DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박현구 | ko |
dc.contributor.author | 김명철 | ko |
dc.contributor.author | 김승우 | ko |
dc.date.accessioned | 2013-02-27T06:11:35Z | - |
dc.date.available | 2013-02-27T06:11:35Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1994-05 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.18, no.5, pp.1182 - 1191 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/66907 | - |
dc.description.abstract | This paper presents an enhanced method of slit beam projection intended for the rapid measurement of 3-dimensional surface profiles of dies and molds. Special emphasis is given to optimizing the design of optical system so that the measuring accuracy can be maximized by adopting two-plane camera calibration together with sub-pixel image processing techniques. Finally, several measurement examples are discussed to demonstrate that an actual measuring accuracy of ± 0.2 mm can be achieved over the measuring range of 500 mm{\times}300mm{\times}200mm.$ | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | 슬릿광 3차원 형상측정에서 측정분해능 최적화를 위한 시스템설계 및 카메라보정 | - |
dc.title.alternative | System Design and Camera Calibration of Slit Beam Projection for Maximum Measuring Accuracy | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 18 | - |
dc.citation.issue | 5 | - |
dc.citation.beginningpage | 1182 | - |
dc.citation.endingpage | 1191 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.contributor.localauthor | 김승우 | - |
dc.contributor.nonIdAuthor | 박현구 | - |
dc.contributor.nonIdAuthor | 김명철 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.