Browse "College of Engineering(공과대학)" by Type Thesis(Ph.D)

Showing results 9114 to 9173 of 10596

9114
마그네슘 합금 판재의 변형률속도 의존 이방성/비대칭 항복함수 = Rate dependent anisotropic/asymmetric yield function for magnesium alloy sheetlink

김민기; 허훈; et al, 한국과학기술원, 2019

9115
마이크로 λ-분지관에서 액적 생성에 관한 실험적 연구 = An experimental study on drop formation at micro λ-junctionlink

염수진; Yeom, Su-Jin; et al, 한국과학기술원, 2011

9116
마이크로 분지형 T-분기관에서의 2상 플러그류의 분배 = Split of two-phase plug flow at microscale branching T-junctionlink

김석; Kim, Seok; et al, 한국과학기술원, 2015

9117
마이크로 연료 전지의 연료 개질을 위한 MEMS 촉매 반응기 = MEMS catalytic reactor for fuel reforming in micro fuel cell applicationslink

차홍석; Cha, Hong-Sseok; et al, 한국과학기술원, 2007

9118
마이크로 터빈 엔진의 적외선 신호 특성 및 감소 기술에 관한 연구 = Characterization and reduction of infrared signature of a micro turbine enginelink

구본찬; 백승욱; et al, 한국과학기술원, 2018

9119
마이크로웨이브 가열이 질화규소의 치밀화와 상전이에 미치는 영향 = Effect of microwave heating on densification and phase transformation of silicon nitridelink

김윤창; Kim, Yoon-Chang; 김도경; 김종희; et al, 한국과학기술원, 1997

9120
마이크로웨이브 플라즈마 화학증착법에 의한 다이아몬드 박막의 Heteroepitaxy 성장에 관한 연구 = The study on the heteroepitaxial growth of diamond films synthesized by microwave plasma enhanced chemical vapor depositionlink

김윤기; Kim, Yoon-Kee; et al, 한국과학기술원, 1997

9121
마이크로웨이브에 의한 비정질 실리콘의 저온 고상결정화 거동에 관한 연구 = A study on the low-temperature solid phase crystallization behavior of amorphous silicon thin films by microwave heatinglink

이정노; Lee, Jeong-No; et al, 한국과학기술원, 1997

9122
마이크로파 투과성 세라믹의 유전 특성에 관한 연구 = Dielectric properties of ceramics for microwave windows applicationlink

박민규; Park, Min-Kyu; et al, 한국과학기술원, 2006

9123
마이크로파에 의한 $BaTiO_3$계 세라믹스의 소결거동 및 전기적 특성 = Microwave sintering behavior and electronical properties of $BaTiO_3$ ceramicslink

배강; Bai, Kang; et al, 한국과학기술원, 1994

9124
마찰 감쇠기가 있는 블레이드 디스크의 동적 특성에 관한 연구 = A study on dynamic characteristics of a bladed disk with friction damperslink

유재한; Yoo, Jae-Han; et al, 한국과학기술원, 2006

9125
마찰 접촉문제에 대한 상보성 수식화의 적용 = A complementarity problem formulation for frictional contactlink

이석순; Lee, Seok-Soon; et al, 한국과학기술원, 1989

9126
마찰접촉문제에서의 민감도해석 및 최적설계 = Sensitivity analysis and optimal design for frictional contact problemslink

임세빈; Im, Se-Bin; et al, 한국과학기술원, 1992

9127
막 재순환 반응기에 의한 페니실린 아실라제 생산 대장균의 고농도 배양 = High cell density culture of E. coli producing penicillin acylase in a membrane cell recycle reactorlink

이율락; Lee, Youl-Lark; et al, 한국과학기술원, 1989

9128
막 재순환 생물반응기에서의 효모와 재조합 대장균의 고농도 배양 = High density cell culture of S.cerevisiae and recombinant E. coli in a membrane cell recycle fermenterlink

