1 | (A) study of sintering and dielectric properties of textured $BaTiO_3$ ceramics by templated grain growth = 템플릿 입성장 기법으로 제작된 배향성 티탄산바륨의 소결 및 유전 특성에 관한 연구link Lee, Seung Yong; Kim, Do Kyung; et al, 한국과학기술원, 2020 |
2 | (A) study on cobalt-substituted $Na_4Mn_3($PO_4$)_2($P_2O_7$)$ as a cathode material for Na-ion batteries = 나트륨이온전지 양극용 Co가 치환된 $Na_4Mn_3($PO_4$)_2($P_2O_7$)$ 에 관한 연구link Ryu, Soojy; Kim, Do Kyung; et al, 한국과학기술원, 2018 |
3 | $Al_2O_3-TiC-Ti$ 복합체의 연소헙성과 치밀화 = Combustion synthesis and densification of $Al_2O_3-TiC-Ti$ compositeslink 조철희; Cho, Churl-Hee; et al, 한국과학기술원, 1996 |
4 | Characterization of thermal conductivity and mechanical property of pressureless sintered silicon nitride ceramics = 상압 소결 질화규소 세라믹의 열전도성 및 기계적 특성 평가 연구link 공정훈; Kim, Do Kyung; et al, 한국과학기술원, 2018 |
5 | CsI(Na) 섬광체 박막의 광 발생 특성에 관한 연구 = A study on the characteristics of light output In CsI(Na) scintillating thin filmlink 이경수; Lee, Kyung-Soo; 김도경; 배병수; et al, 한국과학기술원, 1998 |
6 | Cu-O Eutectic melt 에 의한 alumina 소결체와 전해동의 접합 = Alumina ceramic-to-copper bonding by Cu-Oeutectic meltlink 김도경; Kim, Do-Kyeong; et al, 한국과학기술원, 1984 |
7 | Dense Li1.5Al0.5Ge1.5(PO4)3 ceramics with 2D-MoS2 interlayer for all-solid-state lithium metal batteries = 고체 전해질 Li1.5Al0.5Ge1.5(PO4)3의 상압 소결과 2D-MoS2 계면 처리된 전고체 전지에 관한 연구link Baek, Seung Jin; Kim, Do Kyung; et al, 한국과학기술원, 2021 |
8 | Design and characterization of one-dimensional carbon-based cathode for lithium-sulfur batteries = 리튬 황 전지용 1차원 탄소 기반 양극 물질의 설계 및 특성 평가에 관한 연구link Yun, Jong Hyuk; Kim, Do Kyung; et al, 한국과학기술원, 2017 |
9 | Design of sulfur cathode with 1-D carbon nanostructures for high-performance lithium-sulfur batteries = 일차원 나노탄소구조 기반의 양극구조 및 이를 활용한 리튬-황 전지의 특성 평가에 관한 연구link Yang, Sung Jin; Kim, Do Kyung; et al, 한국과학기술원, 2022 |
10 | Effect of an adhesive interlayer on the fracture of a brittle coating on a supporting substrate = 취성 코팅 재료에서 접착층이 코팅층 파괴에 미치는 영향link Kim, Jong-Ho; 김종호; et al, 한국과학기술원, 2003 |
11 | Effect of SiO2 addition on the performance of high voltage spinel LiNi0.5Mn1.5O4 as a cathode material for li-ion batteries = 리튬이온전지용 고전압 스피넬 LiNi0.5Mn1.5O4 양극소재의 SiO2 첨가에 따른 전기화학적 특성 연구link Nisar, Umair; Nisar, Umair; et al, 한국과학기술원, 2013 |
12 | Enhanced Li-metal interphase stability of argyrodite Li6+xSixP1-xS5Cl solid electrolytes by silicon substitution = 전고체전지용 Li-Argyrodite 황화물 고체전해질의 실리콘 치환에 의한 리튬 금속 계면 안정성 향상에 관한 연구link Song, Jung Hwan; Kim, Do Kyung; et al, 한국과학기술원, 2023 |
