Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1921 to 1940 of 2223

1921
요동자석 스퍼터링 시스템에서의 타겟식각에 관한 연구 = Study on target erosion in rocking magnet sputtering systemlink

이도선; Lee, Do-Sun; et al, 한국과학기술원, 2004

1922
요오드화칼륨 용액을 사용한 후속공정에 의한 $Cu(In,Ga)Se_2$ 박막의 표면 특성과 광전압 특성 개선에 관한 연구 = Surface modification of $Cu(In,Ga)Se_2$ films by post-deposition treatment using KI liquid solution and its effects on the $Cu(In,Ga)Se_2$ solar cell performancelink

이정현; 안병태; et al, 한국과학기술원, 2019

1923
용사변수가 스테인리스강 플라즈마 용사층의 국부부식저항성 및 내마모성에 미치는 영향 = Effects of spray parameters on the resistance to localized corrosion and wear of stainless steel coats deposited by plasma spraylink

이상동; Lee, Sang-Dong; et al, 한국과학기술원, 1997

1924
용융 알루미늄의 방향성 산화에 의한 $Al_2O_3/Al$ 복합체 제조에 있어서 Mg의 역할에 관한 연구 = A study on the role of Mg in the formation of $Al_2O_3/Al$ composites by directional oxidation of molten aluminum alloylink

박홍규; Park, Hong-Kyu; et al, 한국과학기술원, 1992

1925
용융 주석의 자유표면 형상에 미치는 유도코일 형태의 영향 = Effect of inductor coil shape on the free surface shape of molten tinlink

하만진; Ha, Man-Jin; et al, 한국과학기술원, 1994

1926
용융 티타늄과 탄화붕소의 directional reaction 에 의한 $TiB_2$/TiC 복합체의 제조에 관한 연구 = A study on the fabrication of $TiB_2$/TiC composites by directional reaction of molten titanium with boron carbidelink

이승건; Lee, Seung-Kun; et al, 한국과학기술원, 1991

1927
용융납에서 순철과 탄소강에 Cr 을 확산피복시킬때의 kinetics = Kinetics of chromium diffusion coating onto irons and steels in molten lead bathlink

류근걸; Ryoo, Kun-Kul; 이재영; 김종희; et al, 한국과학기술원, 1978

1928
용접 구조용 Al-Zn-Mg 합금 용접부의 저주파 피로 특성에 관한 연구 = A study on the low-cycle fatigue behaviors for Al-Zn-Mg alloy weldmentslink

성완; Sung, Wan; et al, 한국과학기술원, 1987

1929
용접봉의 Zn 함량 변화에 따른 Al-Zn-Mg 합금의 용접성에 관한 연구 = A study on the weldability of Al-Zn-Mg alloy welded with filler alloys containing various Zn contentlink

여운성; Yeo, Wn-Seong; et al, 한국과학기술원, 1983

1930
우라늄 합금에서 소입냉각속도가 기계적 성질에 미치는 영향 = Effect of quenching rates on the mechanical properties in uranium alloylink

김영암; Kim, Young-Am; et al, 한국과학기술원, 1985

1931
우라늄-10wt% 몰리브텐 합금의 수소취성에 관한 연구 = A study on the hydrogen embrittlement in uranium-10wt% molybdenum alloylink

김찬중; Kim, Chan-Jung; et al, 한국과학기술원, 1986

1932
운모와 $CoSi_2/Si$ 기판들을 이용한 Si 전이막 성장연구 = Growth of transferable Si film using mica and $CoSi_2/Si$ substrateslink

박진우; Park, Jin-Woo; et al, 한국과학기술원, 2003

1933
원심분리 성형시 $α-Al_2O_3$ 첨가에 의한 Boehmite 의 소결 거동에 관한 연구 = A study on the sintering behavior of boehmite containing $α-Al_2O_3$ seed formed by centrifugal castinglink

박진우; Park, Jin-Woo; et al, 한국과학기술원, 1992

1934
원심분리법을 이용한 $SnO_2$ 가스센서의 미세구조 조절과 센서특성 = Microstructure control and sensor properties of $SnO_2$ gas sensors prepared by centrifugal coatinglink

이소라; Lee, So-Ra; 강석중; 윤덕용; et al, 한국과학기술원, 2002

1935
원자로 압력용기용 Ni-Mo-Cr계 저합금강의 합금원소 첨가량에 따른 미세조직 및 기계적 특성 평가 = Effects of alloying elements on the microstructure and mechanical properties of Ni-Mo-Cr low alloy steellink

박상규; Park, Sang-Gyu; et al, 한국과학기술원, 2008

1936
원자외선을 이용한 PPV precursor의 패턴 형성 = Pattern formation of PPV precursor by deep UVlink

윤제문; Youn, Jei-Moon; et al, 한국과학기술원, 1995

1937
원자층 단위 증착법으로 증착된 TiN 증착기구에 대한 모델 연구 = A study of the deposition model about ALD (atomic layer deposition) TiN methodlink

박진성; Park, Jin-Seong; et al, 한국과학기술원, 1999

1938
유기 슬폰화욕에서 80Sn-20Pb 합금의 도금 조건이 도금층의 형상 및 파괴 특성에 미치는 영향 = Effects of plating conditions on the morphorlogy and fracture characteristics of 80Sn-20Pb electrodeposits from organic sulfonate bathlink

김정한; Kim, Jeong-Han; et al, 한국과학기술원, 1994

1939
유기 슬폰화욕에서 전착된 Pb-Sn합금 도금층의 형상 및 파괴특성에 미치는 도금조건과 시효처리의영향 = Effects of plating condition and aging on the morphology and fracture characteristics of Pb-Sn electrodeposits from oraganic sulfonate bathlink

서민석; Suh, Min-Suk; et al, 한국과학기술원, 1995

1940
유기 이온의 층간 삽입을 통한 2차원 반자성 반도체의 자성 변화 유도 = Inducing magnetic change on two-dimensional antiferromagnetic semiconductor by organic ion intercalationlink

조서린; 강기범; et al, 한국과학기술원, 2021

rss_1.0 rss_2.0 atom_1.0