이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1987

9129
망막 OCT angiography : 시스템 개발 및 이를 이용한 설치류 질병모델에서의 혈관 및 혈류역학적 변화에 대한 종단적 분석 = Retinal optical coherence tomography angiography : system development and application to longitudinal analyses of vascular and hemodynamic changes in rodent disease modelslink

박장렬; 오왕열; et al, 한국과학기술원, 2020

9130
매엽식 웨이퍼 자동선별 라인의 운용 최적화에 관한 연구 = Operational optimization of an automated electrical die sorting line with single-wafer transferlink

주용재; Joo, Yong-Jae; et al, 한국과학기술원, 2009

9131
매우 낮은 동작 전류를 갖는 전반사형 InGaAsP/InP 광스위치 소자에 관한 연구 = Study on the InGaAsP/InP total internal reflection optical switch with very low operation currentlink

오광룡; Oh, Kwang-Ryong; et al, 한국과학기술원, 1994

9132
맥동관 냉동기의 설계 방법과 에너지 흐름 측정 = Design method of pulse tube refrigerator and energy flow measurementlink

기태경; Ki, Tae-Kyung; et al, 한국과학기술원, 2013

9133
멀티 레이트 시스템을 위한 적응 일반화된 예측 제어 = Adaptive generalized predictive control for multirate systemlink

박인오; Park, In-Oh; et al, 한국과학기술원, 1994

9134
멀티레터레이션에 근거한 점회절을 이용한 대영역 표면형상 측정 = Large scale surface profile measurement using point diffraction based on multilaterationlink

김병창; Kim, Byoung-Chang; et al, 한국과학기술원, 2003

9135
멀티콥터 안전성 향상을 위한 작동기 고장허용 적응제어기법 연구 = Research on the actuator fault tolerant adaptive control scheme to enhance safety of multicopterlink

이장호; Lee, Jangho; et al, 한국과학기술원, 2017

9136
메시기반의 공구경로생성에 관한 연구 = A study on the mesh based tool path generationlink

이동윤; Lee, Dong-Yoon; et al, 한국과학기술원, 2005

9137
메조포러스 실리카와 Organosilicate 박막의 제조 및 특성 = Fabrication and characteristics of mesoporous silica and organosilicate thin filmslink

정지인; Jung, Ji-In; et al, 한국과학기술원, 2005

9138
메타포토닉 컬러표시장치에 기반한 가시광 영역에서의 스펙트럼 변환 연구 = (A) study on spectrum modulation through metaphotonic color-imaging device in visible rangelink

이민호; 최경철; et al, 한국과학기술원, 2023

9139
메탄슬폰화욕에서 전착된 Sn 계 솔더 합금의 조성과 미세조직 및 솔더물성에 미치는 도금조건의 영향 = Effects of plating condition on composition, morphology, and solder properties of Sn solder alloy systems electrodeposited from methane sulfonate bathlink

서민석; Suh, Min-Suk; et al, 한국과학기술원, 2000

9140
면내 회전 자유도를 가지는 변형률 평활화 3절점 삼각형 평면 쉘 요소의 개발 = Development of a strain-smoothed 3-node triangular flat shell element with drilling degrees-of-freedomlink

신창민; Shin, Chang-Min; et al, 한국과학기술원, 2014

9141
면내 회전 자유도를 가진 하이브리드 트레프츠 평면 셸 요소의 개발 = Development of hybrid trefftz flat shell element with drilling D.O.F.link

최누리; Choi, Noo-Ri; et al, 한국과학기술원, 2006

9142
면내 회전자유도를 가진 변이 평면 쉘요소의 개발과 이를 이용한 적응적 체눈 세분화 = Development of variable-node flat shell element with drilling degree-of-freedom and its application to adaptive mesh refinementlink

이완훈; Lee, Wan-Hoon; et al, 한국과학기술원, 1995

9143
모델 가스터빈 연소기내의 연소 불안정성 = A study on the instability of combustion in a model gas turbine combustorlink

