Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Article

Showing results 3081 to 3100 of 15753

3081
CURRENT-DENSITY AND HEAT-GENERATION RATE IN THE NEIGHBORHOOD OF A SINGLE-LINE CONTACT WITH VARIOUS SPACE ANGLES

PARK, SW; Na, Suck-Joo, IEEE TRANSACTIONS ON COMPONENTS, HYBRIDS, AND MANUFACTURING TECHNOLOGY, v.12, no.1, pp.105 - 108, 1989-03

3082
Curvature Corrections to Reynolds Stress Model for Computation of Turbulent Recirculating Flows

Sang Keun Dong; Chung, Myung Kyoon, AIAA JOURNAL, v.30, no.12, pp.2968 - 2970, 1992

3083
Curvature Dependent Two-Equation Model for Prediction of Two-Dimensional Turbulent Recirculating Flows

S.W.Park; Chung, Myung Kyoon, AIAA JOURNAL, v.27, no.3, pp.340 - 344, 1989

3084
Curvature Effect on Third-Order Velocity Correlations and Its Model Representation

S.W.Park; K.C.Kim; Chung, Myung Kyoon, PHYSICS OF FLUIDS, v.30, no.3, pp.626 - 628, 1987-03

3085
Curvature suppresses the Rayleigh-Taylor instability

Trinh, Philippe H.; Kim, Hyoungsoo; Hammoud, Naima; Howell, Peter D.; Chapman, S. Jonathan; Stone, Howard A., PHYSICS OF FLUIDS, v.26, no.5, 2014-05

3086
Curve interpolation with variable feedrate for surface requirement

Choi, IH; Yang, Min-Yang; Hong, WP; Jung, TS, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.25, no.3-4, pp.325 - 333, 2005-02

3087
Curve Veering in Outer-clamped Annular Plates Subject to Nonuniform In-plane Force

Lee, Chong-Won; Rim, K.H., 대한기계학회 영문 논문집, v.7, no.1, pp.70 - 75, 1993

3088
Curve Veering in the Eigenvalue Problem of Rotor-Bearing Systems

Jei, Yang-Gyu; Lee, Chong-Won, 대한기계학회 영문 논문집, v.4, no.2, pp.128 - 135, 1990

3089
Cusp 패턴 조정과 미소 볼엔드 밀링을 이용한 3차원 자유곡면의 다듬질

심충건; 양민양, 한국정밀공학회지, v.11, no.1, pp.177 - 183, 1994

3090
Customizable self-powered pressure sensor based on piezo-transmittance of tilted structures

Wu, Lei; Ahn, Junseong; Choi, Jungrak; Gu, Jimin; Li, Xuan; Gul, Osman; Zhao, Zhi-Jun; et al, NANO ENERGY, v.109, 2023-05

3091
Customizable, conformal, and stretchable 3D electronics via predistorted pattern generation and thermoforming

Choi, Jungrak; Han, Chankyu; Cho, Seokjoo; Kim, Kyuyoung; Ahn, Junseong; Del Orbe, Dionisio; Cho, Incheol; et al, SCIENCE ADVANCES, v.7, no.42, 2021-10

3092
Customization of head‐related transfer functions using principal components analysis in the time domain

Shin, Ki H.; Park, Youngjin, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.120, no.5, pp.3284 - 3284, 2006

3093
Customization of Spatially Continuous Head-Related Impulse Responses in the Median Plane

Hwang, S; Park, Youngjin; Park, Youn-sik, ACTA ACUSTICA UNITED WITH ACUSTICA, v.96, no.2, pp.351 - 363, 2010-03

3094
CUSUM-based GNSS Spoofing Detection Method for Users of GNSS Augmentation System

Jeong, Seongkyun; Kim, Minchan; Lee, Jiyun, INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, v.21, no.2, pp.513 - 523, 2020-06

3095
Cutting path generation of linear hotwire cutter for VLM-ST

Lee, SH; Ahn, DG; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.30, no.5-6, pp.401 - 415, 2006-09

3096
CWS액적의 증발 및 점화에 관한 실험적 연구

안국영; 백승욱; 김관태, 대한기계학회논문집 A, v.17, no.5, pp.1246 - 1252, 1993-01

3097
Cyclic fatigue crack growth and closure behaviour in alumina ceramics

Song, Ji Ho, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, v.21, no.12, pp.1575 - 1587, 1998

3098
Cyclic stability in NiTi and NiTiCu thin films: Role of precipitates in low- and high-cycle regimes

Ryu, Hyemin; Lee, Zhuo Feng; Kim, Ji-Young; Choi, Sunkun; Sim, Gi-Dong, Scripta Materialia, v.250, pp.116189, 2024-09

3099
DACS형 직격요격비행체의 비선형 가속도 조종루프 설계

이창훈; 김태훈; 전병을, 한국추진공학회지, v.19, no.3, pp.54 - 64, 2015-06

3100
Damage analysis of a type 3 cryogenic propellant tank after LN2 storage test

Kang, Sang-Guk; Kim, Myung-Gon; Park, Sang-Wuk; Kim, Chun-Gon; Kong, Cheol-Won, JOURNAL OF COMPOSITE MATERIALS, v.42, no.10, pp.975 - 992, 2008-05

rss_1.0 rss_2.0 atom_1.0