13 | Fabrication of dense 1-D carbon assembly via spray drying method for lithium-sulfur battery = 리튬-황 배터리의 분무 건조 방식을 통한 조밀한 1차원 탄소 어셈블리 제작link Jarrah, Ubaidah Ibnul; Kim, Do Kyung; et al, 한국과학기술원, 2023 |
14 | Hydrothermal synthesis and characterization of rare-earth doped BaTiO3 nanoparticles = 희토류 원소가 치환된 티탄산바륨 나노분말의 수열합성과 특성 분석link Oh, Sung chan; Kim, Do Kyung; et al, 한국과학기술원, 2021 |
15 | Investigation on ionic conductivity enhancement of potassium-substituted NASICON solid electrolyte for sodium Ion batteries = 나트륨 이온 전지용 칼륨이 치환된 NASICON 고체 전해질의 이온 전도성 향상에 대한 연구link Heo, Eunseok; Kim, Do Kyung; et al, 한국과학기술원, 2019 |
16 | Microstructure development and characterization of dipping exothermic reaction infiltrated $B_4C-TiAl_x$ composites = 용탕 함침 공정에 의한 $B_4C-TiAl_x$ 복합 재료의 미세 조직 개발과 특성 평가link Ansari, Haris Masood; 안사리, 하리스 마수드; et al, 한국과학기술원, 2004 |
17 | NADH가 캡슐화된 졸-겔 실리카 겔의 흡광 및 형광 = Optical absorption and fluorescence of NADH encapsulated Sol-Gel silica gellink 홍혜정; Hong, Hye-Joung; 배병수; 김도경; et al, 한국과학기술원, 2000 |
18 | Photobleaching of γ-Glycidoxypropyltrimethoxysilane-Chelated metal alkoxide gel film = γ-Glycidoxypropyltrimethoxysilane-Chelated metal alkoxide 겔 막의 광표백link Kim, Hun-Rae; 김훈래; Bae, Byeong-Soo; Kim, Do-Kyung; et al, 한국과학기술원, 2000 |
19 | Reaction sintering of dense LATP solid-state electrolyte ceramics for all-solid-state lithium-ion batteries = 전고체 리튬 이온 전지용 고밀도 LATP 고체 전해질 세라믹의 반응 소결link Kim, Dong Gyu; Kim, Do Kyung; et al, 한국과학기술원, 2019 |
20 | Reaction Sintering Process and Characterization of NASICON Solid Electrolyte Ceramics = NASICON 고체 전해질 세라믹스의 반응 소결 공정 및 특성 평가link Jung, Sewoon; Kim, Do Kyung; et al, 한국과학기술원, 2017 |
21 | $Si_3N_4/BN$계 층상세라믹스와 섬유상세라믹스의 제조 및 열적 기계적 성질 = Preparation and characterization of $Si_3N_4/BN$ ceramic laminates and fibrous monolithic ceramicslink 이시우; Lee, Shi-Woo; et al, 한국과학기술원, 1997 |
22 | SiAlON 세라믹의 조성변화가 마이크로파 유전특성에 미치는 영향 = Effect of composition of SiAlON ceramics on microwave dielectric propertieslink 김하늘; Kim, Ha-Neul; et al, 한국과학기술원, 2005 |
23 | Surface functionalized reduced graphene oxide-sulfur composite as a cathode material for high performance lithium-sulfur batteries = 고성능 리튬-황 전지용 환원 그래핀 옥사이드-황 양극 물질에 관한 연구link Abdul Ahad, Syed; Kim, Do Kyung; et al, 한국과학기술원, 2016 |
