1 | (A) dislocation theory of semi-brittle fracture = 반취성 파괴 이론link Chung, Soon-Kil; 정순길; et al, 한국과학기술원, 1981 |
2 | (A) finite element program on sound radiation of a two dimensional thin plate = 박판의 음압 복사에 관한 유한요소 프로그램의 개발link Kim, Woong-Tae; 김웅태; et al, 한국과학기술원, 1987 |
3 | (A) study on iodine stress corrosion cracking of zircaloy-4 tube = 질르칼로이-4 튜브의 요오드 응력부식파괴에 대한 연구link Moon, Kyung-Jin; 문경진; et al, 한국과학기술원, 1978 |
4 | (A) study on the radiation characteristics andacoustic performance of korean bells = 한국 범종의 음향학적 특성에 관한 연구link Yi, Sung-Il; 이성일; et al, 한국과학기술원, 1986 |
5 | (A) study on the sound pressure distribution in a duct with flow = 도관내에 공기의 흐름이 있을 경우, 관벽의 음원에 의한 음압 분포에 대한 연구link Lee, Soun-Young; 이순영; et al, 한국과학기술원, 1988 |
6 | (A) theoretical study on room acoustics = 실내 음향에 대한 이론적 연구link Kim, Jeung-Tae; 김정태; et al, 한국과학기술원, 1978 |
7 | (An) efficient image model algorithm for the prediction of room acoustics = 실내 음향특성의 예측을 위한 효율적 영상모델 알고리즘link Lee, Hee-Won; 이희원; et al, 한국과학기술원, 1988 |
8 | Dispersion radius of a magnus rotor = 회전하는 비행체의 분산 반경link Lee, Doug-Bong; 이덕봉; et al, 한국과학기술원, 1979 |
9 | Effect of coating layers on the pressure radiation patterns from an infinite two-layered plate = 무한 겁판에서의 음압 복사형태에 피복층이 미치는 영향link Lim, Byoung-Duk; 임병덕; et al, 한국과학기술원, 1979 |
10 | FFT 기법을 이용한 관내 음향 특성치 결정 = Determination of acoustic properties in an impedance tube by FFT techniquelink 박찬석; Park, Chan-Surk; et al, 한국과학기술원, 1989 |
11 | Helmholtz 분석방정식을 이용한 임의 형상 음원의 재현과 음장 예측 = Abitrarily-shaped sound source reconstruction and field prediction using the helmholtz integral equationlink 김규태; Kim, Gyu-Tae; 이종원; 이병호; et al, 한국과학기술원, 1989 |
12 | Performance analysis of reactive silencers withconsideration of the effects of higher order acoustic modes = 반사형 소음기에 있어서 고차 모드 음파의 영향을 고려한 성능 해석link Ih, Jeung-Guon; 이정권; et al, 한국과학기술원, 1985 |
13 | Performance evaluation for noise abatement of some muffler configurations = 소음기 배열 형상에 따른 소음감소 능력 평가link Lee, Jeong-Guon; 이정권; et al, 한국과학기술원, 1981 |
14 | Prediction of sound decay curves and speech intelligibility by using ray tracing technique = 레이 트레이싱 기법을 이용한 실내의 음향특성 추정link Kim, Yu-Man; 김유만; et al, 한국과학기술원, 1987 |
15 | Room air-conditioner 의 소음원 규명에 관한 연구 = Noise source identification for room air-conditionerslink 민형선; Minn, Hyoung-Sun; et al, 한국과학기술원, 1985 |
16 | SEA를 이용한 한 면이 탄성판인 직방형상자의 복사저항의 계산 = Simulation of the radiation resistancefor a parallel-piped box with a side of the elastic plate by using the SEA methodlink 임종윤; Lim, Jong-Yun; 엄윤용; 이병호; et al, 한국과학기술원, 1990 |
17 | Sound radiation from a circular plate having an elastic edge beam and a ring mass in fluid = 유체내에서의 환형 질량과 탄성 테두리 보를 가진 원판으로 부터의 음압 복사link Kim, Seok-Il; 김석일; et al, 한국과학기술원, 1983 |
18 | Sound transmission loss of double panels with sound absorptive facings and with internal corrugations of plastics = 흡음재를 표면에 부착시킨 이중격벽과 내부에 플라스틱 주름을 삽입한 이중격벽의 차음효과link Lee, Sung-Il; 이성일; et al, 한국과학기술원, 1980 |
