DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim W.-S. | ko |
dc.contributor.author | Lee, Jungju | ko |
dc.date.accessioned | 2013-03-08T07:13:28Z | - |
dc.date.available | 2013-03-08T07:13:28Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2008 | - |
dc.identifier.citation | ADVANCED MATERIALS RESEARCH, v.33-37, no.0, pp.327 - 332 | - |
dc.identifier.issn | 1022-6680 | - |
dc.identifier.uri | http://hdl.handle.net/10203/92440 | - |
dc.description.abstract | The failure in an adhesive-bonded structure starts at the interface, and the interfacial fracture is of interest whenever adhesion between different materials is concerned. One of primary factors limiting the application of adhesive-bonded joints to structural design is the lack of a good evaluation tool for adhesion strength to predict the load-bearing capacity of boned joints. The adhesion strength of composite/steel bonding has been evaluated using interfacial fracture mechanics characterization. The energy release rate of a composite/steel interfacial crack was compared with the fracture toughness of the interface, which was measured from bi-material end notched flexure (ENF) specimens, to predict the failure loads of bi-material lap joints. Fracture toughness, GIIc, was regarded as a property of the interface rather than a property of the adhesive. The results show that interfacial fracture mechanics characterization of adhesion strength can be a practical engineering tool for predicting the load-bearing capacities of adhesive-bonded joints. | - |
dc.language | English | - |
dc.publisher | Trans Tech Publications | - |
dc.title | Interfacial fracture analysis of adhesive-bonded joints | - |
dc.type | Article | - |
dc.identifier.scopusid | 2-s2.0-45749105140 | - |
dc.type.rims | ART | - |
dc.citation.volume | 33-37 | - |
dc.citation.issue | 0 | - |
dc.citation.beginningpage | 327 | - |
dc.citation.endingpage | 332 | - |
dc.citation.publicationname | ADVANCED MATERIALS RESEARCH | - |
dc.contributor.localauthor | Lee, Jungju | - |
dc.contributor.nonIdAuthor | Kim W.-S. | - |
dc.subject.keywordAuthor | Adhesive-bonding | - |
dc.subject.keywordAuthor | Fracture toughness | - |
dc.subject.keywordAuthor | Interfacial strength | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.