1 | 100MWe 순산소 석탄연소 발전시스템의 개념설계–영동 프로젝트 최상민, 한국연소학회지, v.17, no.3, pp.30 - 45, 2012-09 |
2 | 1차원 기체-고체 반응기 모델의 로터리킬른 환원로 적용 한택진; 최상민, 한국연소학회 2012년도 추계학술대회, 한국연소학회, 2012-11 |
3 | 2MWe 순환 유동상 보일러의 부분부하 운전 성능 모사 김태현; 최상민, 한국연소학회 2012년도 춘계학술대회, 한국연소학회, 2013-04-13 |
4 | 2단 압력 폐열회수 증기 보일러에서 핀치 및 어프로치 온도가 증기터빈 출력에 미치는 영향 이수현; 최상민, 한국연소학회 2013년도 추계학술대회, 한국연소학회, 2013-12-16 |
5 | 2유체 분사기를 포트분사에 적용한 엔진 성능의 실험적 연구 강진석; 김승수; 최상민, 한국자동차공학회 춘계학술대회, pp.100 - 107, 한국자동차공학회, 1999 |
6 | 340MWe급 순환 유동상 보일러의 단순 성능 예측 모형 양종인; 최상민, 한국연소학회 2012년도 추계학술대회, 한국연소학회, 2012-11 |
7 | A study on quantitative observation and characterization of combustion processes of solid fuel particles entrained into hot gas flow = 고온 유동장 내 고체연료 입자 연소과정의 정량적 관측과 특성화 연구link Lee, Hoo Kyung; 이후경; et al, 한국과학기술원, 2015 |
8 | A study on the gas property variations of an iron ore sintering bed with flue gas recirculation = 제철 소결공정의 배가스 재순환 적용에 따른 가스 특성 변화에 관한 연구link Ahn, Hyung-Jun; 안형준; et al, 한국과학기술원, 2011 |
9 | (A) simplified model of coal gasifier : a simple kinetic model applied to process simulation = 석탄가스화기 단순화 모델링 : 공정해석에 활용 가능한 단순속도반응 기반 모델link Park, Jin-Hoo; 박진후; et al, 한국과학기술원, 2009 |
10 | (A) study on design optimization of stoker type municipal waste incinerator for low emission = 스토커식 도시 폐기물 소각 연소실의 저공해화를 위한 설계 최적화에 관한 연구link Shin, Dong-Hoon; 신동훈; et al, 한국과학기술원, 1998 |
11 | (A) study on the characteristics of direct contact condensation of a steam jet into a quenching tank through a single horizontal nozzle = 단일수평배관을 통해 응축탱크로 방출되는 증기제트의 직접접촉응축 특성에 대한 연구link Kim, Hwan-Yeol; 김환열; et al, 한국과학기술원, 2001 |
12 | (A) Study on the generation & degeneration of 3-dimensional data from / into 2-dimensional images - combustion diagnostic applications = 2차원 데이터의 3차원 재구성기법과 3차원 데이터의 2차원 영상화기법을 이용한 연소진단연구link Ha, Kwang-Soon; 하광순; et al, 한국과학기술원, 2000 |
13 | (A) study on the tomographic interpretation of axisymmetric diffusion flame emission = 단층 진단법을 이용한 축대칭 확산 화염 영상의 해석에 관한 연구link Ha, Kwang-Soon; 하광순; et al, 한국과학기술원, 1993 |
14 | (An) implementation of a numerical model for dynamics simulation in large boilers and its application = 중대형 보일러의 수치적 동특성 모사 모델 구현과 적용link Kim, Hyung-Rae; 김형래; et al, 한국과학기술원, 2005 |
15 | Bed Combustion in a Furnace Enclosure - A Model for the MSW Incinerator 유창국; 신동훈; 최상민, 한국연소학회지, v.7, no.1, pp.58 - 64, 2002-01 |
16 | CO2 포집을 고려한 가스터빈 복합화력 발전 플랜트의 대안 평가 제안 = Conceptual design of gas turbine combined cycle power plant with post-combustion CO2 capture : suggestion for alternative evaluationlink 이수현; Lee, Soo Hyeon; et al, 한국과학기술원, 2015 |
17 | Combustion modeling of the solid fuel bed and its application = 고체 연료층 연소 모델링 및 응용 연구link Yang, Won; 양원; et al, 한국과학기술원, 2004 |
18 | Devolatilization of solid waste particles and combustion of volatiles in a fluidized bed: modeling and experimental validation 최진환; 최상민, ENVIRONMENTAL ENGINEERING RESEARCH, v.9, no.4, pp.143 - 153, 2004-08 |
19 | Dynamic performance simulation of a USC-CFB boiler system = 초임계 순환 유동층 보일러 시스템의 동적 성능 모사link Kim, Seong-il; Song, Tae-Ho; 송태호; Choi, Sangmin; et al, 한국과학기술원, 2019 |
