DC Field | Value | Language |
---|---|---|
dc.contributor.author | Jang, SH | ko |
dc.contributor.author | Ih, Jeong-Guon | ko |
dc.date.accessioned | 2013-03-05T00:25:55Z | - |
dc.date.available | 2013-03-05T00:25:55Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2003-02 | - |
dc.identifier.citation | JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.113, no.2, pp.726 - 734 | - |
dc.identifier.issn | 0001-4966 | - |
dc.identifier.uri | http://hdl.handle.net/10203/84876 | - |
dc.description.abstract | It is known that the direct method yields different results from the indirect (or load) method in measuring the in-duct acoustic source parameters of fluid machines. The load method usually comes up with a negative source resistance, although a fairly accurate prediction of radiated noise can be obtained from any method. This study is focused on the effect of the time-varying nature of fluid machines on the output results of two typical measurement methods. For this purpose, a simplified fluid machine consisting of a reservoir, a valve, and an exhaust pipe is considered as representing a typical periodic, time-varying system and the measurement situations are simulated by using the method of characteristics. The equivalent circuits for such simulations are also analyzed by considering the system as having a linear time-varying source. It is found that the results from the load method are quite sensitive to the change of cylinder pressure or valve profile, in contrast to those from the direct. method. In the. load method, the source admittance turns out to be predominantly dependent on the valve admittance at the calculation frequency as well as the valve and load admittances at other frequencies. In the direct method, however, the source resistance is always positive and the source admittance depends mainly upon the zeroth order of valve admittance. (C) 2003 Acoustical Society of America. | - |
dc.language | English | - |
dc.publisher | ACOUSTICAL SOC AMER AMER INST PHYSICS | - |
dc.title | Numerical investigation and electro-acoustic modeling of measurement methods for the in-duct acoustical source parameters | - |
dc.type | Article | - |
dc.identifier.wosid | 000180874900005 | - |
dc.identifier.scopusid | 2-s2.0-0037329411 | - |
dc.type.rims | ART | - |
dc.citation.volume | 113 | - |
dc.citation.issue | 2 | - |
dc.citation.beginningpage | 726 | - |
dc.citation.endingpage | 734 | - |
dc.citation.publicationname | JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA | - |
dc.identifier.doi | 10.1121/1.1504850 | - |
dc.contributor.localauthor | Ih, Jeong-Guon | - |
dc.contributor.nonIdAuthor | Jang, SH | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordPlus | INTERNAL-COMBUSTION ENGINE | - |
dc.subject.keywordPlus | SOURCE IMPEDANCE | - |
dc.subject.keywordPlus | EXHAUST SYSTEM | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.