24 | Synthesis and characterization of $Y_2O_3-MgO$ nanocomposite for infrared transparent ceramics = 적외선 영역 투명세라믹용 산화 이트륨-산화 마그네슘 나노복합체의 합성 및 특성 평가에 관한 연구link Ma, Ho Jin; 마호진; et al, 한국과학기술원, 2016 |
25 | Synthesis and characterization of one-dimensional BaTiO3 nanoribbons = 일차원 BaTiO3 나노리본의 합성 및 특성 평가에 관한 연구link 박영태; Kim, Do Kyung; et al, 한국과학기술원, 2018 |
26 | Synthesis of Nano-Sized BaTiO3 by solid-state reaction between $BaCO_3$ and $TiO_2$ = $BaCO_3$ 와 $TiO_2$ 의 고상 반응법에 의한 $BaTiO_3$ 나노입자 합성link Manzoor, Umair; 만주르, 우메르; et al, 한국과학기술원, 2002 |
27 | Synthesis of One-dimensional spinel lithium manganese oxide nanostructures for lithium ion battery = 스피넬 구조를 가지는 비등방성 리튬 망간 산화물 나노구조 합성 연구link Lee, Hyun-Wook; 이현욱; et al, 한국과학기술원, 2009 |
28 | Synthesis of tungsten oxide nanostructures and electrochromic property of LB films = 텅스텐 산화물 나노 구조의 합성과 LB 박막의 전기변색 특성link Jung, Young-Hwa; 정영화; et al, 한국과학기술원, 2005 |
29 | Synthesis, electrochemical properties of SnS/rGO nanocomposite as a negative electrode material for na-ion battery = 소듐 이온 전지용 음극 물질로써의 주석 황화물/그래핀 옥사이드 나노화합물의 합성 및 전기화학적 특성에 관한 연구link Kim, Joo-Hyung; 김주형; et al, 한국과학기술원, 2014 |
30 | $ZrO_2$ 겔의 수열결정화 및 상안정화제의 도핑 = Hydrothermal crystallization of $ZrO_2$ gel and its doping with phase stabilizerlink 김명희; Jin, Mingji; 김도경; 배병수; et al, 한국과학기술원, 1998 |
31 | 가압 소결된 HfC 및 TaC 초고온 세라믹스의 고온 산화 특성 평가 = Oxidation of HfC and TaC based ultra-high temperature ceramicslink 이상보; Lee, Sang-Bo; et al, 한국과학기술원, 2010 |
32 | 고열전도성 질화 알루미늄 세라믹의 저온 소결 및 특성평가에 관한 연구 = Low temperature sintered aln ceramics and characterization of electrical and thermal conductivitylink 이지석; Lee, Ji-seoc; et al, 한국과학기술원, 2011 |
33 | 고체 산화물 연료 전지용 세리아계 나노 분말의 합성 및 소결 거동 연구 = Synthesis and sintering behavior of $CeO_2$ based nano powders for solid oxide fuel celllink 조승환; Jo, Seung-Hwan; et al, 한국과학기술원, 2006 |
34 | 광자결정용 단분산 구형 $SiO_2$ 입자합성 및 자기조립 = Synthesis of monodispersed spherical $SiO_2$ and self-assembly for photonic crystalslink 이병기; Lee, Byung-Kee; et al, 한국과학기술원, 2003 |
35 | 기공 특성이 다공성 세라믹스의 역학적 성질에 미치는 영향 = Effect of pore characteristics on mechanical properties of porous ceramicslink 하장훈; Ha, Jang-Hoon; et al, 한국과학기술원, 2004 |
36 | 나노인덴터를 활용한 RF MEMS 스위치의 신뢰성 평가 연구 = Characterization of contact reliability in RF MEMS switch using nano-indenterlink 김동석; Kim, Dong-Seok; et al, 한국과학기술원, 2010 |
