DC Field | Value | Language |
---|---|---|
dc.contributor.author | 하기주 | ko |
dc.contributor.author | 김진근 | ko |
dc.contributor.author | 김정수 | ko |
dc.contributor.author | 김희신 | ko |
dc.contributor.author | 김윤용 | ko |
dc.date.accessioned | 2013-03-06T19:04:26Z | - |
dc.date.available | 2013-03-06T19:04:26Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2005-10 | - |
dc.identifier.citation | 콘크리트학회 논문집, v.17, no.5, pp.709 - 716 | - |
dc.identifier.issn | 1229-5515 | - |
dc.identifier.uri | http://hdl.handle.net/10203/88067 | - |
dc.description.abstract | 이 연구는 국내에서 상용 중인 재료를 이용하여 고인성 섬유복합 모르타르를 개발하고자 함에 목적이 있으며, 고인성 섬유복합 모르타르를 개발하기 위해서는 모르타르 매트릭스의 파괴역학(fracture mechanics)적 특성과 섬유-모르타르 경계면의 마이크로역학(micromechanics)적 특성을 파악하여야 한다. 특히 시멘트계 재료(cementitious materials)의 역학적 특성에 가장 큰 영향을 미치는 물-시멘트비(water cement ratio)에 대한 연구에 초점을 맞추었으며, 3가지의 물-시멘트비에 대하여 섬유의 인발실험(fiber pullout test)과 모르타르의 쐐기쪼갬실험(wedge splitting test)을 수행하였고 이를 통하여 모르타르 매트릭스와 섬유-매트릭스 경계면(interface)의 역학적인 특성을 파악하였다. 이러한 연구에 의하여 결정된 섬유-매트릭스 경계면의 마이크로역학적 특성과 모르타르의 역학적 특성을 이용하여 물-시멘트비 범위 및 재료의 기본 배합을 제시하였고 또한 마이크로역학과 안정상태 균열이론(steady-state cracking theory)을 배경으로 하여 1축인장 하에서 인장변형률 경화거동을 나타내는 고인성 섬유복합 모르타르를 개발하였다. 개발된 재료는 1축인장 하에서 변형률 경화거동을 나타내었으며, 변형능력은 최대 2.2% 이었다. 이와 같은 높은 변형 능력은 일반 콘크리트(또는 모르타르)의 약 100배에 해당된다. 또한 압축하에서는 압축강도 이후 응력-변형률 곡선이 완만하게 감소하는 연성파괴의 형태를 나타내었으며 28일의 압축강도는 보통강도 콘크리트의 강도에 해당되는 26MPa, 34 MPa인 것으로 측정되었다. | - |
dc.language | Korean | - |
dc.publisher | 한국콘크리트학회 | - |
dc.title | 마이크로역학에 의하여 설계된 ECC (Engineered Cementitious Composite)의 역학적 특성 | - |
dc.title.alternative | Mechanical Properties of an ECC (Engineered Cementitious Composite) Designed Based on Micromechanical Principle | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 17 | - |
dc.citation.issue | 5 | - |
dc.citation.beginningpage | 709 | - |
dc.citation.endingpage | 716 | - |
dc.citation.publicationname | 콘크리트학회 논문집 | - |
dc.identifier.kciid | ART001122873 | - |
dc.contributor.localauthor | 김진근 | - |
dc.contributor.nonIdAuthor | 하기주 | - |
dc.contributor.nonIdAuthor | 김정수 | - |
dc.contributor.nonIdAuthor | 김희신 | - |
dc.contributor.nonIdAuthor | 김윤용 | - |
dc.subject.keywordAuthor | ECC | - |
dc.subject.keywordAuthor | strain-hardening behavior | - |
dc.subject.keywordAuthor | fiber pullout | - |
dc.subject.keywordAuthor | fracture toughness | - |
dc.subject.keywordAuthor | micromechanics | - |
dc.subject.keywordAuthor | 섬유복합 모르타르 | - |
dc.subject.keywordAuthor | 변형률 경화거동 | - |
dc.subject.keywordAuthor | 섬유인발실험 | - |
dc.subject.keywordAuthor | 쐐기쪼갬시험 | - |
dc.subject.keywordAuthor | 마이크로역학 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.