DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박진호 | ko |
dc.contributor.author | 남성호 | ko |
dc.contributor.author | 권신 | ko |
dc.contributor.author | 양민양 | ko |
dc.date.accessioned | 2013-03-04T23:48:14Z | - |
dc.date.available | 2013-03-04T23:48:14Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2004-08 | - |
dc.identifier.citation | 한국정밀공학회지, v.21, no.8, pp.136 - 142 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | http://hdl.handle.net/10203/84708 | - |
dc.description.abstract | This paper deals with the design and implementation of an open architecture CNC system for Wire-EDM, with a consideration of the difference between Wire-EDM and NC cutting machines. Recent open architecture controller(OAC) related research results could be applied to directly access Wire-EDM systems at the CNC level. However, previous research about OAC is mostly aimed at NC cutting machines such as milling or lathes, and hence these results are inadequate to apply to Wire-EDM. To close the gap between previous general research on OAC and Wire-EDM specific needs, an open architecture NC model for Wire-EDM composed of a synchronization kernel and a NC functional module is proposed. Based on the control information flow and Wire-EDM specific machining process, the conceptual CNC model and the detailed implementation model for Wire-EDM is suggested. | - |
dc.language | Korean | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | WEDM을 위한 개방형 제어시스템의 구조에 관한 연구 | - |
dc.title.alternative | A Study on the Open Architecture CNC System for WEDM | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 21 | - |
dc.citation.issue | 8 | - |
dc.citation.beginningpage | 136 | - |
dc.citation.endingpage | 142 | - |
dc.citation.publicationname | 한국정밀공학회지 | - |
dc.identifier.kciid | ART001098658 | - |
dc.contributor.localauthor | 양민양 | - |
dc.contributor.nonIdAuthor | 박진호 | - |
dc.contributor.nonIdAuthor | 남성호 | - |
dc.contributor.nonIdAuthor | 권신 | - |
dc.subject.keywordAuthor | Wire-EDM(와이어 방전가공기) | - |
dc.subject.keywordAuthor | CNC(수치제어장치) | - |
dc.subject.keywordAuthor | Open architecture controller(개방형 제어기) | - |
dc.subject.keywordAuthor | PC-NC | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.