Integral Cycle Mode Control of the Series Resonant Converter

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 927
  • Download : 871
DC FieldValueLanguage
dc.contributor.authorJoung, Gyu Bum-
dc.contributor.authorRim, Chun-Tack-
dc.contributor.authorCho, Gyu-Hyeong-
dc.date.accessioned2008-08-06-
dc.date.available2008-08-06-
dc.date.issued1989-01-
dc.identifier.citationIEEE Transactions on Power Electronics, Vol. 4. No. 1, pp83-91en
dc.identifier.issn0885-8993-
dc.identifier.urihttp://ieeexplore.ieee.org/iel3/63/885/00021875.pdf-
dc.identifier.urihttp://hdl.handle.net/10203/6846-
dc.description.abstractnew control method for the series resonant converter (SRC) in which the device switching instants are always synchronized to the zero crossing points of the resonant current is proposed. Output voltage is controlled by proper selection of the switch modes by varying the duty ratio of powering mode and free resonant mode. Each switch mode is analyzed and the dc transfer function is obtained. It is also shown that the simulation results coincide well with the practical case. The SRC with the proposed control scheme shows many advantages, such as low current switching stress, low switching loss, low electromagnetic interference, high input power factor, and wide control range. Some of these characteristics are verified experimentally.en
dc.language.isoen_USen
dc.publisherIEEEen
dc.subjectResonant Converteren
dc.subjectPoweren
dc.titleIntegral Cycle Mode Control of the Series Resonant Converteren
dc.typeArticleen

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0