Fatigue crack opening stress based on the strip-yield model

Abstract

The modified strip-yield model based on the Dugdale model and two-dimensional approximate weight function method were utilized to evaluate the effect of in-plane constraint, transverse stress, on the fatigue crack closure. The plastic zone sizes and the crack opening stresses considering transverse stress were calculated for four specimens: single edge-notched tension (SENT) specimen, single edge-notched bend (SENB) specimen, center-cracked tension (CCT) specimen, double edge-notched tension (DENT) specimen under uniaxial loading. And the crack opening behavior of the center-cracked specimen under biaxial loading was also evaluated. Normalized crack opening stresses sigma(op)/sigma(max) for four specimens were successfully described by the normalized plastic zone parameter Delta omega'(rev)/omega' considering transverse stress, when Delta omega'(rev) and omega' are the size of the reversed plastic zone at the moment of first crack tip closure and the size of the forward plastic zone for maximum stress, respectively. The normalized plastic zone parameter with transverse stress also was satisfactorily correlated with the behavior of crack closure for CCT specimen under biaxial loading. (C) 2000 Elsevier Science Ltd. All rights reserved.