Browse "College of Engineering(공과대학)" by Type Thesis(Ph.D)

Showing results 8619 to 8678 of 10596

8619
가공 및 조립오차가 능동 자기베어링으로 지지된 축의 성능에 미치는 영향 = The influence of the machining and assembling errors on the performance of the shaft supported by active magnetic bearingslink

김대곤; Kim, Dae-Gon; et al, 한국과학기술원, 1998

8620
가교 폴리우레탄 복합재의 제조와 물성에 관한 연구 = Preparation and Properties of Crosslinked Polyurethane Compositeslink

김창기; Kim, Chang-Kee; et al, 한국과학기술원, 2008

8621
가법적 중복 적응 제어기를 이용한 제어 시스템의 신뢰도 향상에 관한 연구 = A srudy on enhancing reliability of control systems via additive redundant adaptive controllerlink

조영조; Cho, Young-Jo; et al, 한국과학기술원, 1989

8622
가변 6-포트 직접 변환 송신부와 수신부의 구조 연구 = A study on tunable direct conversion six-port transmitter and receiverlink

김동조; Kim, Dong-Zo; et al, 한국과학기술원, 2010

8623
가변 마찰 감쇠기를 이용한 트러스 구조물의 반능동 진동 제어 = Semi-active vibration control of truss structures by variable friction damperslink

박영민; Park, Young-min; et al, 한국과학기술원, 2014

8624
가변 유압 모터를 이용한 전기유압식 속도 서보 시스템의 동특성 해석및 제어 = Dynamic analysis and control of an electrohydraulic speed servo system using variable displacement motorlink

김철수; Kim, Chul-Soo; et al, 한국과학기술원, 1996

8625
가변 트래픽 교차로 제어를 위한 유전 알고리즘 기반 퍼지 교통 제어기 = A Genetic algorithm-based fuzzy traffic controller for an intersection with time-varying flow rateslink

허남철; Huh, Nam-Chul; et al, 한국과학기술원, 2003

8626
가변밸브기구와 직접분사 방식을 이용한 예혼합 압축 착화 엔진 연구 = Homogeneous charge compression ignition engine with variable valve timing and direct injectionlink

염기태; Yeom, Ki-Tae; et al, 한국과학기술원, 2007

8627
가상 셀 네트워크에서 인지 기반 자원 관리 방안 = Cognition-based resource management in virtual cell networklink

Jo, O-Hyun; 조오현; et al, 한국과학기술원, 2011

8628
가상 운전자를 이용한 차량 시스템의 주행 시뮬레이션에 관한 연구 = Driving simulation of a vehiclesystem with an artificial driverlink

심정수; Shim, Jeong-Soo; et al, 한국과학기술원, 1993

8629
가상 절점 다각형 요소의 성능 개선과 고차 근사 확장 및 적응적 세분화로의 응용 = Performance improvement and higher-order extension of virtual node polygonal elements and their application to adaptive refinementlink

오현철; Oh, Hyeon Cheol; et al, 한국과학기술원, 2015

8630
가상 접선 벡터를 기반으로 한 모바일 로봇의 실시간 반응적 주행 = Real-time reactive navigation of mobile robots based on virtual tangential vectorlink

곽경운; Kwak, Kyung-Woon; et al, 한국과학기술원, 2013

8631
가솔린 직접 분사식 압축착화엔진에서 성층 연소 전략을 통한 성능 개선 = Performance improvement by stratified combustion strategy in gasoline direct-injection compression-ignition engineslink

김기현; Kim, Ki-Hyun; et al, 한국과학기술원, 2014

8632
가솔린 직접분사식 4행정 엔진의 성능개선에 관한 연구 = A study on the development of gasoline direct injection 4-stroke enginelink

이용표; Lee, Yong-Pyo; et al, 한국과학기술원, 1999

8633
가솔린 직접분사식 엔진용 고압선회식 분사기 노즐의 분무특성 파악 및 성능최적화 연구 = Spray characterization and performance optiminization of high pressure swirl injector nozzles for gasoline direct injection engineslink

