Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1981 to 2000 of 2170

1981
전해도금을 이용한 미세 피치 Au bump 제조 방법 및 접합에 관한 연구 = Fabrication and bonding of fine pitch Au bump by electroplatinglink

최준식; Choi, Joon-Sik; et al, 한국과학기술원, 2004

1982
정적압축및 반복압축응력이 알루미늄 단결정과 다결정의 creep 거동에 미치는 영향 = The effects of static and cyclic stress on the compressive creep behaviors in single and polycrystalline aluminumlink

이동헌; Lee, Dong-Hun; 유진; 남수우; et al, 한국과학기술원, 1987

1983
정전위하에서의 스테인리스강의 재부동태 속도에 관한 연구 = A study on the repassivation kinetics of stainless steels under potentiostatic conditionlink

김진관; Kim, Chin-Kwan; et al, 한국과학기술원, 1997

1984
졸-겔 $Pb_{1-X}La_XTi_{1-0.25X}O_3$ 용액의 분해 및 코팅 특성 = Decomposition and coating characteristics of Sol-gel $Pb_{1-X}La_XTi_{1-0.25X}O_3$ solutionslink

김성욱; Kim, Sung-Uk; et al, 한국과학기술원, 1996

1985
졸-겔 Germanim oxide 유리 박막의 제조 및 광특성 = Fabrication and opical characteristics of the sol-gel derived germanium oxide glass thin filmslink

장재혁; Jang, Jae-Hyeok; et al, 한국과학기술원, 1998

1986
졸-겔 스친코팅법을 이용한 $LiNbO_3$ 박막제조 및 특성 평가에 관한 연구 = Preparation and characterization of $LiNbO_3$ thin films using Sol-gel spin coating processlink

원동훈; Won, Dong-Hoon; et al, 한국과학기술원, 1993

1987
졸-겔 스핀코팅법을 이용한 PLZT 박막제조 및 특성평가에 관한 연구 = The preparation and characterization of PLZT thin films using Sol-gel spin coating processlink

김재명; Kim, Jae-Myung; et al, 한국과학기술원, 1993

1988
졸-겔 스핀코팅법을 이용한 PLZT 박막제조 및 페롭스카이트상의 생성에 관한 연구 = The preparation of PLZT thin films using sol-gel spin coating methods and the formation of perovskite phaseslink

안기철; Ahn, Ki-Cheol; 노광수; 김호기; et al, 한국과학기술원, 1992

1989
졸-겔 알루미나-실리카-에폭시 하이브리드 하드 코팅의 제조 = Fabrication of sol-gel alumina-silica-epoxy hybrid hard coatinglink

이태호; Lee, Tae-Ho; et al, 한국과학기술원, 2002

1990
졸-겔법과 Carbothermal reduction법을 이용한 단분산 구형 질화규소 분말의 제조 = Preparation of monosized spherical $Si_3N_4$ powder by sol-gel method and carbothermal reduction processlink

유한수; Yoo, Han-Su; et al, 한국과학기술원, 1993

1991
졸-겔법에 의한 Silicon abrasion resistant coating 제조에 있어서의 염기 촉매 효과 = Base CATALYST effect in the silicone abrasion resistant coating by sol-gel processlink

신범수; Shin, Beom-Soo; et al, 한국과학기술원, 1994

1992
졸-겔법으로 제조한 겔 분말로 부터 단분산 구형의 탄화규소, 질화규소, 그리고 탄화규소/질화규소 복합 분말의 제조 = Synthesis of monosized spherical SiC, $Si_3N_4$, and $SiC/Si_3N_4$ composite powders from Gel powders derived from Sol-Gel processlink

최재영; Choi, Jea-Young; et al, 한국과학기술원, 1994

1993
졸-겔법으로 제조한 배향성 $(Pb,La)TiO_3$ 박막의 광특성 = Optical characteristics of highly oriented $(Pb,La)TiO_3$ thin films prepared by sol-gel processlink

구준모; Koo, Jun-Mo; et al, 한국과학기술원, 1997

1994
졸-겔법을 이용하여 제조한 $Al_2O_3-ZrO_2$ 세라믹스의 분말특성 및 소결거동에 관한 연구 = Powder characteristics and sintering behavior of $Al_2O_3-ZrO_2$ ceramics prepared by sol gel processlink

우상국; Woo, Sang-Kuk; 김호기; 김종희; et al, 한국과학기술원, 1987

1995
주석-아연 무연 솔더 층을 이용한 실리콘 웨이퍼 접합에 관한 연구 = A study on the silicon wafer bonding using Sn-Zn Pb-free solder layerlink

정용; Jung, Yong; et al, 한국과학기술원, 2008

1996
주석-은-구리 합금 솔더 조성이 BGA 패키지의 낙하 충격 신뢰성에 미치는 영향 = Effects of Sn-Ag-Cu solder composition on drop test reliability of ball grid array(BGA) packagelink

박용성; Park, Yong-Sung; et al, 한국과학기술원, 2008

1997
중간화합물을 이용한 Bi-계 고온초전도체의 합성및 산소분압에 대한 안정성에 관한 연구 = Synthesis of Bi-oxide superconductors using intermediate compounds and their stabilities on oxygen partial pressurelink

이화성; Lee, Hwa-Sung; et al, 한국과학기술원, 1996

1998
중성의 NaCl 용액에서 가수분해 반응으로 부터 고속 수소생산을 위한 마그네슘 합금 제작 = Design of Mg alloys for fast hydrogen generation from hydrolysis in neutral NaCl solutionlink

오세권; Oh, Se-Kwon; et al, 한국과학기술원, 2012

1999
중탄소 크롬-몰리강의 내마모성에 대한 연구 = Studies on the abrasive wear resistance of the medium carbon Cr-Mo steellink

최수한; Choi, Soo-Han; et al, 한국과학기술원, 1976

2000
증기발생기 전열관용 인코넬 690합금의 동적변형시효 현상 = Dynamic strain aging of inconel 690 alloy for steam generator tubeslink

안영철; Ahn, Young-Cheol; et al, 한국과학기술원, 1999

rss_1.0 rss_2.0 atom_1.0