홍정구; Hong, Jung-Goo; et al, 한국과학기술원, 2008

9144
모델 기반 조향특성 구현을 위한 일반화된 토크 피드백 제어기법 연구 = Generalized torque feedback control method for implementing model-based steering characteristicslink

이동욱; 김경수; et al, 한국과학기술원, 2018

9145
모델링 불확실성과 시간지연이 있는 원격조작기의 강인한 양방향 제어 = Robust bilateral control of teleoperators with modeling uncertainty and time delaylink

이형기; Lee, Hyung-Ki; et al, 한국과학기술원, 1998

9146
모델에 의거한 알고리즘을 이용한 pH 공정제어 = Control of pH processes using model-based algorithmslink

이상득; Lee, Sang-Deuk; et al, 한국과학기술원, 1994

9147
모드모형방법에 의한 간접적 입력규명 = Indirect input identification by modal model techniquelink

김영렬; Kim, Yeong-Ryeol; et al, 한국과학기술원, 1998

9148
모래지반에 설치된 확공형 보강재의 인발 저항력 산정에 관한 연구 = Pullout capacity estimation of an underreamed anchorage installed in sand bedlink

정순용; Jeong, Soon-Yong; et al, 한국과학기술원, 2005

9149
모멘텀 비를 변화한 다중 동축 선회 젯 분사기의 연소 특성에 관한 연구 = Combustion characteristics of multi-element swirl coaxial jet injectors under varying momentum ratioslink

소윤석; 권세진; et al, 한국과학기술원, 2022

9150
모멘트 기반 질량추정을 이용한 고정익 무인항공기 초기 사이징 = Preliminary sizing of fixed-wing UAV using moment-based mass estimationlink

하현석; 안재명; et al, 한국과학기술원, 2022

9151
모바일 연료전지 시스템용 메탄올-과산화수소 산화수증기개질의 특성 = Characteristics of $MeOH-H_2O_2$ oxidative steam reforming for mobile fuel cell applicationslink

박병섭; Park, Byeongseob; et al, 한국과학기술원, 2016

9152
모사학습 및 행동 조합에 기반한 로봇의 작업 행동 학습 및 생성 = Robot task motion generation based on imitation learning and motion compositionlink

조수민; 조성호; et al, 한국과학기술원, 2019

9153
모서리가 절단된 사각 단면의 공기역학적 특성에 관한 실험적 연구 = An experimental study on the aerodynamic characteristics of rectangular cylinders with various corner cutslink

권대건; Kwon, Dae-Kun; et al, 한국과학기술원, 2001

9154
모세관 팽창을 통한 입자의 응축 성장에 관한 연구 = Condensational growth of particles through expansion in a capillary tubelink

정해영; Jeong, Hae-Young; et al, 한국과학기술원, 2001

9155
모아레 기법을 이용한 인체 형상의 삼차원 측정 = 3-D profile measurement of human bodies using $Moiré$ topographylink

정문식; Jeong, Moon-Sik; et al, 한국과학기술원, 2002

9156
모아레를 이용한 고온-고습 환경에서 플립 칩 전자 패키지의 신뢰성 평가 = Reliability evaluation for flip-chip electronic packages under high temperature and moisture condition using Moirelink

박진형; Park, Jin-Hyoung; et al, 한국과학기술원, 2009

9157
모아레현상을 이용한 스핀들의 반경방향 회전오차 측정 = Measurement of radial motion of spindle by moire phenomenonlink

박윤창; Park, Yoon-Chang; et al, 한국과학기술원, 1994

9158
모양적응 이산변환에 기반한 객체 지향 워터마킹 기법과 이계층 워터마킹 기법 = Object-oriented watermarking method based on PSADT(Polar coordinates shape adaptive discrete transform) and two-layer watermarking methodlink

고윤호; Ko, Yun-Ho; et al, 한국과학기술원, 2002

9159
모양정보 압축을 위한 다각형 근사화 및 응용 = Polygonal approximation for shape information reduction and its applicationslink

