Showing results 1 to 60 of 240
A correction to optimum alloy composition for design of high-temperature high-strength Al-Ti-V-Zr alloys through thermodynamic calculations Park, SI; Han, SZ; Lee, Zin-Hyoung; Lee, HyuckMo, SCRIPTA MATERIALIA, v.37, no.1, pp.93 - 97, 1997 |
A first principles investigation of new cathode materials for advanced lithium batteries Jeon, Young-Ah; Kim, Sung-Kwan; Kim, Yang-Soo; Won, Dae-Hee; Kim, Byung-Il; No, Kwangsoo, JOURNAL OF ELECTROCERAMICS, v.17, no.2-4, pp.667 - 671, 2006-12 |
A novel insight into Au-Au thermosonic flip chip joint under extreme thermal cycles: Defect characterization and failure analysis Liu, Jinhong; Hua, Yaling; Liu, Junfu; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, SURFACES AND INTERFACES, v.44, 2024-01 |
A Perovskite-Type Lanthanum Cobaltite Thin Film Synthesized via an Electrochemical Route and Its Application in SOFC Interconnects Park, Beom Kyeong; Song, Rak-Hyun; Lee, Seung-Bok; Lim, Tak-Hyoung; Park, Seok-Joo; Park, Chong-Ook; Lee, Jong-Won, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.162, no.14, pp.F1549 - F1554, 2015 |
A study of the dynamic recrystallization kinetics of V-microalloyed medium carbon steel Kim, Kwanwook; Park, Joong-Keun, JOURNAL OF MATERIALS SCIENCE, v.50, no.18, pp.6142 - 6153, 2015-09 |
A study on intergranular corrosion of laser treated alloy 600 by DL-EPR method and microscopic examination Lim, YS; Kim, HP; Kim, JS; Kwon, Hyuk-Sang, FRACTURE AND STRENGTH OF SOLIDS, PTS 1 AND 2, v.183-1, pp.595 - 600, 2000 |
A study on thermal cycling (T/C) reliability of anisotropic conductive film (ACF) flip chip assembly for thin chip-on-board (COB) packages Jang, Kyung-Woon; Park, Jin-Hyoung; Lee, Soon-Bok; Paik, Kyung-Wook, MICROELECTRONICS RELIABILITY, v.52, no.6, pp.1174 - 1181, 2012-06 |
A thermodynamic study of phase equilibria in the Sn-Bi-Pb solder system Yoon, SW; Lee, HyuckMo, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, v.22, no.2, pp.167 - 178, 1998 |
Abnormal grain growth and intergranular amorphous film formation in BaTiO3 Choi, Si-Young; Kang, Suk-Joong L; Chung, Sung-Yoon, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.90, pp.645 - 648, 2007-02 |
Abnormal grain growth enhanced densification of liquid phase-sintered WC-Co in support of the pore filling theory Yang, Dong-Yeol; Yoon, Duk Yong; Kang, Suk-Joong L., JOURNAL OF MATERIALS SCIENCE, v.47, no.20, pp.7056 - 7063, 2012-10 |
Additive manufacturing of titanium-base alloys with equiaxed microstructures using powder blends Choi, Gwanghyo; Choi, Won Seok; Han, Jeongho; Choi, Pyuck-Pa, ADDITIVE MANUFACTURING, v.36, pp.101467, 2020-12 |
Advanced Cu/Polymer Hybrid Bonding System for Fine-Pitch 3D Stacking Devices Park, Juseong; Kang, Sukkyung; Kim, Myeong Eun; Kim, Nam Jun; Kim, Jungkyun; Kim, Sanha; Kim, Kyung Min, ADVANCED MATERIALS TECHNOLOGIES, v.8, no.20, 2023-10 |
ALLOY DESIGN AND COARSENING PHENOMENON OF L1(2) PRECIPITATES IN HIGH-TEMPERATURE AL-2 AT PCT (TI,V,ZR) SYSTEMS HAN, SZ; CHUNG, SC; Lee, HyuckMo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.26, no.7, pp.1633 - 1639, 1995-07 |
Alloy design of intermetallic dispersion strengthened aluminum systems by mechanical alloying for high temperature applications Park, SI; Lee, Hyuck Mo, METALS AND MATERIALS, v.6, no.1, pp.17 - 24, 2000-02 |
