DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김효찬 | ko |
dc.contributor.author | 이상호 | ko |
dc.contributor.author | 양동열 | ko |
dc.contributor.author | 박승교 | ko |
dc.date.accessioned | 2013-03-06T19:46:53Z | - |
dc.date.available | 2013-03-06T19:46:53Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2006-07 | - |
dc.identifier.citation | 한국정밀공학회지, v.23, no.7, pp.177 - 186 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | http://hdl.handle.net/10203/88214 | - |
dc.description.abstract | In order to realize a three-dimensional shape on CAD, the machining process has been widely used because it offers practical advantages such as precision and versatility. However, the traditional machining process needs a large amount of time in cutting a product and the remained material causes trouble such as inconvenience due to cleaning process. Therefore, a new rapid manufacturing process, Rapid Heat Ablation process (RHA) using the hot tool, has been developed. In this paper, the hot tool for RHA process is designed to minimize radius of heat affected zone. TRIZ well-known as creative problem solving method is applied to overcome the contradictive requirements of the hot tool. For the detailed design of the hot tool, numerical model is established with several assumptions. In order to verify the numerical results, surface temperature of the hot tool is measured with K-type thermocouple at the predetermined location. Numerical and experimental results show that the devised hot tool fulfils its requirements. The practicality and effectiveness of the designed hot tool have been verified through experiments. | - |
dc.language | Korean | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 쾌속 열용삭 공정에서 열반경 최소화를 위한 열 공구 설계에 관한 연구 | - |
dc.title.alternative | A Study of Design for Hot Tool to Minimize Radius of Heat Affected Zone in Rapid Heat Ablation Process | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 23 | - |
dc.citation.issue | 7 | - |
dc.citation.beginningpage | 177 | - |
dc.citation.endingpage | 186 | - |
dc.citation.publicationname | 한국정밀공학회지 | - |
dc.identifier.kciid | ART001098806 | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 김효찬 | - |
dc.contributor.nonIdAuthor | 이상호 | - |
dc.contributor.nonIdAuthor | 박승교 | - |
dc.subject.keywordAuthor | Rapid Manufacturing System(쾌속생산시스템) | - |
dc.subject.keywordAuthor | Rapid Heat Ablation Process(쾌속열용삭공정) | - |
dc.subject.keywordAuthor | Hot Tool design(열공구설계) | - |
dc.subject.keywordAuthor | TRIZ(트리즈) | - |
dc.subject.keywordAuthor | Rapid Manufacturing System(쾌속생산시스템) | - |
dc.subject.keywordAuthor | Rapid Heat Ablation Process(쾌속열용삭공정) | - |
dc.subject.keywordAuthor | Hot Tool design(열공구설계) | - |
dc.subject.keywordAuthor | TRIZ(트리즈) | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.