장창수; Jang, Chang-Soo; et al, 한국과학기술원, 2000

8634
가스 질화처리된 총강 표면층의 미세균열 거동 및 스폴링 거동 = Microscopic cracking and spalling behavior of the surface layer of a gas-nitrided gun borelink

이명준; Lee, Myung-Jun; et al, 한국과학기술원, 2004

8635
가스연료엔진의 여러 가지 운전 조건하에서의 유해 배기물 측정을 통한 오존발생특성에 관한 연구 = The characterization of ozone formation under various operating conditions utilizing the measurement of exhaust gas emissions from gaseous fueled enginelink

김창업; Kim, Chang-Up; et al, 한국과학기술원, 2000

8636
가시화 급속 압축 팽창 장치에서 고속 스파크 점화 연소에 대한 선회효과 연구 = Effects of swirl on high speed S.I Combustion in an optical rapid compression and expansion machinelink

한정옥; Han, Jeong-Ok; et al, 한국과학기술원, 1992

8637
가압순환유동층에서의 고체재순환 및 열전달 특성 = Solids recycle and heat transfer characteristics in a pressurized circulating fluidized bed systemlink

김성원; Kim, Sung-Won; et al, 한국과학기술원, 2002

8638
가열된 다공성 재료 표면에 충돌하는 액적의 증발거동 = Evaporation behavior of a water droplet impinging onto heated porous substrateslink

기준우; Kee, June Woo; et al, 한국과학기술원, 2016

8639
가열로 내 연소현상 및 슬랩 가열 특성에 관한 연구 = Combustion phenomena and slab heating characteristics in a reheating furnacelink

한상헌; Han, Sang-Heon; et al, 한국과학기술원, 2007

8640
가입자계를 위한 다목적 광섬유망 = Multi-purpose fiber-optic access network(MFAN)link

한관희; Han, Kwan-Hee; et al, 한국과학기술원, 2004

8641
가진된 분류와 분류 확산화염의 혼합 구조에 관한 실험적 연구 = An experimental study on the structure of forced jets and jet diffusion flameslink

오세기; Oh, Sai-Kee; et al, 한국과학기술원, 1997

8642
가진력크기제어를 통한 보형 구조물의 피로균열 규명 = Fatigue crack identification of beam-type structures using excitation force magnitude controllink

김도균; Kim, Do-Gyoon; et al, 한국과학기술원, 2011

8643
각도 가중 위그너-빌 분포함수 : 기본 이론 및 응용 = Smoothed wigner-ville distribution with angle weighted window : theory and applicationlink

박연규; Park, Yon-Kyu; et al, 한국과학기술원, 1998

8644
각진 두 도선으로 된 전송선의 해석과 전자파 유도 현상에의 응용 = Analysis of arbitrarily angled two-wire transmission line and its application to the electromagnetic couplinglink

홍성용; Hong, Sung-Yong; et al, 한국과학기술원, 1994

8645
각형 개재물의 모서리에 존재하는 계면 균열의 해석 = Analysis of an interfacial crack in the corner of rectangular inclusionlink

반용운; Pahn, Lyong-Oon; et al, 한국과학기술원, 1999

8646
간섭 무늬 최대점 이동량의 감지를 이용한 초정밀 변위 측정 시스템 = High precision displacement measuring system using the detection of fringe peak movementlink

이종훈; Yi, Jong-Hoon; et al, 한국과학기술원, 2001

8647
간섭법 기반의 정밀 광 측정을 위한 고출력 광섬유 펨토초 레이저 개발 = Development of a high power fiber femtosecond laser for precision optical metrology based on interferometrylink

김승만; Kim, Seung-Man; et al, 한국과학기술원, 2013

8648
간섭원리를 이용한 이송축의 진직 운동 정확도 측정 = Measurement of moving accuracy of a precision machine axis with laser interferometrylink

