Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 2101 to 2120 of 2223

2101
초음파를 이용한 알루미늄 합금 및 폴리우레탄(TDI/PPG(1000)/MOCA)재료의 음향특성 측정 방법에 관한 연구 = A study on the measurement method of acoustic properties of Al alloy and Polyurethane(TDI/PPG(1000)/MOCA) using ultrasonic pulselink

김태식; Kim, Tae-Sik; et al, 한국과학기술원, 1998

2102
초저온 재료용 오스테나이트계 Fe-30Mn-5Al-0.3C-X 합금의 기계적 성질 = Mechanical properties of austenitic Fe-30Mn-5Al-0.3C-X alloys for cryogenic servicelink

한재광; Han, Jae-Kwang; et al, 한국과학기술원, 1983

2103
초저온용 Fe-30Mn-5Al-0.3C-0.1Nb 합금강의 저온인장성질에 미치는 Al 조성의 영향 및 용접성에 관한 연구 = A study on effect of aluminum content on low temperature tensile properties and weldability of cryogenic Fe-30Mn-5Al-0.3C-0.1Nb steellink

이은우; Lee, Eun-Woo; 임호빈; 김영길; et al, 한국과학기술원, 1986

2104
초전도체 $MgB_2$ 분말합성과 저압 치밀화 연구 = Powder synthesis and low-pressure sintering of $MgB_2$ superconductorlink

박제형; Park, Je-Hyeong; et al, 한국과학기술원, 2002

2105
출발 질화규소상 변화에 따른 Y-Si-Al-O-N계의 미세구조와 기계적 성질 = Microstructure and mechanical properties of sintered Y-Si-Al-O-N prepared from different crystalline phases of Si3N4 powderlink

이성민; Lee, Sung-Min; et al, 한국과학기술원, 1994

2106
친수성 고분자와 분해가 가능한 가교제를 통한 선택적 탈착이 가능한 접합 방법 개발 = Development of selectively detachable adhesion via Hydrophilic polymer and cleavable crosslinkerslink

윤영빈; Yoon, Young Bin; et al, 한국과학기술원, 2024

2107
카본페이스트 전극에서의 산화반응을 이용한 글루코스 센서의 제작 및 특성평가 = Fabrication and characterization of glucose sensor using oxidation reaction on the carbon paste electrodelink

김성완; Kim, Seong-Wan; et al, 한국과학기술원, 2011

2108
컨넥터용 Cu-2.5Ni-0.5Si-X 합금의 석출 특성과 기계적 정질에 미치는 합금원소 Mg와 P의 영향에 대한 연구 = A study on the effects of Mg and P additions on the precipitation characteristic and mechanical properties in Cu-2.5Ni-0.5Si-X alloys for connector applicationslink

서준원; Suh, Jun-Won; et al, 한국과학기술원, 1995

2109
코발트 계열 나노입자와 그래핀 에어로젤 복합체 제조 및 수소 발생 반응 촉매로의 응용에 관한 연구 = Cobalt based nanoparticles / reduced graphene oxide aerogel as hydrogen evolution electrocatalystlink

구성환; 김상욱; et al, 한국과학기술원, 2017

2110
코스퍼터링 $TiSi_2$ 박막의 상변태(C49→C54)와 응력해석 = Phase transformation (C49→C54) of $TiSi_2$ Co-Sputtered thin film and stress analysislink

김종환; Kim, Jong-Hwan; et al, 한국과학기술원, 1997

2111
크리프-피로 상호작용시 AISI 316스테인레스강에서 cavity 생성인자에 미치는 결정립도의 영향 = The effect of grain size on the cavity nucleation factor of AISI 316 stainless steel under creep-fatigue interactionlink

노범욱; Roh, Bum-Wook; et al, 한국과학기술원, 1996

2112
크립-피로 상호작용에 의한 AISI 316 스테인리스강의 손상기구와 수명예측에 관한 연구 = A study on the damage mechanism and life prediction in AISI 316 stainless steel under creep-fatigue interaction conditionlink

최백규; Choi, Baig-Gyu; et al, 한국과학기술원, 1994

2113
타이타늄 내에서의 수소 확산 = The diffusion of hydrogen in titaniumlink

이용태; Lee, Yong-Tai; et al, 한국과학기술원, 1976

2114
탄성 인쇄회로기판 기술을 위한 고분자에서의 전도성 액체금속 네트워크의 보편적 합성 = Universal synthesis of conductive liquid metal network in polymers enabling elastic printed circuit board technologylink

이원범, 한국과학기술원, 2022

2115
탄소 첨가에 따른 WC-12 % Fe-3%Ni 초경합금의 기계적 성질 변화 = Effect of carbon addition on the properties of WC-12 % Fe-3% Ni alloylink

김인응; Kim, In-Eung; et al, 한국과학기술원, 1981

2116
탄소가 3% 규소 강판의 2차 재결정에 미치는 영향 = Effects of carbon on the secondary recrystallization in 3 % silicon steellink

송재성; Song, Jae-Sung; 임호빈; 김영걸; et al, 한국과학기술원, 1982

2117
탄소가 첨가된 TiAl합금의 미세조직제어 = Microstructure control in carbon-doped TiAl alloyslink

김보현; Kim, Bo-Hyun; et al, 한국과학기술원, 1999

2118
탄소나노튜브 페이스트를 이용한 field emitter의 제작 및 구동 중 발생하는 탄소나노튜브의 구조적 변화에 대한 특성 고찰 = Characterization of preparation- and operation-induced structural defects of field emitter based on CNT pastelink

이연주; Lee, Yeon-Ju; et al, 한국과학기술원, 2007

2119
탄소나노튜브를 이용한 3차원 구조 전계방출에미터의 제조 및 특성 연구 = Fabrication and Characterization of 3D Structure Field Emitter using Carbon Nanotubelink

황재원; Hwang, Jae-Won; et al, 한국과학기술원, 2009

2120
탄소와 황이 W-Ni-Fe 중합금의 취성에 미치는 영향 = The embrittling effect of carbon and sulfur in W-Ni-Fe heavy alloylink

이영종; Lee, Yong-Jong; et al, 한국과학기술원, 1987

rss_1.0 rss_2.0 atom_1.0