DC Field | Value | Language |
---|---|---|
dc.contributor.author | 양민양 | ko |
dc.contributor.author | 이호철 | ko |
dc.date.accessioned | 2013-03-04T14:55:05Z | - |
dc.date.available | 2013-03-04T14:55:05Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2001-01 | - |
dc.identifier.citation | 한국정밀공학회지, v.124, pp.65 - 71 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | http://hdl.handle.net/10203/82998 | - |
dc.description.abstract | The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm. | - |
dc.language | Korean | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 최소 이송 기구를 갖는 PC-NC 기반의 비구면 렌즈 연마 장치에 관한 연구 | - |
dc.title.alternative | A Study on PC-NC Based Aspherical Lens Polishing System with Minimum Translation Mechanism | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 124 | - |
dc.citation.beginningpage | 65 | - |
dc.citation.endingpage | 71 | - |
dc.citation.publicationname | 한국정밀공학회지 | - |
dc.contributor.localauthor | 양민양 | - |
dc.contributor.nonIdAuthor | 이호철 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.