Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 2401 to 2420 of 3969

2401
서비스/엔터테인먼트 로봇을 위한 문장 기반 비트 제스처 자동생성 시스템 = A dialog-based beat gesture generation system for service/entertainment robotslink

김재우; Kim, Jae-Woo; et al, 한국과학기술원, 2013

2402
서어보 댐퍼에 의한 단순 진동 계의 진동 제어 = Vibration suppression of a simplified vibratory system using servo-damperlink

황요하; Hwang, Yo-Ha; et al, 한국과학기술원, 1982

2403
서어보형 가속도계의 Digital PWM 제어 = Digital pulse width modulation (PWM) control of servo type accelerometerlink

김정한; Kim, Jung-Han; et al, 한국과학기술원, 1995

2404
선박 블록의 이동 및 반전 시뮬레이션 프로그램 개발 = A CAD-based software for simulation of lifting and turnover of ship blocklink

이수범; Lee, Soo-Beom; et al, 한국과학기술원, 2000

2405
선박 소조립 공정용 로봇 자동 교시 시스템의 구현 = Implementation of automatic teaching system for subassembly process in shipbuildinglink

김정호; Kim, Jung-Ho; et al, 한국과학기술원, 1996

2406
선박 진동의 계측 시스템 개발 및 실선 적용에 관한 연구 = Study on development and application of vibration measurement system for shipslink

김노성; Kim, Nho-Seong; et al, 한국과학기술원, 1995

2407
선박용 배관의 AUTO-ROUTING을 위한 설계전문가시스템 = Design expert system for auto-routing of ship hull pipeslink

강상섭; Kang, Sang-Seob; et al, 한국과학기술원, 1996

2408
선박용 에폭시 도료의 열물성 및 표면처리가 방청효과에 미치는 영향 = Effects of thermo-mechanical property and surface treatment on the anti-corrosion property of the marine epoxy paintlink

김병철; Kim, Byung-Chul; et al, 한국과학기술원, 2005

2409
선반 공구에 있어서 칩 유동방향의 예측 = Prediction of chip flow direction for a single-point lathe toollink

이병훈; Lee, Byung-Hoon; et al, 한국과학기술원, 1979

2410
선반작업시 일정 절삭력 유지를 위한 구속 적응제어의 응용에 관한 연구 = A study on the application of adaptive control constraint to maintain constant cutting force in turninglink

김인수; Kim, In-Soo; et al, 한국과학기술원, 1986

2411
선별 구동이 가능한 압전 충격형 선형 구동기 = Piezotype impact linear actuator with multiple inertia masses for selective motionlink

박영호; Park, Young-Ho; et al, 한국과학기술원, 2010

2412
선삭 가공에서의 칩 및 채터 감지에 관한 연구 = A study on chip and chatter monitoring in turning processlink

이석원; Lee, Seok-Won; et al, 한국과학기술원, 1993

2413
선삭가공용 자동 프로그래밍 시스템의 개발에 관한 연구 = A study on the development of automatic programming system for turninglink

이성찬; Lee, Sung-Chan; et al, 한국과학기술원, 1993

2414
선삭작업에서의 절삭과정 모델링과 비례-적분 적응 제어기의 적용에 관한 연구 = Modeling of cutting process and adaptive PI control in turninglink

안태길; Ahn, Tae-Kil; et al, 한국과학기술원, 1987

2415
선재 압연 공정의 표면결함 저감을 위한 공정설계 기술 = Process planning for reduction of surface defect formation in bar rollinglink

김학영; Kim, Hak-Young; et al, 한국과학기술원, 2005

2416
선정된 자유도에서 측정된 주파수 응답 함수를 이용한 유한 요소 모형 개선 = FE model tuning using the measured FRFs at selected DOFslink

김성일; Kim, Sung-Il; et al, 한국과학기술원, 1998

2417
선체대조립공정을 위한 용접이동로봇시스템의 경로계획과 제어에 관한 연구 = A study on path planning and control of welding mobile manipulator for assembly process in shipbuildinglink

김진덕; Kim, Jin-Deok; et al, 한국과학기술원, 1999

2418
선택저장 자료구조를 이용한 복합다양체 모델의 불리언 작업 = Boolean operation of non-manifold model with the data structure of selective storagelink

유병현; Yoo, Byoung-Hyun; et al, 한국과학기술원, 1999

2419
선택적 membrane/shell 요소를 이용한 2차원 스트레칭 공정의 탄소성 유한요소해석 = Elastic-plastic finite element analysis of 2-D stretch forming by using the selective membrane/shell elementslink

정상보; Jung, Sang-Bo; et al, 한국과학기술원, 1991

2420
선택적 내부 전착이 가능한 마이크로/나노 복합 리튬-금속 배터리 음극구조에 대한 연구 = Structurally tailored hierarchical anode surface for selective inward lithium growth in lithium-metal batterylink

양인영; 김산하; et al, 한국과학기술원, 2021

rss_1.0 rss_2.0 atom_1.0