DC Field | Value | Language |
---|---|---|
dc.contributor.author | 정광섭 | ko |
dc.contributor.author | 이대길 | ko |
dc.contributor.author | 곽윤근 | ko |
dc.date.accessioned | 2013-02-27T05:21:24Z | - |
dc.date.available | 2013-02-27T05:21:24Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1994-06 | - |
dc.identifier.citation | 한국복합재료학회지, v.7, no.2, pp.1 - 13 | - |
dc.identifier.issn | 1598-6934 | - |
dc.identifier.uri | http://hdl.handle.net/10203/66676 | - |
dc.description.abstract | A new manufacturing method of the cup type composite flexspline for a harmonic drive is developed using adhesive joining technology to obviate the manufacturing difficulty of the conventional one-piece cup type steel flexspline. and to improve the dynamic characteristics of the flexspline.In this method, the boss, tube, and tooth sections of the flexspline are designed and manufactured separately, and adhesively bonded. The tube section is manufactured with high strength carbon fiber epoxy composite materials and its dynamic properties are compared with the conventional steel flexspline.From the test results of the manufactured composite flexspline and the conventional steel flexspline, it was found that the manufactured composite flexspline had better torque transmission capability, and the stiffness in the circumferential direction. Also. it was found that the damping of the composite flexspline were considerably improved. | - |
dc.language | Korean | - |
dc.publisher | 한국복합재료학회 | - |
dc.title | 하모닉 드라이브용 복합재 플렉스플라인의 신 제조기술 | - |
dc.title.alternative | New Manufacturing Method of the Composite Flexspline for a Harmonic Drive | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 7 | - |
dc.citation.issue | 2 | - |
dc.citation.beginningpage | 1 | - |
dc.citation.endingpage | 13 | - |
dc.citation.publicationname | 한국복합재료학회지 | - |
dc.contributor.localauthor | 이대길 | - |
dc.contributor.nonIdAuthor | 정광섭 | - |
dc.contributor.nonIdAuthor | 곽윤근 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.