DSpace at KOASAS
Browsing DSpace

Browse "Dept. of Mechanical Engineering(기계공학과)" by Author Kwon, Hyuck-Cheol

A to Z

All 0-9

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

or enter first few letters:

Showing results 1 to 8 of 8

1
Effects of processing parameters on elastic deformation of the coil during the thin-strip coiling process

Park, Wonwoong; Kim, Dong Kyu; Im, Yong-Taek; Kwon, Hyuck-Cheol; Chun, Myung-Sik, METALS AND MATERIALS INTERNATIONAL, v.20, no.4, pp.719 - 726, 2014-07

2
Efficient hybrid evolutionary algorithm for optimization of a strip coiling process

Pholdee, Nantiwat; Park, Won-Woong; Kim, Dong-Kyu; Im, Yong-Taek; Bureerat, Sujin; Kwon, Hyuck-Cheol; Chun, Myung-Sik, ENGINEERING OPTIMIZATION, v.47, no.4, pp.521 - 532, 2015-04

3
Microstructure evolution modeling of square-diamond pass hot bar rolling of AISI 4135 steel

Lee, Ho-Won; Kwon, Hyuck-Cheol; Im, Yong-Taek; Hodgson, Peter D., COMPUTER METHODS IN MATERIALS SCIENCE, v.6, no.3, pp.140 - 149, 2006-04

4
Optimization of a Strip Coiling Process based on Evolutionary Algorithms

Pholdee, Nantiwat; Park, Won-Woong; Kim, Dong-Kyu; Im, Yong-Taek; Bureerat, Sujin; Kwon, Hyuck-Cheol; Chun, Myeong-Sig, Advances in Materials and Processing Technologies 2013, National Taiwan University of Science and Technology, 2013-09-23

5
Optimization of Flatness of Strip during Coiling Process based on Evolutionary Algorithms

Pholdee, Nantiwat; Bureerat, Sujin; Park, Won-Woong; Kim, Dong-Kyu; Im, Yong-Taek; Kwon, Hyuck-Cheol; Chun, Myung-Sik, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.7, pp.1493 - 1499, 2015-06

6
Process design for refinement and homogenization of austenite grain size in bar rolling using FE analysis = 오스테나이트 결정립 미세화와 균질화를 위한 유한요소해석을 이용한 선재압연 공정설계link

Kwon, Hyuck-Cheol; 권혁철; et al, 한국과학기술원, 2003

7
Surface wrinkle defect of carbon steel in the hot bar rolling process

Kwon, Hyuck-Cheol; Lee, Ho-Won; Kim, Hak-Young; Im, Yong-Taek; Park, Hae-Doo; Lee, Duk-Lak, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.209, no.9, pp.4476 - 4483, 2009-05

8
봉형상 압연공정의 롤 경로 및 롤 형상 설계용 설계보조시스템 개발에 대한 연구 = A study on development of a computer-aided-design system for roll pass and roll profile design in bar rollinglink

권혁철; Kwon, Hyuck-Cheol; et al, 한국과학기술원, 1998

Discover

rss_1.0 rss_2.0 atom_1.0