An Al plus Y coating process for improvement of the high-temperature oxidation resistance of a TiAl alloy Jung, HG; Wee, Dang-Moon; Oh, MH; Kim, KY, OXIDATION OF METALS, v.55, no.3-4, pp.189 - 208, 2001-04 |
An Aqueous Sodium Ion Hybrid Battery Incorporating an Organic Compound and a Prussian Blue Derivative Kim, Dong Jun; Jung, YoungHwa; Bharathi, K. Kamala; Je, Sang Hyun; Kim, Do Kyung; Coskun, Ali; Choi, Jang Wook, ADVANCED ENERGY MATERIALS, v.4, no.12, 2014-08 |
Analysis of phase transformation kinetics by intrinsic stress evolutions during the isothermal aging of amorphous Ni(P) and Sn/Ni(P) films Song, JY; Yu, Jin; Lee, TY, JOURNAL OF MATERIALS RESEARCH, v.19, no.4, pp.1257 - 1264, 2004-04 |
Atom probe tomography observation of hydrogen in high-Mn steel and silver charged via an electrolytic route Haley, D.; Merzlikin, S. V.; Choi, Pyuck-Pa; Raabe, D., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.39, no.23, pp.12221 - 12229, 2014-08 |
Atomic arrangements of (Ga(1-x)Mn(x))N nanorods grown on Al(2)O(3) substrates Lee, Kyu Hyung; Lee, JeongYong; Jung, J. H.; Kim, T. W.; Jeon, H. C.; Kang, T. W., APPLIED PHYSICS LETTERS, v.92, no.14, 2008-04 |
B4C tile 삽입 B4Cp/Al7075 하이브리드 복합재의 계면 제어를 통한 내충격 특성의 향상 Park, Jongbok; Lee, Taegyu; Lee, Donghyun; Cho, Seungchan; Lee, Sang-Kwan; Hong, Soon Hyung; Ryu, Ho Jin, COMPOSITES RESEARCH, v.33, no.5, pp.235 - 240, 2020-10 |
Bio-inspired mineralization of CO2 gas to hollow CaCO3 microspheres and bone hydroxyapatite/polymer composites Kim, Sungjin; Ko, Jong Wan; Park, Chan Beum, JOURNAL OF MATERIALS CHEMISTRY, v.21, no.30, pp.11070 - 11073, 2011 |
Biocompatibility study of multi-layered hydroxyapatite coatings synthesized on Ti-6Al-4V alloys by RF magnetron sputtering for prosthetic-orthopaedic implant applications Hamdi, Dunya Abdulsahib; Jiang, Zhong-Tao; No, Kwangsoo; Rahman, M. Mahbubur; Lee, Ping-Chin; Linh Nguyen Thi Truc; Kim, Jaegyu; et al, APPLIED SURFACE SCIENCE, v.463, pp.292 - 299, 2019-01 |
Boron nitride nanoplatelets as reinforcement material for dental ceramics Lee, Bin; Kwon, Jae-Sung; Khalid, Muhammad Waqas; Kim, Kwang-Mahn; Kim, Joonhui; Lim, Kyoung Mook; Hong, Soon Hyung, DENTAL MATERIALS, v.36, no.6, pp.744 - 754, 2020-06 |
Boundary faceting-dependent densification in a BaTiO3 model system Lee, Min-Gon; Chung, Sung-Yoon; Kang, Suk-Joong L., ACTA MATERIALIA, v.59, no.2, pp.692 - 698, 2011-01 |
Carbothermic synthesis of monodispersed spherical Si3N4/SiC nanocomposite powder Choi, JY; Kim, CH; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.82, no.10, pp.2665 - 2671, 1999-10 |
Catalytic activity improvement of Ni3Al foils for methanol decomposition by oxidation-reduction pretreatment Jang, Jun Hyuk; Xu, Ya; Demura, Masahiko; Wee, Dang-Moon; Hirano, Toshiyuki, APPLIED CATALYSIS A-GENERAL, v.398, no.1-2, pp.161 - 167, 2011-05 |
Characteristics of polyvinylpyrrolidone-layered silicate nanocomposites prepared by attrition ball milling Koo, CM; Ham, HT; Choi, MH; Kim, Sang Ouk; Chung, In Jae, POLYMER, v.44, no.3, pp.681 - 689, 2003-02 |
COARSENING PHENOMENON OF L1(2) PRECIPITATES IN RAPIDLY SOLIDIFIED AL-3AT-PERCENT(TI,V,ZR) SYSTEM CHUNG, SC; HAN, SZ; Lee, HyuckMo; KWON, HS, SCRIPTA METALLURGICA ET MATERIALIA, v.33, no.5, pp.687 - 693, 1995-09 |
Cobalt Nanoparticle Arrays made by Templated Solid-State Dewetting Oh, Yong-Jun; Ross, Caroline A.; Jung, Yeon Sik; Wang, Yang; Thompson, Carl V., SMALL, v.5, no.7, pp.860 - 865, 2009-04 |