임노빈; Yim, Noh-Bin; et al, 한국과학기술원, 2000

8649
간섭형 잡음억제를 이용한 DWDM 광통신 시스템 = Interferometric noise suppression based DWDM optical systemlink

유상화; Yoo, Sang Hwa; et al, 한국과학기술원, 2015

8650
간접 경계적분식과 가중함수를 이용한 응력강도계수의 계산 = Calculation of the stress intensity factors using indirect boundary integral equation and weight fuctionlink

이형연; Lee, Hyeong-Yeon; et al, 한국과학기술원, 1995

8651
간접장의 와전류에 의한 자성을 갖는 가스 공급배관의 금속적 결함 검출에 관한 연구 = Analysis of metal defects detection on ferromagnetic gas distribution pipe by remote field eddy current (RFEC)link

양종화; Yang, Jong-Hwa; et al, 한국과학기술원, 2001

8652
갈륨의 고정점을 이용한 파브리-페로 공진기의 열적 안정화 = Active thermal stabilization of fabry-perot etalons using the fixed melting temperature of galliumlink

김태호; Keem, Tae-Ho; et al, 한국과학기술원, 2002

8653
감정 강도 조절이 가능한 시퀀스-투-시퀀스 감정 음성 변환 기술 = Sequence-to-sequence emotional voice conversion with strength controllink

최희진; 한민수; et al, 한국과학기술원, 2021

8654
감정 상호작용 로봇의 화자독립 감정인식 = Speaker-independent emotion recognition of emotional interaction robotlink

김은호; Kim, Eun-Ho; et al, 한국과학기술원, 2009

8655
강열점소성 유한요소법을 이용한 3차원 성형 공정 해석에서의 접촉 처리 및 병렬 처리를 위한 연구 = Three-dimensional contact treatment and parallel processing of thermo-rigid-viscoplastic finite element analysis of forming processlink

김수영; Kim, Soo-Young; et al, 한국과학기술원, 2000

8656
강유전체 박막 커패시터의 특성분석을 위한 물리적 모델링에 관한 연구 = A study on the physical modeling for the characterization of the ferroelectric thin film capacitorslink

김용일; Kim, Yong-Il; et al, 한국과학기술원, 2000

8657
강인 예견 제어기 설계에 관한 연구 : 궤도 차량에의 응용 = Robust Preview controller design : application to tracked vehicle systemslink

류성필; Ryu, Seong-Pil; et al, 한국과학기술원, 2006

8658
강인한 반복 학습 제어기의 주파수 영역 해석 및 설계 = Frequency domain analysis and design of a robust iterative learning controllerlink

노철래; Roh, Cheol-Lae; et al, 한국과학기술원, 1996

8659
강인한 음성 인식을 위한 음향 채널 보상 알고리즘 = Acoustic channel compensation for robust speech recognitionlink

정소영; Jeong, So-Young; et al, 한국과학기술원, 2003

8660
강자성체/부도체 다층박막에서의 자기적 수송현상에 대한 연구 = A study of magnetotransport phenomena in ferromagnetic/insulator multilayer thin filmlink

조영목; Cho, Young-Mok; et al, 한국과학기술원, 2002

8661
개방형 PC-NC를 위한 객체지향 보간기에 관한 연구 = A study on the object oriented interpolator for the open architecture PC-NClink

남성호; Nam, Sung-Ho; et al, 한국과학기술원, 2003

8662
개별요소법을 이용한 지반네일 보강토체의 해석/설계방법 개발 = Development of analysis and design method for nailed earth structures by discrete element methodlink

김준석; Kim, Joon-Seok; et al, 한국과학기술원, 1996

8663
개선된 경계조건을 이용한 내연기관 덕트 유동과 음향파 거동의 시간영역 해석 = A time domain analysis of non-linear wave dynamics in IC engine flow ducts with improved boundary conditionslink

