DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, S | ko |
dc.contributor.author | Yang, Min-Yang | ko |
dc.date.accessioned | 2013-03-08T04:32:27Z | - |
dc.date.available | 2013-03-08T04:32:27Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2005-09 | - |
dc.identifier.citation | COMPUTER-AIDED DESIGN, v.37, no.10, pp.999 - 1014 | - |
dc.identifier.issn | 0010-4485 | - |
dc.identifier.uri | http://hdl.handle.net/10203/92162 | - |
dc.description.abstract | In 3-axis NC (Numerical Control) machining, various cutters are used and the offset compensation for these cutters is important for a gouge free tool path generation. This paper introduces triangular mesh offset method for a generalized cutter defined based on the APT (Automatically Programmed Tools) definition or parametric curve. An offset vector is computed according to the geometry of a cutter and the normal vector of a part surface. A triangular mesh is offset to the CL (Cutter Location) surface by multiple normal vectors of a vertex and the offset vector computation method. A tool path for a generalized cutter is generated on the CL surface, and the machining test shows that the proposed offset method is useful for the NC machining. © 2004 Elsevier Ltd. All rights reserved. | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.subject | TOOL-PATH GENERATION | - |
dc.subject | SCULPTURED SURFACES | - |
dc.title | Triangular mesh offset for generalized cutter | - |
dc.type | Article | - |
dc.identifier.wosid | 000228947400003 | - |
dc.identifier.scopusid | 2-s2.0-16644370581 | - |
dc.type.rims | ART | - |
dc.citation.volume | 37 | - |
dc.citation.issue | 10 | - |
dc.citation.beginningpage | 999 | - |
dc.citation.endingpage | 1014 | - |
dc.citation.publicationname | COMPUTER-AIDED DESIGN | - |
dc.identifier.doi | 10.1016/j.cad.2004.10.002 | - |
dc.contributor.localauthor | Yang, Min-Yang | - |
dc.contributor.nonIdAuthor | Kim, S | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | offset | - |
dc.subject.keywordAuthor | APT cutter | - |
dc.subject.keywordAuthor | parabolic cutter | - |
dc.subject.keywordAuthor | triangular mesh | - |
dc.subject.keywordAuthor | CL surface | - |
dc.subject.keywordAuthor | tool path | - |
dc.subject.keywordAuthor | NC machining | - |
dc.subject.keywordPlus | TOOL-PATH GENERATION | - |
dc.subject.keywordPlus | SCULPTURED SURFACES | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.