Coherency strain enhanced dielectric-temperature property of rare-earth doped BaTiO3 Jeon, Sang-Chae; Kang, Suk-Joong L., APPLIED PHYSICS LETTERS, v.102, no.11, pp.12915, 2013-03 |
Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets Cha, Jaemin; Kim, Joon Hui; Ryu, Seongwoo; Hong, Soon Hyung, COMPOSITES PART B-ENGINEERING, v.162, pp.283 - 288, 2019-04 |
Conformation-dependent thermoelectric power factor of multilayer nanocomposites Byun, You-young; Jang, Junho; Culebras, Mario; Bae, Byeong-Soo; Cho, Jung Sang; Park, Yong Tae; Cho, Chungyeon, APPLIED SURFACE SCIENCE, v.594, 2022-08 |
Contact damage and strength degradation in brittle/quasi-plastic silicon nitride bilayers Lee, KS; Lee, SK; Lawn, BR; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.81, no.9, pp.2394 - 2404, 1998-09 |
Contact Problems of IrOX Anodes in Polymer Electrolyte Membrane Water Electrolysis Doo, Gisu; Park, Juseong; Park, Jeesoo; Heo, Jiyun; Jung, Jinkwan; Lee, Dong Wook; Bae, Hanmin; et al, ACS ENERGY LETTERS, v.8, no.5, pp.2214 - 2220, 2023-04 |
Control of boundary structure and grain growth for microstructural design Choi, SY; Kang, Suk-Joong L, PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 Book Series: MATERIALS SCIENCE FORUM, v.475-479, pp.1 - 5, 2005 |
Controlling the Morphology of Side Chain Liquid Crystalline Block Copolymer Thin Films through Variations in Liquid Crystalline Content Verploegen, Eric; Zhang, Tejia; Jung, Yeon Sik; Ross, Caroline; Hammond, Paula T., NANO LETTERS, v.8, no.10, pp.3434 - 3440, 2008-10 |
Controlling the size of Pt nanoparticles with a cationic surfactant, C(n)TABr Seo, Jongsu; Lee, Siwon; Koo, Bonjae; Jung, Woochul, CRYSTENGCOMM, v.20, no.14, pp.2010 - 2015, 2018-04 |
Corrosion Characteristic of Pulsed Electrodeposition Nanocrystalline Ni-Co Alloy Coating Zang Xinliang; Zhao Xiqing; Park, Joong Keun; Gao Yukui; Yang Qingxiang, RARE METAL MATERIALS AND ENGINEERING, v.38, no.6, pp.1057 - 1061, 2009-06 |
Corrosion resistance of weight reduced AlxCrFeMoV high entropy alloys Raza, Ahmad; Abdulahad, Syed; Kang, Byungchul; Ryu, Ho Jin; Hong, Soon Hyung, APPLIED SURFACE SCIENCE, v.485, pp.368 - 374, 2019-08 |
Corrosion studies of Fe3Al-Fe3AlC intermetallics in 0.25 n H2SO4 using microelectrochemical method and SAES analysis Rao, V. Shankar; Kwon, Hyuk-Sang, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.154, no.5, pp.255 - 260, 2007 |
Corrosion-resistant coating for cathode current collector and wet-seal area of molten carbonate fuel cells Kim, MinJoong; Youn, Ju-Young; Lim, JeongHoon; Eom, Kwang-Sup; Cho, Eun Ae; Kwon, Hyuk-Sang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.43, no.24, pp.11363 - 11371, 2018-06 |
Creep deformation of Sn-3.5Ag-xCu and Sn-3.5Ag-xBi solder joints Shin, SW; Yu, Jin, JOURNAL OF ELECTRONIC MATERIALS, v.34, no.2, pp.188 - 195, 2005-02 |
Critical grain size for abnormal grain growth of BaTiO3 in air Yang, Dong-Yeol; Choi, Si-Young; Kang, Suk-Joong L, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, v.114, pp.970 - 973, 2006-11 |
CRYSTALLIZATION OF COPPER METAPHOSPHATE GLASS Bae, Byeong-Soo; WEINBERG, MC, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.76, no.6, pp.1395 - 1400, 1993-06 |
Crystallization, phase evolution and corrosion of Fe-based metallic glasses: An atomic-scale structural and chemical characterization study Duarte, M. J.; Kostka, A.; Jimenez, J. A.; Choi, Pyuck-Pa; Klemm, J.; Crespo, D.; Raabe, D.; et al, ACTA MATERIALIA, v.71, pp.20 - 30, 2014-06 |
