DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박진호 | ko |
dc.contributor.author | 남성호 | ko |
dc.contributor.author | 정태성 | ko |
dc.contributor.author | 양민양 | ko |
dc.date.accessioned | 2013-03-04T03:27:15Z | - |
dc.date.available | 2013-03-04T03:27:15Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2004-08 | - |
dc.identifier.citation | 한국정밀공학회지, v.21, no.8, pp.143 - 151 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | http://hdl.handle.net/10203/81727 | - |
dc.description.abstract | This paper deals with the precision NURBS interpolator for wire-EDM. Previous research about OAC (Open Architecture Controller) is mostly aimed at NC cutting machines such as milling or lathes, and hence these results are inadequate to apply to wire-EDM. In contradiction to NC machines, wire-EDM operates relatively slow feed rates and based on a feedback control loop to the machining process. The 2-stage interpolation method which reflects wire-EDM specific characteristics was proposed. The constant interpolation error could be acquired through 1 st stage interpolation. Feed rate regulation was performed through 2nd stage interpolation. The suggested algorithm was implemented to test-bed PC-NC system. Computer simulations and the experimental machining were conducted. | - |
dc.language | Korean | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 와이어컷 방전가공기의 정밀제어를 위한 NURBS 보간기에 관한 연구 | - |
dc.title.alternative | A Study on the Nurbs Interpolator for the Precision Control of Wire-EDM | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 21 | - |
dc.citation.issue | 8 | - |
dc.citation.beginningpage | 143 | - |
dc.citation.endingpage | 151 | - |
dc.citation.publicationname | 한국정밀공학회지 | - |
dc.identifier.kciid | ART000941284 | - |
dc.contributor.localauthor | 양민양 | - |
dc.contributor.nonIdAuthor | 박진호 | - |
dc.contributor.nonIdAuthor | 남성호 | - |
dc.contributor.nonIdAuthor | 정태성 | - |
dc.subject.keywordAuthor | WEDM(와이어 방전가공기) | - |
dc.subject.keywordAuthor | CNC(수치제어장치) | - |
dc.subject.keywordAuthor | Interpolator(보간기) | - |
dc.subject.keywordAuthor | NURBS | - |
dc.subject.keywordAuthor | Open architecture controller(개방형 제어기) | - |
dc.subject.keywordAuthor | PC-NC | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.