Surface wrinkle defect of carbon steel in the hot bar rolling process

Abstract

It is well known that surface defect is a common problem encountered in the multi-stage hot bar rolling process of carbon steel. In this study, the phenomenon was investigated by simulating the process by the finite element technique to identify the location where the surface defect might occur and checking the surface qualities obtained from the compression tests at various temperatures and strain rates to clarify the important parameter governing the possible surface defect formation. Also, the surface temperature was measured by employing pyrometer to support the experimental observation. The levels of temperature and specific deformation energy obtained from finite element simulations depending on the roll groove geometry were compared with the experimental observation to better understand the formation of the surface defect in the hot rolled bar. Based on this study, the surface defect might be formed by dissipating the excessive deformation energy accumulated by generating the new surface at the lower level of temperature where recrystallization cannot occur. According to this work, the comparison of the specific deformation energy level for determining the instability of the hot working process might be interesting for further investigation. (C) 2008 Elsevier B.V. All rights reserved.