정재원; Chung, Jae-Won; et al, 한국과학기술원, 1998

9160
목적기초연구 관리시스템 구축방안 연구 = A study on management system for mission-oriented basic researchlink

김진수; Kim, Jin-Soo; et al, 한국과학기술원, 2001

9161
몬테카를로 시뮬레이션을 이용한 열간 단조용 중탄소강의 오스테나이트 결정립 조대화 모사 연구 = Research on austenite grain coarsening of hot forging medium carbon steel using monte carlo simulationlink

김태형; Kim, Tae-Hyung; et al, 한국과학기술원, 2013

9162
몰폴로지 스펙트럼을 가진 에폭시/폴리술폰 Semi-IPN = Epoxy/Polysulfone semi-IPN with morphology spectrumlink

민현성; Min, Hyun-Sung; et al, 한국과학기술원, 2001

9163
무산소 환경 NaBH4/H2O2 직접 연료전지의 친수성 전극 제작과 안정제 농도에 따른 장기 성능 = Hydrophilic electrode and effect of stabilizer concentration on long-term performance of direct NaBH4/H2O2 fuel cell for air independent propulsionlink

장보선; Jang, Bosun; et al, 한국과학기술원, 2015

9164
무선 데이터 방송 환경에서 부분 부합 질의의 효과적인 처리 = Effective processing of partial match queries in wireless data broadcasting environmentslink

이지연; Lee, Ji-Yeon; et al, 한국과학기술원, 2001

9165
무시멘트 인공 고관절 수술을 위한 골수강 가이드 이용 브로치 시스템의 설계 및 평가 = Design and evaluation of guided broach system for cementless total hip arthroplastylink

박영배; Park, Young-Bae; et al, 한국과학기술원, 2006

9166
무연 및 저연 Sn 계 솔더의 열역학적 합금설계 및 특성평가 = Thermodynamics-aided alloy design and evaluation of Pb-free and low Pb-bearing Sn solder alloy systemslink

윤승욱; Yoon, Seung-Wook; et al, 한국과학기술원, 1998

9167
무연 소더에서의 재료 거동 및 열피로 특성에 대한 미세 구조 영향 = Effects of microstructure on material behaviors and fatigue properties of lead-free solder materialslink

황태경; Hwang, Tae-Kyung; et al, 한국과학기술원, 2007

9168
무연 솔더와 Ni-Cu 합금 UBM 간의 계면 반응 및 신뢰성에 관한 연구 = Study on the reaction and reliability of Ni-Cu alloy UBM with Pb-free solderslink

한훈; Han, Hun; et al, 한국과학기술원, 2005

9169
무연솔더의 크리프에 미세구조와 솔더볼 형상이 미치는 영향에 관한 연구 = Effects of microstructure and solder ball geometry on creep deformation of lead-free solderlink

김성범; Kim, Sung-Bum; et al, 한국과학기술원, 2011

9170
무요소 다중 스케일 방법을 이용한 국부현상문제의 해석에 관한 연구 = A study on the meshfree multi-scale method for the analysis of local phenomenon problemslink

연정흠; Yeon, Jeoung-Heum; et al, 한국과학기술원, 2005

9171
무인기용 경량 PEM 연료전지의 마그네슘 분리판 제작 및 성능평가 = Fabrication and performance evaluation of magnesium bipolar plates of lightweight PEM fuel cell for UAVlink

박토순; Park, To-Soon; et al, 한국과학기술원, 2014

9172
무인기용 액티브 전력제어장치 개발 및 성능 평가 = Development and performance evaluation of active power management system for UAV'slink

이보화; Lee, Bohwa; et al, 한국과학기술원, 2016

9173
무전해 Ni(P)에 W첨가가 무연 솔더와의 계면 반응 및 기계적 신뢰성에 미치는 영향에 대한 연구 = A study on the effect of W alloying in Ni(P) film on the interfacial reactions and mechanical reliabilities in lead-free solderlink

장동민; Jang, Dong-Min; et al, 한국과학기술원, 2011

rss_1.0 rss_2.0 atom_1.0