DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이수정 | ko |
dc.contributor.author | 이대길 | ko |
dc.date.accessioned | 2013-02-27T05:15:28Z | - |
dc.date.available | 2013-02-27T05:15:28Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1992-01 | - |
dc.identifier.citation | 한국복합재료학회지, v.5, no.1, pp.27 - 36 | - |
dc.identifier.issn | 1598-6934 | - |
dc.identifier.uri | http://hdl.handle.net/10203/66653 | - |
dc.description.abstract | The accurate calculation of the stresses and torque capacities of the adhesive bonded joints is not possible without understanding of the failure phenomena of the adhesive joints and the nonlinear behavior of the adhesive. In this paper, the adhesive failure model of the adhesive bonded tubular single lap joint with steel-steel adherends was proposed to predict the torque capacity accurately. The model incorporated the nonlinear behavior of the adhesive and the different failure modes in which the adhesive failure mode changed from the bulk shear failure. via the transient failure. to the interracial failure between the adhesive and the adherend, according to the magnitudes of the fabrication thermal residual stresses. | - |
dc.language | Korean | - |
dc.publisher | 한국복합재료학회 | - |
dc.title | 원형 Single Lap 접착 조인트의 파괴 모델에 관한 연구 | - |
dc.title.alternative | Development of the Failure Model for the Adhesively Bonded Tubular Single Lap Joint | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 5 | - |
dc.citation.issue | 1 | - |
dc.citation.beginningpage | 27 | - |
dc.citation.endingpage | 36 | - |
dc.citation.publicationname | 한국복합재료학회지 | - |
dc.contributor.localauthor | 이대길 | - |
dc.contributor.nonIdAuthor | 이수정 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.