1 | 2D/3D Hybrid process for the integration of micro-fluidic system 임태우; 손용; 양동열; 김동표; 이광섭; 박상후, 한국바이오칩학회 학술대회 , 한국바이오칩학회, 2007-10 |
2 | 2단계 절단과 두개의 적층 기준형상을 이용한 전자동 VLM-ST 공정 개발에 관한 연구 안동규; 이상호; 김효찬; 양동열; 박승교, 한국정밀공학회 2003년도 춘계학술대회, pp.62 - 65, 한국정밀공학회, 2003 |
3 | 2차원 강소성 유한요소해석에서의 안정성 및 효율성 향상에 관한 연구 박근; 양동열, 한국정밀공학회 추계학술대회 , pp.195 - 199, 한국정밀공학회, 1994 |
4 | 2차원 다단 단조공정의 금형해석 및 금형 설계를 위한 지원 시스템 개발 박철현; 이영규; 양동열; 강종훈; 김주현, 한국소성가공학회 1999년도 춘계학술대회 , pp.124 - 126, 한국소성가공학회, 1999 |
5 | 2차원 박판성형공정해석을 위한 강소성 외연적 유한 요소수식화 YANG DONG YOL, 한국정밀공학회 추계학술대회, pp.206 - 211, 1994-01-01 |
6 | 2차원 열간변형과 온도해석의 연계와 비연계 해석 비교 조종래; 박치용; 천명식; 윤정호; 양동열, 대한기계학회 추계학술대회, 대한기계학회, 1989-09-01 |
7 | 3 차원 나노 스테레오리소그래피의 정밀화를 위한 펨토초 레이저 출력-조사시간 제어방법 박상후; 임태우; 양동열, 한국정밀공학회 2004년 추계 학술대회 , pp.292 - 0, 한국정밀공학회, 2004-10-01 |
8 | 3-D Dynamic Explicit Finite Element Analysis for Sheet Forming by Using a General Contact Searching Algorithm and Different Shell Elements Li, G.; Yang, Dong-Yol; Zhon, Z., NUMISHEET `96, pp.421 - 426, 1996 |
9 | 3-D Finite Element Simulation of Complicated Hot Forging Processes Using a New Remeshing Scheme Based on Body-fitted Mapping Technique Yang, Dong-Yol; Cho, J.R.; Lee, N.K., Proc. 4rd ICTP, pp.1255 - 1260, 1993-01-01 |
10 | 3D EF Analysis for Industrial Hollow Section Extrusion of Multiply-connected Sections Using Mismatching Refinement with Domain Decomposition Yang, Dong-Yol; Park, K.; Lee, Y. K.; Lee, D. H., Proc. 6th Int. Conf. Technology of Plasticity , pp.1807 - 1812, 1999 |
11 | 3D FE simulation of the nuclear fuel rod considering the gap conductance between the pellet and cladding 강창학; 이성욱; 양동열; 김효찬; 양용식, 2013 추계 원자력 학회, 한국 원자력학회, 2013-10-24 |
12 | 3D nano/micro manufacturing processes employing two-photon stereolithography for a spatially integrated device Yang, Dong-Yol; Lim, T. W.; Son, Y.; Kong, H.J.; Lee, K.S.; Park, S. H., ASPEN, pp.486 - 491, 2007-01-01 |
13 | 3차원 강소성 유한요소법에 의한 T-형 단면 형상 환상 압연의 해석 양동열; 김광희, 대한기계학회 춘계학술대회, pp.279 - 282, 대한기계학회, 1991 |
14 | 3차원 강소성 유한요소해석을 사용한 전자 부품의 정밀단조공정 설계 박근; 강연식; 양동열, 한국정밀공학회 춘계 학술대회 , pp.932 - 936, 한국정밀공학회, 1997 |
15 | 3차원 곡면 플로팅 기법을 이용한 수술 후 유착방지막의 제작 박석희; 김효찬; 김택경; 양동열; 정현정; 박태관, 한국정밀공학회 2006년추계학술대회 , pp.129 - 130, 한국정밀공학회, 2006-10-01 |
16 | 3차원 곡면에 정밀인쇄를 위한 이미지 보정에 관한 연구 송민섭; 김효찬; 이상호; 양동열, 한국정밀공학회 춘계학대회, v.0, no.0, pp.379 - 379, 한국정밀공학회, 2005 |
17 | 3차원 마이크로 금속형상 제작을 위한 이광자 흡수 광환원 공정에 관한 연구 양동열; 손용; 임태우; 정유진; Prem, Prabhakaran; 이광섭, KMEMS 2009, 2009 |
18 | 3차원 매니폴드형 믹서를 가지는 마이크로 채널의 제작 및 평가 임태우; 손용; 정유진; 양동열; 공홍진; 이광섭; 박성준; et al, 한국정밀공학회 2009년 추계 학술대회, pp.607 - 608, 한국정밀공학회, 2009 |
19 | 3차원 변형을 고려한 사각형 블록의 업셋팅 해석 김종호; 양동열, 한국정밀기계학회 추계학술대회, pp.60 - 65, 한국정밀기계학회, 1984 |
20 | 3차원 변형을 고려한 정다각형 블록의 업셋팅 해석 김종호; 양동열, 대한기계학회 추계학술대회, pp.108 - 113, 대한기계학회, 1985 |
21 | 3차원 변형을 고려한 클로바 형상소재의 업셋팅 단조해석 김종호; 양동열, 대한기계학회 고체역학 부문 학술강연회, pp.11 - 15, 대한기계학회, 1986 |
22 | 3차원 압출 공정에서 다목적 최적화 기법을 이용한 금형 마모율의 최소화 YANG DONG YOL; 이석렬, 한국소성가공학회 2005년도 춘계학술대회 논문집, v.0, no.0, pp.0 - 0, 한국소성가공학회, 2005-05-01 |
23 | 3차원 압출 금형의 CAD/CAM 양동열, 국내외 한국 과학기술자 학술회의 춘계 WORKSHOP, pp.335 - 345, 1986 |
24 | 3차원 열간단조공정 해석에서 효과적인 플래시해석을 위한 육면체요소 격자압축법의 적용 홍진태; 이석렬; 양동열, 한국소성가공학회 추계학술대회제출, pp.237 - 240, 한국소성가공학회, 2002 |