19 | Transient sound tadiation from a clamped circular plate with viscoelastic coatings = 점성을 가진 물질이 입혀진 원형평판으로부터의 음압복사link Jeon, Jae-Jin; 전재진; et al, 한국과학기술원, 1987 |
20 | Vibration analysis of a blade-disk system using transfer matrix method = 전달매트릭스법을 이용한 익-원판계의 진동해석link Choi, Joong-Ok; 최중옥; Bark, Youn-Sik; Lee, Byung-Ho; et al, 한국과학기술원, 1989 |
21 | Vibration characteristics of rotating cylindrical shells = 회전하는 원통 쉘의 동적 특성link Kim, Hyun-Sil; 김현실; et al, 한국과학기술원, 1982 |
22 | XYZ 규약에서 오일러 각을 이용한 차량동역학해석 및 구속 상이치 안정화 계수 결정 = Vehicle dynamic analysis using euler angles in XYZ convention and determination of the coefficients for the constraint violation stabilization methodlink 김종규; Kim, Jong-Kyou; 이종원; 이병호; et al, 한국과학기술원, 1989 |
23 | 강성(剛性)을 가진 피아노 현(弦)의 질량 부착에 대한 효과 = Effects of mass attachment on stiff piano stringslink 황재혁; Hwang, Jae-Hyuk; et al, 한국과학기술원, 1982 |
24 | 경계요소법을 이용한 기타의 음장해석 = Analysis of a guitar acoustic field using the boundary element methodlink 김진원; Kim, Jin-Won; et al, 한국과학기술원, 1989 |
25 | 구와 무한원통에 대한 점음원의 산란현상에 대한 연구 = A study on the scattering of a point source by a sphere and an infinite cylinderlink 이준신; Lee, Jun-Sin; et al, 한국과학기술원, 1988 |
26 | 구형 열원을 갖는 Rijke 관에 관한 수치해석적 연구 = The numerical analysis of the rijke tube with spherical heat sourceslink 김성진; Kim, Sung-Jin; et al, 한국과학기술원, 1985 |
27 | 단순 래핑이 평치차의 진동 및 소음에 미치는 영향에 대한 실험적 연구 = The effect of simple lapping on the noise and vibration of spur gear gystems : an experimental approachlink 이동익; Lee, Dong-Ick; et al, 한국과학기술원, 1984 |
28 | 대공사격통제장치 = Anti-aircraft fire control computing systemlink 김종철; Kim, Jong-Chul; et al, 한국과학기술원, 1979 |
29 | 덕트 내에서 소음의 능동적 제어 = Active control of noise in a ductlink 김용국; Kim, Yong-Kook; 엄윤용; 이병호; et al, 한국과학기술원, 1990 |
30 | 마이크로 컴퓨터를 이용한 진동면 모우드형상의 자동 시각화에 관한 연구 = On-line visualization of mode shapes of vibrating surfaces using microcomputerlink 김규태; Kim, Gyu-Tae; et al, 한국과학기술원, 1985 |
31 | 마이크로 프로세서를 이용한 전자석 감쇄기의 제작 = Design and manufacture of a micro-processor aided electro-magnetic servo damperlink 이기영; Lee, Ki-Young; et al, 한국과학기술원, 1982 |
32 | 무한 평판에 탄성구의 충돌에 의한 음파 발생에 관한 연구 = Sound radiation from the impact of a sphere on an infinite elastic platelink 서병일; Suh, Byung-Iel; et al, 한국과학기술원, 1979 |
33 | 새로운 공구수명 방정식 : 공구끝 반경과 옆절삭각을 고려 = A new tool life equation : associated with nose radius and side cutting edge anglelink 이원백; Lee, Won-Back; et al, 한국과학기술원, 1979 |
34 | 선반 공구에 있어서 칩 유동방향의 예측 = Prediction of chip flow direction for a single-point lathe toollink 이병훈; Lee, Byung-Hoon; et al, 한국과학기술원, 1979 |
35 | 소음평가와 대책 = Noise evaluation and controllink 임문혁; Im, Moon-Hyuk; et al, 한국과학기술원, 1980 |
36 | 속도변환법을 이용한 탄성 다물체계의 동역학적 해석 = Dynamic analysis of flexible multibody systems using velocity transformation techniquelink 이병훈; Lee, Byung-Hoon; 곽병만; 이병호; et al, 한국과학기술원, 1992 |
37 | 승객중량의 영향을 고려한 승용차 현수장치의 최적 설계와 타당성 연구 = Optimization for the suspension system of a passenger car associated with the effect of passengers and study of validitylink 국금환; Kuk, Kum-Hoan; et al, 한국과학기술원, 1979 |