20 | Effect of CO2 gasification reaction on the oxy-combustion of pulverized coal char: Measurement of high temperature gasification rate and burnout simulation = 순산소 미분탄 촤 연소에 미치는 CO2 가스화 반응의 영향: 고온 가스화 반응율 측정과 Burnout 해석link Kim, Dae-Hee; 김대희; et al, 한국과학기술원, 2014 |
21 | Experimental investigation on the flow in the space between two Co-rotating disks in an axisymmetric enclosure by flow visualization and image processing = 유동의 가시화와 영상처리를 이용한 축 대칭 용기내에서 회전하는 두 원판 사이에서의 유동에 관한 실험적 연구link Kim, Jin-Soo; 김진수; et al, 한국과학기술원, 1991 |
22 | Fuel combustion and gas flow characteristics of the municipal solid waste incinerator = 도시 폐기물 소각로 연소실의 열유동 및 연소특성 연구link Ryu, Chang-Kook; 류창국; et al, 한국과학기술원, 2001 |
23 | Interpretation of single solid fuel particle combustion by visual observation = 시각적 관찰을 통한 고체 연료 입자의 연소 현상 해석link Yoo, Jae Young; Choi, Sangmin; et al, 한국과학기술원, 2017 |
24 | Modeling approach to packed bed process with solid particle reactions = 고체 입자 반응을 포함한 고정층 모델링 : 철광석 펠릿 소성 공정link Ahn, Hyungjun; 안형준; et al, 한국과학기술원, 2017 |
25 | Modeling for simple process analysis in a dry-feeding entrained bed coal gasifier = 건식 분류층 석탄 가스화기의 운전 조건에 따른 단순 공정 해석 모델link Lee, Hoo-Kyung; 이후경; et al, 한국과학기술원, 2010 |
26 | Numerical analysis of thermo-fluid flow and chemical species in the lower part of a blast furnace considering change of cohesive zone = 연화 융착대 형상변화에 따른 고로 하부에서의 열 유동 및 반응 특성에 관한 수치적 연구link Jin, Hong-Jong; 진홍종; et al, 한국과학기술원, 2009 |
27 | Numerical modeling of reaction and flow characteristics in a blast furnace with consideration of layered burden = 층상구조를 고려한 고로 내 열 유동 및 반응 특성에 관한 수치적 연구link Yang, Kwang-Heok; 양광혁; et al, 한국과학기술원, 2010 |
28 | Numerical Modelling of Temperature Distribution and Pressure Drop through the Layered Burden Loading in a Blast Furnace 양광혁; 정진경; 최상민, 한국연소학회지, v.14, no.4, pp.1 - 6, 2009-12 |
29 | PDTF를 이용한 석탄가스화 특성실험 신용승; 최상민; 안달홍, 에너지공학, v.8, no.4, pp.560 - 566, 1999-11 |
30 | Performance evaluation of an oxy-coal-fired power generation system : thermodynamic evaluation of power cycle = 순산소 석탄 연소 발전 시스템의 성능 평가 : 동력사이클의 열역학적 해석link Lee, Kwang-Jin; 이광진; et al, 한국과학기술원, 2010 |
31 | Performance evaluation with impurity effects as a part of conceptual design of oxy-coal combustion power generation system = 순산소 석탄 연소 발전시스템에서 불순물의 영향에 따른 시스템 성능 특성에 관한 연구link Kim, Sung-Eun; 김성은; et al, 한국과학기술원, 2010 |
32 | Performance improvement of an iron ore sintering bed through the enriched oxygen supply operation = 산소 부분 부화를 통한 제선 소결 베드 성능개선에 관한 연구link Kang, Hee-Jin; 강희진; et al, 한국과학기술원, 2011 |
33 | Pyrolysis and Overall Product Formation During the Early Stages of Combustion. 최상민, v.0, no.0, pp.0 - 0, 1986-12 |
34 | Revisiting volatile flame models for a single coal particle combustion = 석탄 입자의 탈휘발 화염 모형 개선link Niu, Xiaoyang; Choi, Sangmin; et al, 한국과학기술원, 2016 |
35 | SI 엔진 피스톤-링의 마찰모드 조성우; 최상민; 배충식, 한국자동차공학회 논문집, v.8, no.5, pp.114 - 120, 2000-09 |
36 | SI 엔진에서의 NOx 및 UHC 저감에 관한 연구 = A study on the reduction of NOx and UHC emission in SI engineslink 김창기; Kim, Chang-Gi; et al, 한국과학기술원, 1999 |
37 | SI엔진 배기가스 유동특성 및 가스농도변화 감지에 관한 연구 = A study on the exhaust gas flow characteristics and the detection of gas concentration variation in SI enginelink 정영교; Chung, Young-Kyo; et al, 한국과학기술원, 2000 |
