DC Field | Value | Language |
---|---|---|
dc.contributor.author | Shim, DS | ko |
dc.contributor.author | Yang, Dong-Yol | ko |
dc.contributor.author | Kim, KH | ko |
dc.contributor.author | Chung, SW | ko |
dc.contributor.author | Han, MS | ko |
dc.date.accessioned | 2013-03-11T17:28:03Z | - |
dc.date.available | 2013-03-11T17:28:03Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2010-02 | - |
dc.identifier.citation | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.50, no.2, pp.214 - 218 | - |
dc.identifier.issn | 0890-6955 | - |
dc.identifier.uri | http://hdl.handle.net/10203/99732 | - |
dc.description.abstract | The line array roll set (LARS) process [7] proposed by the authors is an effective metal forming process used to manufacture doubly curved metal plates. To obtain a final shape with the desired bend radii and to minimize any possible defects, the process for forming the desired shape should be systematically and accurately designed. The major purpose of the present work is to analyze the effect of the forming sequences in the LARS process. The experiments are conducted using three types of forming sequences, and the final bend radii and the quality of the formed plates produced by the LARS process are evaluated. It is found that it is more effective to form a doubly curved plate through a singly curved shape in order to improve the quality of the formed plate. A series of forming experiments with various bending radii are conducted and the interaction phenomena in double curvature bending are observed. (C) 2009 Elsevier Ltd. All rights reserved. | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.title | Investigation into forming sequences for the incremental forming of doubly curved plates using the line array roll set (LARS) process | - |
dc.type | Article | - |
dc.identifier.wosid | 000273920800008 | - |
dc.identifier.scopusid | 2-s2.0-73049103353 | - |
dc.type.rims | ART | - |
dc.citation.volume | 50 | - |
dc.citation.issue | 2 | - |
dc.citation.beginningpage | 214 | - |
dc.citation.endingpage | 218 | - |
dc.citation.publicationname | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | - |
dc.identifier.doi | 10.1016/j.ijmachtools.2009.11.009 | - |
dc.contributor.localauthor | Yang, Dong-Yol | - |
dc.contributor.nonIdAuthor | Kim, KH | - |
dc.contributor.nonIdAuthor | Chung, SW | - |
dc.contributor.nonIdAuthor | Han, MS | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | Incremental forming | - |
dc.subject.keywordAuthor | Sheet metal | - |
dc.subject.keywordAuthor | Bending | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.