38 | 압전형 초음파 변환자의 제작 및 성능해석 = Fabrication and performance analysis of piezoelectric ultrasonic transducerslink 이종현; Lh, Jong-Hyun; et al, 한국과학기술원, 1986 |
39 | 연삭공정에 있어서 자려진동 해석 및 임펙트 뎀퍼의 효과에 관한 연구 = A study of self-excited vibratition and impact damper in grinding processlink 김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1983 |
40 | 연주자를 위한 스테이지 인크로우져의 최적 설계 = Optimal design of stage enclosure for performerslink 이희원; Lee, Hee-Won; et al, 한국과학기술원, 1981 |
41 | 열음향 진동에 관한 연구 = A study on the thermoaxoustic oscillationlink 권영필; Kwon, Young-Pil; et al, 한국과학기술원, 1986 |
42 | 용접 열원에 의한 온도 분포의 1차원 해석 모델의 연구 = One dimensional approach to determination of temperature distribution in butt-weldinglink 윤문우; Yoon, Moon-Woo; et al, 한국과학기술원, 1982 |
43 | 위험속도를 지나는 회전차의 진동특성 = The rotor passing through critical speedslink 이형국; Lee, Hyeong-Gook; et al, 한국과학기술원, 1983 |
44 | 유한요소법에 의한 재료비선형 구조물의 정적, 동적 해석 = Analysis of static and dynamic response of material nonlinear structures by finite element methodlink 최연선; Choi, Yeon-Sun; et al, 한국과학기술원, 1978 |
45 | 유한요소법을 사용한 보강된 풍차날개에 대한 응력해석 = Stress analysis of a reinforced windmill propeller using finite element methodlink 최동훈; Choi, Dong-Hoon; 이병호; 이정오; et al, 한국과학기술원, 1977 |
46 | 이중공명관의 형상을 갖는 소음기의 특성에 대한 연구 = An experimental study on the characteristics of the muffler with the configuration of a double resonatorlink 공문성; Kong, Moon-Seong; et al, 한국과학기술원, 1984 |
47 | 임피이던스를 가진 방음벽에 의한 반사 및 회절음장에 관한 연구 = A study on the reflected and diffracted sound field due to barriers with surface impedanceslink 임병덕; Lim, Byoung-Duk; et al, 한국과학기술원, 1987 |
48 | 절삭 작업에서의 채터 진동에 관한 연구 = A study on the chatter vibration in metal cuttinglink 김정석; Kim, Jeong-Suk; 송지호; 이병호; et al, 한국과학기술원, 1991 |
49 | 질량 및 흡음재가 부착된 판과 이중 평향막의 차음효과 = Effects of absorptive facings, mass- and rib- attachments and double paralleled membranes on sound transmission losslink 전오성; Jun, Oh-Sung; et al, 한국과학기술원, 1981 |
50 | 탄성원형 평판에 탄성구의 충돌로 인한 음압복사 = Sound radiation from the impact of a ball on elastic circular plateslink 김도중; Kim, Do-Joong; et al, 한국과학기술원, 1983 |
51 | 탄소강 (SM45C) 을 선삭할때 진 공구경 사각이 절삭기구에 미치는 영향 = The effect of true rake angle on cutting mechanism in machining medium carbon steel (SM45C)link 김정석; Kim, Jeong-Suck; et al, 한국과학기술원, 1979 |
52 | 평치차시스템의 진동에 관한 연구 = A study on the vibration of the spur gear systemlink 전재진; Jeon, Jae-Jin; et al, 한국과학기술원, 1984 |
53 | 피아노 향판 모델의 진동 해석 = Vibration analysis of a piano sound board modellink 이진교; Lee, Jin-Kyo; et al, 한국과학기술원, 1983 |
54 | 하이포이드 기어의 기하학적 해석과 설계 = Geometrical analysis and dimensional design of hypoid gearslink 한근조; Han, Geun-Jo; et al, 한국과학기술원, 1981 |
55 | 핵 연료봉의 안전을 위한 동력로의 출력 제한 = Limitations on the power of a nuclear reactor for the safety of fuel rodslink 황일순; Hwang, Il-Soon; et al, 한국과학기술원, 1977 |
56 | 膜張力이 있는 낮은 球形 쉘의 動特性 = Vibration of shallow spherical shells with uniform membrane stresseslink 이종현; Lee, Jong-Hyun; et al, 한국과학기술원, 1983 |