38 | SI엔진 피스톤 결합체의 마찰력과 유막 두께 측정 조성우; 최상민; 배충식; 노석홍, 한국자동차공학회 1998년 춘계학술대회, v.98, pp.120 - 125, 한국자동차공학회, 1998-05 |
39 | SI엔진의 배기 유동 특성 : 순간적인 Gas 농도 관찰을 통한 실화 감지 = Characteristics of exhaust flow in a SI engine : misfire detection by measuring and calculating instantaneous gas concentration in exhaust manifoldlink 김형현; Kim, Hyung-Hyun; et al, 한국과학기술원, 1998 |
40 | Solidified crust formation and its effect on heat transfer between two separated horizontal liquid layers = 용융금속의 고화층 형성과 고화층이 분리된 두 수평 유체층 사이의 열전달에 미치는 영향link Park, Rae-Joon; 박래준; et al, 한국과학기술원, 1998 |
41 | System configuration studies on gas turbine combined cycle power plants - application to processes of high pressure heat recovery steam generator for carbon capture system = 가스터빈 복합화력 발전 플랜트의 시스템 구성 제안 - CO2 포집 대안 별 비교 평가link Kim, Seung-Jin; 김승진; et al, 한국과학기술원, 2013 |
42 | TRANSIENT INTERFACE SHAPE OF A 2-LAYER LIQUID IN AN ABRUPTLY ROTATING CYLINDER Lim, Tae Gyu; 최상민; Hyun, Jae Min, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, v.115, no.2, pp.324 - 329, 1993 |
43 | ULEV 대응엔진의 Wide Range O2 Sensor를 이용한 실화 감지기술 개발 정영교; 최상민; 배충식, 차세대자동차기술 워크숍, pp.8 - 13, 한국자동차부품연구원, 1998-09 |
44 | ULEV 대응엔진의 Wide Range O2 Sensor를 이용한 실화 감지의 실용화 기술 개발 정영교; 최상민; 배충식, 제8회 차세대 자동차기술 워크숍, pp.123 - 128, 2000-09 |
45 | VALIDATION OF NUMERICAL APPROACH FOR THE SEDIMENT OF MULTI-SIZE PARTICLES IN A FLUID CONTAINER 지영무; 최상민, 한국전산유체공학회지, v.18, no.2, pp.93 - 98, 2013-06 |
46 | 가솔린 직접분사식 4행정 엔진의 성능개선에 관한 연구 = A study on the development of gasoline direct injection 4-stroke enginelink 이용표; Lee, Yong-Pyo; et al, 한국과학기술원, 1999 |
47 | 가솔린 직접분사식 엔진용 고압선회식 분사기 노즐의 분무특성 파악 및 성능최적화 연구 = Spray characterization and performance optiminization of high pressure swirl injector nozzles for gasoline direct injection engineslink 장창수; Jang, Chang-Soo; et al, 한국과학기술원, 2000 |
48 | 가스 터빈 복합화력 발전 플랜트의 시스템 구성 제안 - CO2 포집 대안 별 비교 평가첨부파일 김승진; 최상민, 한국연소학회 2013년도 춘계학술대회, 한국연소학회, 2013-06-21 |
49 | 가스화 용융로 설계안의 열물질정산 해석 이민도; 최상민, 대한기계학회 추계학술대회 , pp.0 - 0, 대한기계학회, 2005-11 |
50 | 가스화 용융로의 설계 인자 분석 이민도; 최상민, 에너지공학회 춘계학술대회, pp.0 - 0, 한국에너지공학회, 2005-05 |
51 | 가스화 용융로의 설계인자 분석 = Design analysis of gasification melting furnaceslink 이민도; Lee, Min-Do; et al, 한국과학기술원, 2006 |
52 | 가스화 용융로의 설계인자 분석을 위한 비교 연구 김태현; 이민도; 최상민, 한국폐기물학회 발표논문집, pp.0 - 0, 한국폐기물학회, 2006-05 |
53 | 가스화 용융로의 운전성능 예측기법에 관한 연구 이민도; 최상민, 한국연소학회 추계학술대회, pp.0 - 0, 한국연소학회, 2005-10 |
54 | 가스화로의 확장을 위한 나무와 RDF의 열중량 분석 김태현; 이민도; 최상민, 한국폐기물학회 춘계학술대회, pp.0 - 0, 한국연소학회, 2006-10 |
55 | 가시복사 영상자료의 정량화와 그 활용에 관한 연구 = A study on the quantification of visible emission images and their applicationslink 이명재; Lee, Myong-Jai; et al, 한국과학기술원, 1993 |
56 | 가시화 엔진을 이용한 GDI분무의 관찰 이용표; 배충식; 최상민, 한국자동차공학회 1998년 춘계학술대회, v.98, pp.315 - 319, 한국자동차공학회, 1998-05 |
57 | 간헐식 2유체 분사기의 평균입경 예측 장창수; 김승수; 최상민, 한국자동차공학회 춘계학술대회, pp.73 - 78, 한국자동차공학회, 1999 |
58 | 고령자 환경 상황 단서 검출을 위한 딥러닝 기반 실내 환경 음향 인식 알고리즘 김성후; 남현욱; 최상민; 박용화, 제16회 한국로봇종합학술대회, 한국로봇학회, 2021-05-19 |
59 | 고로 공정의 해석 모델링 진홍종; 최상민, 한국연소학회 춘계 학술대회, pp.0 - 0, 한국연소학회, 2005-04 |
60 | 고로 내 융착대 형상 예측모델 양광혁; 최상민; 정진경, 대한기계학회 발표논문집, pp.0 - 0, 대한기계학회, 2006-06 |