브에서 하지층의 증착 조건이 미세구조와 교환결합에 미치는 영향 = Effect of deposition conditions of underlayers on the microstructure and the exchange anisotropy in Ta/NiFe/Cu/NiFe/FeMn spin valvelink

박병욱; Park, Byung-Wook; et al, 한국과학기술원, 2001

27
TEM을 이용한 L10 FePt (001) 자성박막의 미세조직과 자기적 특성에 관한 연구 = A study of the microstructure and the magnetic property of L10 FePt (001) magnetic thin film using TEMlink

김아람; Kim, A-Ram; et al, 한국과학기술원, 2014

28
Thermo-calc를 이용한 듀플렉스 스테인리스강의 상평형 계산: $Cr_2$ N 상안정성과 석출속도에 미치는 nitrogen의 영향 = Calculation of phase equilibria of duplex stainless steels using thermo-calc : effects of nitrogen on the phase stability and kinetics of $Cr_2$ Nlink

박상희; Park, Sang-Hee; et al, 한국과학기술원, 2001

29
Ti 미량합금강에서 탄질화물의 석출거동과 오스테나이트 결정립 성장거동에 미치는 탄소함량 변화와 Nb 복합첨가의 영향 = Influence of Nb addition and carbon content on the precipitation behavior of carbonitride and on the austenite grain growth in a Ti-microalloyed steellink

허태형; Huh, Tae-Hyoung; et al, 한국과학기술원, 1997

30
Ti 증착 조건이 Ti 박막의 잔류 응력 및 Ti 실리사이드 형성에 미치는 영향에 관한 연구 = Study on the effects of Ti deposition conditions on the residual stress of Ti thin film and on Ti silicide formationlink

이택영; Lee, Taek-Yeong; et al, 한국과학기술원, 1995

31
Ti 첨가강에서 탄질화물의 석출거동이 오스테나이트 결정립 성장에 미치는 영향 = Effect of the precipitation behavior of carbonitrides on the austenite grain growth in Ti microalloyed steelslink

윤여분; Yoon, Yeo-Boon; et al, 한국과학기술원, 1996

32
Ti-(40∼52at%)Al-2at%Cr-(4at%Nb)-(0.4at%B) 합금의 미세조직과 상안정에 미치는 Nb과 B첨가 효과 = Effect of Nb and B additions on the microstructures and phase stability of Ti-(40∼52at%)Al-2at%Cr-(4at%Nb)-(0.4at%B) alloyslink

김성곤; Kim, Seong-Kon; et al, 한국과학기술원, 1996

33
Ti-44at%Al 금속간 화합물에서 층상조직의 불연속 조대화에 관한 연구 = Discontiunous coarsening of lamellar precipitates in a Ti-44at%Al intermetallic compoundlink

이영철; Lee, Young-Cheol; et al, 한국과학기술원, 1993

34
Ti-44at.%Al-0.5at.%Nb 금속간화합물에서의 불연속조대화에 관한 연구 = A study on the discontinuous coarsening of lamellar structure in Ti-44at.%Al-0.5at.%Nb intermetallic compoundlink

이충열; Lee, Choong-Youl; et al, 한국과학기술원, 1994

35
Ti-6Zr-6Nb-6Sn 합금의 고온 변형 거동에 관한 연구 = Study on high temperature deformation behavior of Ti-6Zr-6Nb-6Sn alloylink

오민석; O, Min-Seok; et al, 한국과학기술원, 1998

36
Zirconium에 있어서의 수소의 확산 = Diffusion of hydrogen in zirconiumlink

박중근; Park, Joong-Keun; et al, 한국과학기술원, 1976

37
γ'석출물 크기 변화에 따른 니켈기 초내열합금에서의 재결정 = The recrystallization in a Ni-base superalloy of varying γ'-precipitatelink

이성보; Lee, Sung-Bo; et al, 한국과학기술원, 1994

38
고순도 Al-Zn-Mg 합금의 석출 현상과 RRA 처리 효과에 대한 Cu 첨가의 영향 = Effects of copper on the precipitation and retrogression and reaging (RRA) treatments of high purity Al-Zn-Mg alloylink

김병훈; Kim, Byung-Hoon; et al, 한국과학기술원, 1987

39
고순도 Al-Zn-Mg-Cu 합금의 석출현상과 퇴화 및 재시효 처리 효과에 대한 Li첨가의 영향 = The effect of lithium on the precipitation and retrogression and reaging(RRA) treatment of high purity Al-Zn-Mg-Cu alloylink

서인식; Seo, In-Sig; 이재영; 박중근; et al, 한국과학기술원, 1990

40
고순도 Al-Zn-Mg-Cu계 합금의 퇴화 및 재 시효거동에 미치는 Zn의 영향 = The effect of zinc on the retrogression and reaging behavior of high purity Al-Zn-Mg-Culink

이성권; Lee, Sung-Gwon; et al, 한국과학기술원, 1989

41
공업용 7075Al 합금의 강도및 내응력 부식성에 미치는 RRA 열처리의 영향에 관한 연구 = A study of the effects of retrogression and reaging treatments on the strength and stress corrosion cracking susceptibility of commercial 7075 aluminum alloylink

남효학; Nam, Hyo-Hak; et al, 한국과학기술원, 1986

42
분무주조 공정이 고속도공구강의 탄화물 미세 조직에 미치는 영향 = Effect of spray forming process on the carbide microstructure of high speed steelslink

김관호; Kim, Kwan-Ho; et al, 한국과학기술원, 2000

43
스퍼터링으로 증착한 Cr 박막과 Co/Cr 다층박막의 표면응력변화 실시간측정 = In-situ measurements of the surface stress evolution during sputtering deposition of Cr and Co/Cr thin filmslink

하걸욱; Ha, Gul-Wook; et al, 한국과학기술원, 2004

44
자기기록용 CoPt 자성박막의 자성특성에 미치는 열처리 및 증착 조건에 관한 연구 = Study on the influence of post-annealing and deposition conditions on magnetic properties of CoPt magnetic thin film for recording medialink

오동연; Oh, Dong-Yun; et al, 한국과학기술원, 1999

45
자기기록용 FePt 자성박막의 자구조직과 texture 제어에 관한 연구 = Magnetization structure and texture control of fept thin film for magnetic recording medialink

이완희; Lee, Wan-Heui; et al, 한국과학기술원, 2009

46
자기기록용 FePt 자성박막의 자성특성에 미치는 CrTi 하지막의 효과 = Effect of CrTi underlayer on the magnetic properties of FePt thin film for magnetic recording medialink

은성호; Eun, Sung-Ho; et al, 한국과학기술원, 2006

47
자성층의 조성과 증착 조건 변화가 Ta/NiFeCo/Cu/NiFeCo/FeMn 다층박막의 거대자기저항 특성에 미치는 영향 = Effect of the variation of the magnetic layer composition and deposition conditions on the giant-magnetoresistance property of Ta/NiFeCo/Cu/NiFeCo/FeMn thin film multilayerlink

김홍원; Kim, Hong-Won; et al, 한국과학기술원, 2002

48
코스퍼터링 $TiSi_2$ 박막의 상변태(C49→C54)와 응력해석 = Phase transformation (C49→C54) of $TiSi_2$ Co-Sputtered thin film and stress analysislink

김종환; Kim, Jong-Hwan; et al, 한국과학기술원, 1997

rss_1.0 rss_2.0 atom_1.0