25 | 3차원 유한요소법을 이용한 평치차 단조 금형의 해석 이낙규; 윤정호; 양동열, 대한기계학회 92년 춘추학술대회, pp.411 - 414, 대한기계학회, 1992 |
26 | 3차원 표면 컬러 인쇄를 위한 공정변수 영향성 분석에 관한 연구 송민섭; 이상호; 김효찬; 양동열, 한국정밀공학회 2004 추계 학술대회 , pp.103 - 0, 한국정밀공학회, 2004 |
27 | 3차원의 강-점소성 유한요소법을 이용한 터어빈 블레이드 해석 이낙규; 윤정호; 양동열, 대한기계학회 춘계학술대회, v.1, no.1, pp.252 - 255, 대한기계학회, 1990 |
28 | A Dynamic Explicit/Rigid-Plastic Finite Element Formulation and its Application to Auto-Body Panel Stamping Jung, D. W.; Lee, J. H.; Yang, Dong-Yol, NUMISHEET `96, pp.403 - 413, 1996 |
29 | A Mesh Refinement Sheme for Sheet Metal Forming Analysis Cho, J.W.; Yang, Dong-Yol, NUMISHEET'2002, pp.307 - 312, 2002 |
30 | A New All-Hexahedral Refinement Technique by Automatic Expansion of Thickness element layers Park, C.H.; Lee, Y.K.; Yang, Dong-Yol, Proceedings of the 7th International Conference on Technology of Plasticity , pp.835 - 840, 2002 |
31 | A New Automatic Mesh Generation Technique and its Application to the Finite Element Analysis of Practical Forging Process Yang, Dong-Yol; Lee,Y. K., Proc. 5th ICTP, pp.409 - 413, 1996 |
32 | A New Automatic Remeshing Technique for Finite Element Analysis of Metal Forming Process Lee, Y .K.; Lee, N. K; Yang, Dong-Yol, Proc. PCCE '93 , pp.441 - 446, 1993 |
33 | A New Preform Design Technique by Considering the Deformation Behavior of Material in Metal Forging Processes Hong, J.T.; Lee, S.R.; Park,C.H.; Yang, Dong-Yol, ICFG 2004 , pp.0 - 0, 2004 |
34 | A NEW REMESHING TECHNIQUE USING TETRAHEDRAL ELEMENTS BASED ON A POSTERIORI ERROR ESTIMATION AND ITS APPLICATION TO THE FINITE ELEMENT SIMULATION OF ME Yang, Dong-Yol; J. T. Hong; S. R. Lee, ICTP, v.0, no.0, pp.241 - 242, ICTP, 2005-10-01 |
35 | A Stress Integration Method Based Yang, Dong-Yol, , 1998-01-01 |
36 | A Study of the Effects on the Dynamic Explicit Analysis of Autobody Panel Stamping Processes by using the Faster Punch Velocity and the Mass Scaling S Yang, Dong-Yol; Jung, D.W., Advanced Technology of Plasticity 1999, pp.659 - 660, 1999 |
37 | A study on the material design of photosensitive paste for the barrier ribs by x-ray lithography 김동주; 류승민; 우창민; 박이순; 양동열, 한국고분자학회 2007년 학술대회 , v.32, no.2, 한국고분자학회, 2007-10-12 |
38 | A UBET approach for the analysis of profile ring rolling Lee, J.S.; Yang, Dong-Yol; Hahn, Y.H.; Kim, K.H.; Cho, N.C., Proc. 3rd ICPT, pp.317 - 321, 1990 |
39 | Additive and subtractive hybrid process using femtosecond laser Lim, TW; Son, Y; Yang, Dong-Yol, The 12th Korean MEMS Conference, Korean MEMS Conference, 2010-04-01 |
40 | ALE Description에 의한 축대칭 평금형압출의 유한요소해석 YANG DONG YOL, 한국정밀공학회 춘계학술대회, pp.175 - 179, 한국정밀공학회, 1994-01-01 |
41 | ALE 묘사에 근거한 강-점소성 유한요소 수식화와 축대칭 평금형압출에의 적용 강연식; 양동열, 한국소성가공학회 학술대회 , pp.175 - 179, 한국소성가공학회, 1994 |
42 | An Analysis of Springback with Bifurcation Behavior and Its Application to Die Design Kim, JB; Yoon, JW; Yang, Dong-Yol, Proceedings of the 9th international conference on technology of plasticity, 2008-09-11 |
43 | An analysis of wrinkling initiation and growth of anisotropic sheet in deep drawing process with controlled blank holding force Yang, Dong-Yol; Kim, J. B.; Yoon, J. W.; Barlat, F., NUMISHEET'99, 1999 |
