Showing results 38341 to 38360 of 63138
Optimal design of filament wound structures under internal pressure based on the semi-geodesic path algorithm Kim, CU; Kang, JH; Hong, Chang Sun; Kim, Chun-Gon, COMPOSITE STRUCTURES, v.67, no.4, pp.443 - 452, 2005-03 |
Optimal design of filament wound type 3 tanks under internal pressure using a modified genetic algorithm Kim, CU; Hong, Chang Sun; Kim, Chun-Gon; Kim, JY, COMPOSITE STRUCTURES, v.71, no.1, pp.16 - 25, 2005-10 |
Optimal design of heat and water recovery system utilizing waste flue gases for refinery CO2 reduction Yoo, Haeun; Roh, Kosan; Al Hunaidy, Ali S.; Imran, Hasan; Lee, Jay Hyung, COMPUTERS & CHEMICAL ENGINEERING, v.124, pp.140 - 152, 2019-05 |
Optimal design of high precision XY-scanner with nanometer-level resolution and millimeter-level working range Kang, Dongwoo; Kim, Kihyun; Kim, Dongmin; Shim, Jongyoup; Gweon, Dae-Gab; Jeong, Jaehwa, MECHATRONICS, v.19, no.4, pp.562 - 570, 2009-06 |
Optimal design of microalgae-based biorefinery: Economics, opportunities and challenges Rizwan, Muhammad; Lee, Jay Hyung; Gani, Rafiqul, APPLIED ENERGY, v.150, pp.69 - 79, 2015-07 |
Optimal design of offshore wind power farm in high resolution using geographical information system Kim, Sunwoo; Kang, Seongwhan; Lee, Jay H., COMPUTERS & CHEMICAL ENGINEERING, v.174, 2023-06 |
Optimal design of periodic test input signals for multivariable impulse response models Kaisare, Niket S.; Lee, Jay H., OPTIMAL CONTROL APPLICATIONS METHODS, v.31, no.5, pp.451 - 469, 2010-09 |
Optimal Design of Planar Three Degree of Freedom Redundant Manipulator Using Iterative Orthogonal Array Based Optimization kim kk; Yoon, Yong-San, SME TRANSACTIONS ON ROBOTICS RESEARCH, v.2, no.6, pp.1 - 20, 1992 |
Optimal design of rotary-type voice coil motor using multisegmented magnet array for small form factor optical disk drive Jeong, Jaehwa; Gweon, Dae-Gab, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, v.46, no.5A, pp.2912 - 2914, 2007-05 |
Optimal Design of Scara Type Robot Arm Section for Minimum Cycle Time Kim, Soohyun, MECHANICS IN DESIGN, pp.373 - 387, 1996 |
Optimal design of step-stress accelerated degradation tests based on the Wiener degradation process Sung, Si Il; Yum, Bong-Jin, QUALITY TECHNOLOGY AND QUANTITATIVE MANAGEMENT, v.13, no.4, pp.367 - 393, 2016 |
Optimal Design of Step-Stress Degradation Tests in the Case of Destructive Measurement Park, Sang-Jun; Yum, Bong-Jin; S. Balamurali, QUALITY TECHNOLOGY AND QUANTITATIVE MANAGEMENT, v.1, no.1, pp.105 - 124, 2004 |
Optimal design of the adhesively-bonded tubular single lap joint Lee, SJ; Lee, Dai Gil, JOURNAL OF ADHESION, v.50, no.2-3, pp.165 - 180, 1995 |
Optimal design of the exhaust system layout to suppress the discharge noise from an idling engine Ih, Jeong-Guon; Choi, C. -Y.; Kim, T. -K.; Jang, S. -H.; Kim, H. -J., INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.12, no.4, pp.617 - 630, 2011-08 |
Optimal design of the press fit joint for a hybrid aluminum/composite drive shaft Kim, HS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.70, no.1, pp.33 - 47, 2005-08 |
Optimal design of the pulse tube refrigerator with slit-type heat exchangers Ki, Tae Kyung; Jeong, Sangkwon, CRYOGENICS, v.50, pp.608 - 614, 2010-09 |
Optimal design of thrust bearing for high-speed composite air spindles Kyung Geun Bang; Hui Yun Hwang; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, v.1/2, pp.173 - 197, 2004-06 |
Optimal design of voice coil motor for micro stage Jeong, Jae Heon; Kim, Myeong Hyeon; Woo, Siwoong; Gweon, Dae-Gab; Hong,Dongpyo, Applied Mechanics and Materials, v.607, pp.507 - 510, 2014-07 |
Optimal Design of Wireless Charging Electric Bus System Based on Reinforcement Learning LEE, HYUKJOON; Ji, Dong Jin; Cho, Dong-Ho, ENERGIES, v.12, no.7, 2019-04 |
Optimal Determination of Antenna Height and Power in a Mass per Swath Width Sense for a Given Incidence Angle Park, KM; Kim, Hyung-Myung, IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, v.45, pp.799 - 802, 2009-04 |
Discover