DC Field | Value | Language |
---|---|---|
dc.contributor.author | 신보성 | ko |
dc.contributor.author | 양동열 | ko |
dc.contributor.author | 최두선 | ko |
dc.contributor.author | 김기돈 | ko |
dc.contributor.author | 이응숙 | ko |
dc.contributor.author | 제태진 | ko |
dc.contributor.author | 황경현 | ko |
dc.date.accessioned | 2013-03-04T16:02:32Z | - |
dc.date.available | 2013-03-04T16:02:32Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2002-03 | - |
dc.identifier.citation | 한국정밀공학회지, v.19, no.3, pp.88 - 94 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | http://hdl.handle.net/10203/83169 | - |
dc.description.abstract | Recently, the life cycle and the lead-time of a product are to be shortened in order to satisfy consumers demand. It is thus important to reduce the time and cost in manufacturing trial products. Several technique have been developed and successfully commercialized in the market of RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome these problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP(High-Speed RP) process. HisRP is a new RP process that is combined high-speed machining with automatic filling. In filling process, Bi58-Sn alloy is chosen as filling material because of the properties of low-melting point, low coefficient of thermal expansion and no harm to environment. Also the use of filling wire it if advantage since it needs simple and flexible mechanism. Then the rapid product, for example a skull, is manufactured for aluminum material by HisRP process with an automatic set-up device thor 4-faces machining. | - |
dc.language | Korean | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 절삭가공과 저융점금속에 의한 쾌속제작용 자동충진공정 개발 | - |
dc.title.alternative | Development of Automatic Filling Process using Low-Melting Point Metal for Rapid Manufacturing with Machining Process | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 19 | - |
dc.citation.issue | 3 | - |
dc.citation.beginningpage | 88 | - |
dc.citation.endingpage | 94 | - |
dc.citation.publicationname | 한국정밀공학회지 | - |
dc.identifier.kciid | ART001189806 | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 신보성 | - |
dc.contributor.nonIdAuthor | 최두선 | - |
dc.contributor.nonIdAuthor | 김기돈 | - |
dc.contributor.nonIdAuthor | 이응숙 | - |
dc.contributor.nonIdAuthor | 제태진 | - |
dc.contributor.nonIdAuthor | 황경현 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.