44 | An Assessment of Numerical Parameters influencing Springback in Explicit Finite Element Analysis of Sheet Metal Forming Process Lee, S. W.; Yang, Dong-Yol, ICMF'98, 1998 |
45 | Analysis and Design of Flange Deformation in Deep Drawing of General Noncircular cups Yang, Dong-Yol; Jung, W.H.; Cha, Y.Y.; Kim,Y.J., Proceedings of 2nd Int. Conf. on Technology of Plasticity , pp.641 - 648, 1987-08-24 |
46 | Analysis and Design of Industrial Hot Extrusion Process through Square Dies for Manufacturing Yang, Dong-Yol; Kang, Y. S., Annals of the CIRP, v.45, pp.239 - 243, 1996 |
47 | Analysis and design of industrial hot extrusion process through square dies for manufacturing complicated Al alloy profiles Yang, Dong-Yol; Kang, Y. S., Annals CIRP, 1996 |
48 | Analysis and Design of Multi-blow Hammer Forging Process by the Explicit Dynamic Finite Element Method Yang, Dong-Yol; Yoo, Y. H., Annals of CIRP, 1997 |
49 | Analysis of deep-drawing of circular and square cups considering planar anisotropy Chung, W.J.; Yang, Dong-Yol; Kim, Y.J., Proc. 3rd ICPT, v.3, pp.1135 - 1142, 1990 |
50 | Analysis of Roll Torque in Profile Ring-Rolling of L-sections Yang, Dong-Yol; Ryoo, J.S.; Choi, J.C.; Johnson, W., Proc.21st Int. M.T.D.R. Conf. , pp.69 - 74, 1980-09-08 |
51 | Analysis of the manufacturing process of the metallic bipolar plate for molten carbonate fuel cell 이창환; 양동열; 이승륜; 강동우; 김윤성; 이태원, Fuelcell seminar 2011 , Fuelcell seminar, 2011-11-01 |
52 | Analytical and Experimental Investigation into Lubricated Three-Dimensional Extrusion of General Herical Sections Yang, Dong-Yol; Ham, I, v.35, no.1, pp.169 - 172, 1986 |
53 | Application of an Adaptive Grid Refinement Technique to Three-dimensional Finite Element Analysis of the Filling Stage in the Die-Casting Process Jeong, J. H.; Yang, Dong-Yol, AFDM '99, 1999 |
54 | Application of Finite Element Method to controlling Flatness In Sheet Metal Forming Kim, S. K,; Lee, J. J,; Seo, J. Y,; Lee,Y. K.; Yang, Dong-Yol, ASME Int. Mech. Eng. Congress and Exposition, 1995 |
55 | Application of Recurrent Boundary Condition to Finite Element Analysis of Three-Dimensional Forming with Twisted Shapes Yang, Dong-Yol; Park, Y. B., Proc. 5th ICTP, pp.415 - 418, 1996 |
56 | Application to Controlling Flatness in Sheet Metal Forming Yang, Dong-Yol, ASME Int. Mech. Eng., 1995 |
57 | Autofocusing method for precise nanofabrication using two-photon photopolymerization Jung B.J.; Kong H.J.; Son Y.; Yang, Dong-Yol, CLEO/Pacific Rim 2009 - 8th Pacific Rim Conference on Lasers and Electro-Optics, 2009-08-30 |
58 | Automatic Generation of Mesh with Surface Element Layers and Cope Mesh for Finite Element Simulation of Metal Forming Processes Yang, Dong-Yol; Lee, Y. K., NUMIFORM'98, 1998 |
59 | Automatic Mesh Generation and Remeshing for Finite Element Analysis of 3D Bulk Forming Processes Yang, Dong-Yol; Lee,Y.K., Advanced Technology of Plasticity 1999, pp.521 - 532, 1999 |
60 | Barrier ribs for plasma display panel by UV-assisted roll forming process Ryu S.M.; Kim D.J.; Yang, Dong-Yol; Park L.S., 14th International Display Workshops, IDW 2007, pp.819 - 822, 2007-12-05 |