Crystallographic Orientation Relationships Among eta-Ni3Ti Precipitate, Reverted Austenite and Martensitic Matrix in Fe-10Cr-10Ni-2W Maraging Alloy Suk, Jin I; Hong, Soon-Hyung; Nam, Soo Woo, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.24, no.12, pp.2643 - 2652, 1993-12 |
CYCLIC PLASTIC STRAIN-ENERGY AS A DAMAGE CRITERION AND ENVIRONMENTAL-EFFECT IN NB-BEARING HIGH-STRENGTH, LOW-ALLOY STEEL CHUNG, YW; Lee, Won-Jong, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.186, no.1-2, pp.121 - 128, 1994-10 |
Defect-Engineered Electroforming-Free Analog HfOx Memristor and Its Application to the Neural Network Kim, Gil Seop; Song, Hanchan; Lee, Yoon Kyeung; Kim, Ji Hun; Kim, Woohyun; Park, Tae Hyung; Kim, Hae Jin; et al, ACS APPLIED MATERIALS & INTERFACES, v.11, no.50, pp.47063 - 47072, 2019-12 |
Deposition of NiAl coating for improvement of oxidation resistance of cold-rolled Ni3Al foils Kim, SH; Oh, MH; Kishida, K; Hirano, T; Wee, Dang-Moon, INTERMETALLICS, v.13, no.2, pp.129 - 136, 2005-02 |
Development of high Mn-N duplex stainless steel for automobile structural components Toor, Ihsan-ul-Haq; Hyun, Park Jung; Kwon, Hyuk-Sang, CORROSION SCIENCE, v.50, pp.404 - 410, 2008-02 |
Diffuse dielectric anomaly in perovskite-type ferroelectric oxides in the temperature range of 400-700 degrees C Kang, BS; Choi, Si-Kyung; Park, CH, JOURNAL OF APPLIED PHYSICS, v.94, no.3, pp.1904 - 1911, 2003-08 |
Diffusion-Controlled Solid-State Formation of CoSb Phase from Co/Sb-Multilayered Nanowires Jeon, Seong-Gi; Shin, Ho-Sun; Yu, Jin; Song, Jae-Yong, JOURNAL OF NANOMATERIALS, 2012 |
Directional solidification and creep deformation of a Ti-46Al-1.5Mo-0.2C (at.%) alloy Lee, HN; Johnson, DR; Inui, H; Oh, MH; Wee, Dang-Moon; Yamaguchi, M, INTERMETALLICS, v.10, no.9, pp.841 - 850, 2002-09 |
Dislocation structures of low-angle boundaries in Nb-doped SrTiO3 bicrystals Choi, SY; Buban, JP; Nishi, M; Kageyama, H; Shibata, N; Yamamoto, T; Kang, Suk-Joong L; et al, JOURNAL OF MATERIALS SCIENCE, v.41, no.9, pp.2621 - 2625, 2006-05 |
Double loop electrochemical potentiokinetic reactivation test of nickel-base alloy 600 surface-melted by a CO2 laser beam Lim, YS; Kim, HP; Kim, JS; Kwon, Hyuk-Sang, METALS AND MATERIALS-KOREA, v.7, no.1, pp.61 - 65, 2001-02 |
Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy Chung, Hyun; Choi, Won Seok; Jun, Hosun; Do, Hyeon-Seok; Lee, Byeong-Joo; Choi, Pyuck-Pa; Han, Heung Nam; et al, NATURE COMMUNICATIONS, v.14, no.1, 2023-01 |
Dry thermal oxidation of a graded SiGe layer Lim, YS; Jeong, JS; Lee, JeongYong; Kim, HS; Shon, HK; Kim, HK; Moon, DW, APPLIED PHYSICS LETTERS, v.79, no.22, pp.3606 - 3608, 2001-11 |
Effect of 1 at.% nitrogen addition on the creep resistance of two phase TiAl alloy Cho, HS; Nam, SW; Yun, JH; Wee, Dang-Moon, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.262, no.1-2, pp.129 - 136, 1999-04 |
Effect of Al2O3 dopant on abnormal grain growth in BaTiO3 Fisher, Grant; Lee, BK; Brancquart, A; Choi, SY; Kang, Suk-Joong L, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.25, no.12, pp.2033 - 2036, 2005 |
Effect of alloyed Ti:Zr ratio on phase stability of Al66Mn9(Ti,Zr)(25) intermetallic compounds Han, SZ; Rho, BS; Lee, HyuckMo; Choi, Si-Kyung, INTERMETALLICS, v.4, no.3, pp.245 - 249, 1996-04 |
Discover