37 | 내부 압력 인가 법을 통한 입자형 핵연료의 탄화규소 코팅 층에 대한 파괴 강도 평가 = Characterization of the fracture strength for SiC coating layer in TRISO fuel particles by internal pressurization testlink 김민우; Kim, Min-U; 김도경; Kim, Do-Kyung; et al, 한국과학기술원, 2008 |
38 | 부분 상변태된 seed 종자 입자가 SiC 의 미세구조에 미치는 영향 = Effect of partially transformed seed particles on microstructure of silicon carbidelink 구봉진; Ku, Bong-Jin; et al, 한국과학기술원, 1997 |
39 | 붕화 지르코늄 - 탄화 규소 복합체에서 혼합 붕화물이 산화 거동에 미치는 영향 = The oxidation behavior of mixed boride in ZrB2 - SiC compositelink 이승준; Lee, Seung-Jun; 김도경; Kim, Do-Kyung; et al, 한국과학기술원, 2008 |
40 | 수열합성법에 의한 CdTe 나노선 합성에 관한 연구 = Hydrothermal synthesis of CdTe nanowireslink 용석민; Yong, Seok-Min; et al, 한국과학기술원, 2010 |
41 | 수열합성법에 의한 고결정 $BaTiO_3$ 나노 입자 합성에 관한 연구 = Hydrothermal synthesis of nano-sized $BaTio-3$ powder with high tetragonalitylink 문산; Moon, San; et al, 한국과학기술원, 2011 |
42 | 수열합성법에 의한 초미립 BaTiO3 나노분말 합성 및 특성 평가에 관한 연구 = Hydrothermal synthesis of ultrafine BaTiO3 nanopowder and its characterizationlink 백창연; Baek, Chang-Yeon; et al, 한국과학기술원, 2013 |
43 | 수열합성법으로 제조된 $ZrO_2$ 나노 분말의 특징과 소결 거동 = Characteristics and sintering behavior of hydrothermally synthesized $ZrO_2$ nano powderslink 최홍구; Choi, Hong-Goo; et al, 한국과학기술원, 2000 |
44 | 알루미나 세라믹스에서 입계상이 접촉 손상 거동에 미치는 영향 = The effect of grain boundary phase on contact damage resistance of $Al_2O_3$ ceramicslink 김재헌; Kim, Jae-Hun; et al, 한국과학기술원, 1998 |
45 | 연소합성에 의한 초미립 $TiB_2$ 입자의 합성에 관한 연구 = Combustion synthesis of fine $TiB_2$ particleslink 이종무; Lee, Jong-Moo; et al, 한국과학기술원, 2001 |
46 | 입자형 핵연료에 응용되는 CVD 탄화규소 코팅 층의 특성 평가 = Characterization of CVD silicon carbide coating layer application for nuclear fuel particlelink 이현근; Lee, Hyeon-Keun; et al, 한국과학기술원, 2006 |
47 | 입자형 핵연료에 응용되는 화학 기상 증착된 탄화규소 코팅층의 고온강도 평가 = Characterization of the high temperature fracture strength of CVD-SiC coating layers for TRISO nuclear fuel particleslink 박귀일; Park, Kwi-Il; et al, 한국과학기술원, 2009 |
48 | 저온 소결 질화 알루미늄 세라믹의 열전도성 및 기계적 특성 평가 연구 = Characterization of thermal conductivity and mechanical property of low-temperature-sintered aluminum nitride ceramicslink 이현민; 김도경; et al, 한국과학기술원, 2012 |
49 | 저온작동 연료전지용 LSGM 페로브스카이트계 전해질의 특성 개선 연구 = Synthesis and characterization of LSGM solid electrolyte for solid oxide fuel celllink 성영훈; Seong, Young-Hoon; et al, 한국과학기술원, 2007 |
50 | 초전도체 $MgB_2$ 분말합성과 저압 치밀화 연구 = Powder synthesis and low-pressure sintering of $MgB_2$ superconductorlink 박제형; Park, Je-Hyeong; et al, 한국과학기술원, 2002 |