DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김진국 | ko |
dc.contributor.author | 조덕현 | ko |
dc.contributor.author | 이대길 | ko |
dc.date.accessioned | 2013-03-03T01:52:02Z | - |
dc.date.available | 2013-03-03T01:52:02Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1999-10 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.23, no.10, pp.1776 - 1787 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/76580 | - |
dc.description.abstract | When the adhesively bonded joint is exposed to high environmental temperature, the tensile load capability of the adhesively bonded joint decreases because the elastic modulus and failure strength of the rubber toughened structural epoxy adhesive decrease. In this paper, the elastic modulus and failure strength of the adhesive as well as the tensile load capability of the tubular single lap adhesively bonded joint were investigated with respect to the volume fraction of filler and the environmental temperature. Two types of fillers such as Al2O3(alumina) and E glass were used. From the experiment, it was found that the elastic modulus and failure strength of the adhesive increased in accordance with the increase of volume fraction of filler and decreased with the environmental temperature rising. Also it was found that the tensile load capability of the tubular single lap adhesively bonded joint decreased as the environmental temperature increased but the tensile load capability of the tubular single lap adhesively bonded joint didn``t always increase as the volume fraction of filler increased due to the thermal residual stresses generated by the difference of coefficients of thermal expansion between the adherend and the adhesive. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | 축방향 하중을 받는 튜브형 단일겹치기 접착 조인트의 열적 특성에 관한 연구 | - |
dc.title.alternative | Thermal Characteristic of the Tubular Single Lap Adhesively Bonded Joint under Axial Loads | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 23 | - |
dc.citation.issue | 10 | - |
dc.citation.beginningpage | 1776 | - |
dc.citation.endingpage | 1787 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.contributor.localauthor | 이대길 | - |
dc.contributor.nonIdAuthor | 김진국 | - |
dc.contributor.nonIdAuthor | 조덕현 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.