DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Hyun-Chul | ko |
dc.contributor.author | Yoo, Young-Ik | ko |
dc.contributor.author | Lee, Jungju | ko |
dc.date.accessioned | 2013-03-06T17:06:06Z | - |
dc.date.available | 2013-03-06T17:06:06Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2008-12 | - |
dc.identifier.citation | SENSORS AND ACTUATORS A-PHYSICAL, v.148, no.2, pp.437 - 442 | - |
dc.identifier.issn | 0924-4247 | - |
dc.identifier.uri | http://hdl.handle.net/10203/87714 | - |
dc.description.abstract | NiTi can produce a large force per unit volume and operate with a simple mechanism. For these reasons, it has been widely researched for application as an actuator In this study, preliminary research to develop a NiTi linear actuator using a two-way shape memory process is conducted. Compression tests on a NiTi cylinder to investigate basic compressive properties are performed and recovery stresses to evaluate the actuating capacity are measured. The one-way shape memory process requires compressive loading and unloading but the two-way recovery does not, Hence. a two-way recovery can be utilized more conveniently compared to a one-way process. Additionally, bolt-fracturing tests are performed to confirm the possibility of NiTi actuators. The bolts are fractured Successfully using both one-way and two-way shape memory effects. (c) 2008 Elsevier B.V. All rights reserved. | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCIENCE SA | - |
dc.subject | PLASTIC STRAINS | - |
dc.subject | ALLOYS | - |
dc.subject | ASYMMETRY | - |
dc.subject | BEHAVIOR | - |
dc.subject | TENSION | - |
dc.title | Development of a NiTi actuator using a two-way shape memory effect induced by compressive loading cycles | - |
dc.type | Article | - |
dc.identifier.wosid | 000261817000012 | - |
dc.identifier.scopusid | 2-s2.0-56549093149 | - |
dc.type.rims | ART | - |
dc.citation.volume | 148 | - |
dc.citation.issue | 2 | - |
dc.citation.beginningpage | 437 | - |
dc.citation.endingpage | 442 | - |
dc.citation.publicationname | SENSORS AND ACTUATORS A-PHYSICAL | - |
dc.identifier.doi | 10.1016/j.sna.2008.08.019 | - |
dc.contributor.localauthor | Lee, Jungju | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | NiTi | - |
dc.subject.keywordAuthor | Two-way shape memory effect | - |
dc.subject.keywordAuthor | Compressive loading cycles | - |
dc.subject.keywordAuthor | Linear actuator | - |
dc.subject.keywordPlus | PLASTIC STRAINS | - |
dc.subject.keywordPlus | ALLOYS | - |
dc.subject.keywordPlus | ASYMMETRY | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | TENSION | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.