DC Field | Value | Language |
---|---|---|
dc.contributor.author | 강태구 | ko |
dc.contributor.author | 조영호 | ko |
dc.date.accessioned | 2013-03-04T22:21:43Z | - |
dc.date.available | 2013-03-04T22:21:43Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2002-06 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.26, no.6, pp.1187 - 1193 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/84398 | - |
dc.description.abstract | Anodic bonding process has been quantitatively evaluated based on the Taguchi analysis of the interfacial fracture toughness, measured at the interface of anodically bonded silicon-glass bimorphs. A new test specimen with a pre-inserted blade has been devised for interfacial fracture toughness measurement. A set of 81 different anodic bonding conditions has been generated based on the three different conditions for four different process parameters of bonding load, bonding temperature, anodic voltage and voltage supply time. Taguchi method has been used to reduce the number of experiments required for the bonding strength evaluation, thus obtaining nine independent cases out of the 81 possible combinations. The interfacial fracture toughness has been measured for the nine cases in the range of 0.03∼6.12 J/㎡. Among the four process parameters, the bonding temperature causes the most dominant influence to the bonding strength with the influence factor of 67.7%. The influence factors of other process parameters, such as anodic voltage and voltage supply time, bonding load, are evaluated as 18%, 12% and 2.3%, respectively. The maximum bonding strength of 7.23 J/㎡ has been achieved at the bonding temperature of 460$\^{C}$ with the bonding load of 45gf/㎠, the applied voltage of 600v and the voltage supply time of 25minites. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | 다구찌 방법에 의한 유리-실리콘 양극접합 계면의 파괴인성치 측정 및 양극접합공정 조건에 따른 접합강도 분석 | - |
dc.title.alternative | Measurement of Glass-Silicon Interfacial Feature Toughness and Experimental Evaluation of Anodic Bonding Process based on the Taguchi Method | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 26 | - |
dc.citation.issue | 6 | - |
dc.citation.beginningpage | 1187 | - |
dc.citation.endingpage | 1193 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.identifier.kciid | ART000871204 | - |
dc.contributor.localauthor | 조영호 | - |
dc.contributor.nonIdAuthor | 강태구 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.