채강석; Chae, Kang-Seog; et al, 한국과학기술원, 2001

8664
개선된 반복 학습제어 알고리즘 및 대규모 시스템에의 응용 = Improved iterative learning control algorithms and their applications for large scale dynamic systemslink

황동환; Hwang, Dong-Hwan; et al, 한국과학기술원, 1991

8665
개선된 선택적 정밀도 합성방법을 이용한 평면4절 기구의 최적합성 = Optimization of planar four-bar mechanisms using modified selective precision synthesislink

김경영; Kim, Kyung-Young; et al, 한국과학기술원, 1995

8666
개선된 이동 프레임 음향 홀로그래피 방법을 이용한 이동하는 협대역 소음원의 방사 음장 가시화 = Visualization of noise generated by moving band-limited noise sources by means of an improved moving frame acoustic holographylink

박순홍; Park, Soon-Hong; et al, 한국과학기술원, 2001

8667
객체관계형 DBMS에서 타입수준 액세스 패턴에 의거한 선인출 = Prefetching based on the type-level access pattern in object-relational DBMSslink

한욱신; Han, Wook-Shin; et al, 한국과학기술원, 2001

8668
객체지향 데이타베이스 시스템에서 의도형 권한을 이용한 묵시적 권한부여 = Implicit authorization using intention type authorizations in object-oriented database systemslink

손태종; Son, Tae-Jong; et al, 한국과학기술원, 1999

8669
객체지향 데이타베이스 시스템에서 지속성 객체와 객체 버퍼 관리 = Persistent object and object buffer management in object-oriented database systemslink

박종목; Park, Chong-Mok; et al, 한국과학기술원, 1997

8670
객체지향 데이타베이스 시스템에서 질의 최적화 기법 = Query optimization techniques in object-oriented database systemslink

조완섭; Cho, Wan-Sup; et al, 한국과학기술원, 1996

8671
거품에서의 기포합착 및 거품 분리기술에 의한 구리(Ⅱ) 이온 제거에 관한 연구 = A study on the bubble coalescence in foam and the removal of copper(Ⅱ) ion byfoam separation techniqueslink

최상준; Choi, Sang-June; et al, 한국과학기술원, 1987

8672
건물기초의 형식선정 및 구조설계를 위한 일관 시스템 = A system for type selection and structural design of building foundationslink

김한수; Kim, Han-Soo; et al, 한국과학기술원, 1993

8673
게이트 상류에서의 퇴적물 이송에 대한 모델 개발 = Model development for sediment transportation upstream of a gatelink

석관수; Seok, Kwan Soo; et al, 한국과학기술원, 2015

8674
격자 방법을 이용한 로봇 기구학의 작업지향적 설계 = Task-oriented design of robot kinematics using grid methodlink

박준영; Park, Joon-Young; et al, 한국과학기술원, 2004

8675
격자형 다공질 연소기의 상, 하부 화염거동에 관한 연구 = A study on the flame behavior for upper and lower solutions in a honeycomb ceramic combustorlink

이용일; Lee, Yong-Il; et al, 한국과학기술원, 1996

8676
격자형 세라믹 내에서의 층류 예혼합 연소 = Laminar premixed combustion in a honeycomb ceramiclink

민대기; Min, Dae-Ki; et al, 한국과학기술원, 1989

8677
결정 성장 뉴런을 이용한 신경회로망 분류기 설계와 그 응용 = A new neural network classifier design based on crystal growth neuron model and its applicationslink

고국원; Ko, Kuk-Won; et al, 한국과학기술원, 2001

8678
결정체의 연성 / 취성 파괴거동에 관한 연구 = A study on the ductile / brittle fracture behavior of crystalline solidslink

김덕훈; Kim, Deok-Hoon; et al, 한국과학기술원, 1992

rss_1.0 rss_2.0 atom_1.0