DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최민석 | ko |
dc.contributor.author | 이두용 | ko |
dc.date.accessioned | 2013-03-04T18:35:12Z | - |
dc.date.available | 2013-03-04T18:35:12Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2001-01 | - |
dc.identifier.citation | 대한기계학회논문집A, v.25, no.3, pp.452 - 460 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/83651 | - |
dc.description.abstract | Most of researches of tolerance optimization have used a simple sum of tolerance-cost functions with several constraint equations as an optimization model. However, if there is a machining sequence with more than one processes to complete a part, and machining failure, i.e., out-of-tolerance occurs at one of the intermediate processes, the tolerance-cost of this process should be added by the machining cost of all the previous processes already completed on the part. In this study, an accumulated scrap cost model(ASCM) is proposed considering the scrapped machining cost, and applied to a simple assembly example. The result of tolerance optimization using ASCM is compared with that of using a traditional optimization model to confirm its effectiveness. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | 누적 재가공 비용 모델을 이용한 설계 및 가공 공차의 동시 최적화 | - |
dc.title.alternative | Concurrent Optimization of Design and Machining Tolerances with Accumulated Scrap Cost Model(ASCM) | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 25 | - |
dc.citation.issue | 3 | - |
dc.citation.beginningpage | 452 | - |
dc.citation.endingpage | 460 | - |
dc.citation.publicationname | 대한기계학회논문집A | - |
dc.contributor.localauthor | 이두용 | - |
dc.contributor.nonIdAuthor | 최민석 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.