DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박승교 | ko |
dc.contributor.author | 양동열 | ko |
dc.date.accessioned | 2013-02-27T04:39:54Z | - |
dc.date.available | 2013-02-27T04:39:54Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1985-11 | - |
dc.identifier.citation | 대한기계학회논문집A, v.9, no.6, pp.777 - 787 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/66490 | - |
dc.description.abstract | The study is concerned with the analysis of flanging as a sheet metal working process. In terms of mechanics, the flanging process can be divided into two groups, i.e, shrink flanging and stretch flanging. In this study, the shrink flanging process is analyzed by using the proposed energy criterion and the forming limit is found for the process. The forming limit for stretch flanging is also found by employing the neckind theory. Experiments are carried out for both processes. Approximate forming limits are obtained from the experiments. An approximate method to calculate the punch force is proposed and the computed results are compared with the experimental results. It is shown that there are good agreements in forming limits and punch forces between theory and experiments. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | 플랜징 공정 의 성형한계 에 대한 이론 및 실험적 연구 | - |
dc.title.alternative | A Theoretical and Experimental Study on Forming Limits in the Flanging Processes | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 9 | - |
dc.citation.issue | 6 | - |
dc.citation.beginningpage | 777 | - |
dc.citation.endingpage | 787 | - |
dc.citation.publicationname | 대한기계학회논문집A | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 박승교 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.