Mitigated membrane fouling in a vertical submerged membrane bioreactor (VSMBR)

Abstract

In a laboratory-scale study, characteristics of membrane fouling in an A/O (anoxic/oxic) series membrane bioreactor (MBR) and in a vertical submerged membrane bioreactor(VSMBR) treating synthetic wastewater were compared under the same operating conditions. Accordingly, fouling characteristics of a pilot-scale VSMBR treating municipal wastewater were studied under various operating conditions. Various physical, chemical, and biological factors were used to describe membrane resistances. As a result, it was concluded that high concentrations of extracellular polymeric substances (EPS), high viscosity and a high sludge volume index (SVI) corresponded to high membrane resistance indicating severe membrane fouling in both the laboratory-scale MBRs and the pilot-scale VSMBR. In addition, high fouling potential was observed in the pilot-scale VSMBR at 60-day sludge retention time (SRT). In this case, as hydraulic retention time (HRT) decreased from 10 to 4 h, EPS concentrations increased and the average particle size increased, leading to reduced settling of the sludge and increased membrane fouling. To mitigate fouling, two different methods using air bubble jets were adopted in the pilot-scale VSMBR. As a result, it was found that air backwashing was more efficient for fouling mitigation than was air scouring. (c) 2006 Elsevier B.V. All rights reserved.