The design variables of a membrane reactor, such as the permeation rate through the membrane and catalyst loading in the membrane, have received little attention in comparison with the operating conditions. A nondimensionalized model for a membrane reactor was developed to account for the effects of permeation rate and catalyst loading. The increased permeation rate did not always increase the exit conversion and there existed a maximum paint of exit conversion. At isothermal conditions, the exit conversion was saturated as catalyst loading was increased; however, when the reactor was under non-isothermal condition along the axial direction, there existed an optimum catalyst loading at which the exit conversion was maximum. With this model, the optimal configuration of permeation rate and catalyst loading could be determined.