DC Field | Value | Language |
---|---|---|
dc.contributor.author | 조종래 | ko |
dc.contributor.author | 김동권 | ko |
dc.contributor.author | 이부윤 | ko |
dc.contributor.author | 양동열 | ko |
dc.date.accessioned | 2013-03-03T00:52:17Z | - |
dc.date.available | 2013-03-03T00:52:17Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1995-01 | - |
dc.identifier.citation | 소성가공, v.4, no.2, pp.141 - 150 | - |
dc.identifier.issn | 1225-696X | - |
dc.identifier.uri | http://hdl.handle.net/10203/76340 | - |
dc.description.abstract | The purpose of the open die press forging is to maximize the internal deformation for better structural homogeneity and center-line consolidation in case of the ingot. A two and three dimensional viscoplastic finite element analysis is carried out for the plate, cylinder and square forging with the flat die in order to study the forging effects during the process. Effect of width, height reduction, and die staggering are studied through simulation of the process. Thus favorable working conditions are suggested for better and more disirable product quality. | - |
dc.language | Korean | - |
dc.publisher | 한국소성가공학회 | - |
dc.title | 평다이를 사용한는 자유 단조 공정의 최적 단조 조건에 관한 연구 | - |
dc.title.alternative | Investigation of the Optimal Forging Condition in Open Die Forging With the Flat Die | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 4 | - |
dc.citation.issue | 2 | - |
dc.citation.beginningpage | 141 | - |
dc.citation.endingpage | 150 | - |
dc.citation.publicationname | 소성가공 | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 조종래 | - |
dc.contributor.nonIdAuthor | 김동권 | - |
dc.contributor.nonIdAuthor | 이부윤 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.