DC Field | Value | Language |
---|---|---|
dc.contributor.author | 변승완 | ko |
dc.contributor.author | 이종원 | ko |
dc.date.accessioned | 2013-02-27T05:52:28Z | - |
dc.date.available | 2013-02-27T05:52:28Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1981 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.5, no.4, pp.303 - 311 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/66832 | - |
dc.description.abstract | Machine tool dynamics is investigated under actual working conditions. Experimental evaluation of cutting dynamics in a lathe is made with cutting conditions and cutting positions varied. The thrust force and the toolpost and tailstock accelerations during turning process are modelled and analyzed by employing Dynamic Data System methodology. It is found that two acceleration signals are good enough to replace the thrust force, when used for machine tool identification under cutting process and for chatter detection. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | DDC방식에 의한 공작기계 절삭 특성 규명 | - |
dc.title.alternative | Machine tool identification under actual cutting process by DDS analysis | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 5 | - |
dc.citation.issue | 4 | - |
dc.citation.beginningpage | 303 | - |
dc.citation.endingpage | 311 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.contributor.localauthor | 이종원 | - |
dc.contributor.nonIdAuthor | 변승완 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.