DSpace at KOASAS
Browsing DSpace

Browse "RIMS Journal Papers" by Author y.g. kim

A to Z

All 0-9

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

or enter first few letters:

Showing results 1 to 26 of 26

1
Anelasticity of a Mixed Alkali Silicate Glass at high Pressures

y.g. kim; m. wutting, PHYSICS AND CHEMISTRY OF GLASSES, v.12, no.1, pp.8 - 10, 1971

2
Composition Dependance of Aging Kinetics in Some Cu-Al-Ni Shape Memory Alloys

y.g. kim; e.s. lee, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.21, no.6, pp.1681 - 1687, 1990-06

3
Creep-Rupture Behavior of Mechanically Alloyed Ni-Base Superalloy(MA6000E)

y.g. kim; h.f. merrick, 대한금속·재료학회지, v.20, no.1, pp.32 - 39, 1982

4
Designing an Advanced Copper-Alloy Leadframe Material

y.g. kim; c. ryu, SEMICONDUCTOR INTERNATIONAL, v.8, no.4, pp.250 - 253, 1985-04

5
Development of a High-Strength and Good-Stiffness Cu-base Alloy

y.g. kim; t.j. cho; i.d.kim, METALLURGICAL TRANSACTIONS, v.22, pp.256 - 258, 1991

6
Development of Χ70 HSLA Steel Strip for Arctic Linepipe Application

y.g. kim; t.w. kim, 대한금속·재료학회지, v.24, no.12, pp.1279 - 1289, 1986

7
Effect of Decarburization and Normalizing Heat Treatment in Boron Silicon-Iron Alloy

y.g. kim; h.b. im; h.g. lee, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.17, pp.1353 - 1359, 1986-08

8
Effect of Heat Treatment on Precipitation Behavior in a Cu-Ni-Si-P Alloy

y.g. kim; t.y. seoung; j.h. han; a.j. ardell, JOURNAL OF MATERIALS SCIENCE, v.21, pp.1357 - 1362, 1986

9
Effect of Repeated Thermal Cyclings on the Transformation Behavior, Microstructure and Mechanical Properties in a Co-free W-bearing Maraging Steel (W-250)

y.g. kim; c.n. park, MATERIALS SCIENCE AND ENGINEERING, v.123, pp.225 - 226, 1990

10
Effect of Substituting Ti for V on Mechanical Properties of Weathering HSLA Steel

y.g. kim; k.b. kang, 대한금속·재료학회지, v.23, no.7, pp.671 - 677, 1985

11
Effect of Substituting W for Mo on Mechanical Behavior in a high Strength Structural Alloy Steel(USS"T-1")

y.g. kim; s.b. kang, 대한금속·재료학회지, v.20, no.8, pp.661 - 671, 1982

12
Effect of Substituting W for Mo on Mechanical Properties in AlSl 4340

y.g. kim; c.n. park; s.b. kang, 대한금속·재료학회지, v.21, no.11, pp.1061 - 1068, 1985

13
Effect of Zieconium Addition to a Cu-Al-Ni Shape Memoty Alloy on Microstructure and tensile Properties

y.g. kim; j.w. kim; e.s. lee; d.w. roh, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.21, pp.741 - 744, 1990

14
Effects of Carbon content on the Secondary Recrystallisation in 3% Si Magnetic Steel

y.g. kim; j.s. song; 임호빈, 대한금속·재료학회지, v.20, no.8, pp.672 - 676, 1982

15
EFFECTS OF ORDERING TYPE AND DEGREE ON MONOCLINIC DISTORTION OF 18R-TYPE MARTENSITE IN CU-ZN-AL ALLOYS

y.g. kim; d.w. roh; e.s.lee, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.23, no.10, pp.2753 - 2760, 1992

16
Effects of Titanium and Post-rolling Heat Treatments on the Fatigue Bechvior of High Strength Low Alloy Steels

y.g. kim; j.w. hong, MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, v.61, no.3, pp.275 - 282, 1983

17
Influence of Oxygen on the Structure of Nd-rich Phase in the Sintered Nd15Fe77B8 Magnet

y.g. kim; j.p. yang; s.h. pi; y.p. kim, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, v.110, no.3, pp.L261 - L263, 1992-05

18
Lattice Parameters of Boron-Doped Ni3Al Alloys

y.g. kim; g.w. yoon; n.s. stoloff, JOURNAL OF MATERIALS SCIENCE LETTERS, v.4, pp.1407 - 1408, 1985

19
Low Cycle Fatigue Begavior of a Co-free W-Bearing Maraging Steel

y.g. kim; c.s. lee; g.s. kim, MATERIALS SCIENCE AND ENGINEERING, v.89, pp.17 - 24, 1987

20
Low Cycle Fatigue Behavior of Austenitec Fe-26Mn and Fe-26Mn-4Al Alloys

y.g. kim; j.s. lee, MATERIALS SCIENCE AND ENGINEERING, v.125, pp.49 - 56, 1990

21
Low Temperature Mechanical Behavior of Microalloyed and controlled-Rolled Fe-Mn-Al-C-X Alloys

y.g. kim; y.s. park; j.k. han, METALLURGICAL TRANSACTIONS. A, v.16, pp.1689 - 1692, 1985

22
Micorsructure and Mechanical Properties of a Co-free-W-bearing Maraging Steel

y.g. kim; g.s. kim; c.s. lee; d.n. lee, MATERIALS SCIENCE AND ENGINEERING, v.83, pp.75 - 86, 1986

23
The Effect of Descaling Treatments on Intermetallic Formation and Thermomechanical Stability of an Electroplated Tin/Lead Layer in a Semiconductor Leadframe Alloy

y.g. kim; t.y. chung; t.j. cho, JOURNAL OF MATERIALS SCIENCE LETTERS, v.13, pp.1465 - 1468, 1994

24
The Influence of Alloy Composition on Transformation Temperatures in Cu-Zn-Al Shape Memory Alloys

y.g. kim; y.s. han, 대한금속학회지, v.24, no.2, pp.142 - 148, 1986

25
The Influence of Coating Treatment and Directional Solidification in a Ni-Base Superalloy

y.g. kim; s.b. kang; h.m. kim; h.g. lee, MATERIALS SCIENCE AND ENGINEERING, v.83, no.1, pp.75 - 86, 1986

26
The Roles of Deformation Twin on Tensile Elongation and Low Cycle Fatigue Behavior of Austenitic Fe-30Mn-1.2Al-0.3C alloy

y.g. kim; j.m. han; c.y. lim, ACTA METALLURGICA ET MATERIALIA, v.39, no.9, pp.2169 - 2175, 1991

Discover

Type

Open Access

Date issued

. next

Subject

. next

rss_1.0 rss_2.0 atom_1.0