Akhmadjonov Akromjon; Bae, Kyung Taek; Lee, Kang Taek, NANO-MICRO LETTERS, v.16, no.1, 2024-12
Bae, Ji Eun; Hyun, Minji; Kim, Deok Woo; Mateos, Xavier; Ajates, Javier Garcia; Romero, Carolina; De Aldana, Javier Rodriguez Vazquez; Kim, Jungwon; Rotermund, Fabian, OPTICS AND LASER TECHNOLOGY, v.179, 2024-12
Ravichandran, Naresh Kumar; Kim, Hyemi; Park, Joonha; Hur, Hwan; Kim, Jinsung; Bae, Ji Yong; Hyun, Sangwon; Kim, I. Jong; Kim, Dong Uk; Lee, Sang-Chul; Chang, Ki Soo; Muniraj, Inbarasan; Jeon, Jessie S.; Nam, Ki-Hwan; Lee, Kye-Sung, OPTICS AND LASER TECHNOLOGY, v.179, 2024-12
Kim, Minjik; Kook, Junghwan; Andersen, Peter Risby; Lee, Ikjin, Advances in Engineering Software, v.197, pp.103748, 2024-11
Gu J.; Jung Y.; Ahn J.; Ahn J.; Choi J.; Kang B.; Jeong Y.; Ha J.-H.; Kim T.; Jung Y.; Park J.; Jung J.; Ryu S.; Lee I.; Park I., Nano Energy, v.130, 2024-11
Park, Yuhyun; Choi, Sunkun; Ryou, KenHee; Park, JungHun; Choi, Won Seok; Ko, Won-Seok; Choi, Pyuck-Pa; Sim, Gi-Dong, Materials Science and Engineering: A, v.915, pp.147250, 2024-11
Song, Yeo-Ul; Song, Byeong Uk; Jung, Min-Kyo; Lee, Changwoo; Choi, Joon Phil; Lee, Ikjin, JOURNAL OF MANUFACTURING PROCESSES, v.127, pp.107 - 114, 2024-10
Jo H.; Song B.-U.; Huh J.-Y.; Lee S.-K.; Lee I., Journal of Mechanical Design, v.146, no.10, 2024-10
Kim, Ji-Young; Rehman, Abdul; Ryu, Hyemin; Oh, Injong; Sim, Gi-Dong, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.912, 2024-10
Lee, Song Ha; Cha, Beomseok; Yi, Hee -Gyeong; Kim, Jangho; Jeon, Jessie Sungyun; Park, Jinsoo, SENSORS AND ACTUATORS B-CHEMICAL, v.417, 2024-10
On improving time-delay control under certain hard nonlinearities Chang, PH; Park, SH, MECHATRONICS, v.13, pp.393 - 412, 2003-05 |
외부가압 공기윤활 저어널베어링의 안정석에 관한 해석 임종락; 김경웅; 김금모, 한국윤활학회지, v.6, no.1, pp.74 - 81, 1990-04 |
Frictional modes of barrel shaped piston rings under flooded lubrication Cho, SW; Choi, SM; Bae, Choongsik, TRIBOLOGY INTERNATIONAL, v.33, no.8, pp.545 - 551, 2000-08 |
Knock Characteristics in Liquefied Petroleum Gas (LPG)-Dimethyl Ether (DME) and Gasoline-DME Homogeneous Charge Compression Ignition Engines Yeom, Kitae; Bae, Choongsik, ENERGY FUELS, v.23 , no.SI, pp.1956 - 1964, 2009 |
Effects of internal exhaust gas recirculation on controlled auto-ignition in a methane engine combustion Cho, Gyubaek; Moon, Gunfeel; Jeong, Dongsoo; Bae, Choongsik, FUEL, v.88, no.6, pp.1042 - 1048, 2009-06 |
Effects of valve events on the engine efficiency in a homogeneous charge compression ignition engine fueled by dimethyl ether Jang, Jinyoung; Bae, Choongsik, FUEL, v.88, no.7, pp.1228 - 1234, 2009-07 |
Measurements of droplet size distribution and in-cylinder mixture formation from a slit injector in a direct-injection gasoline engine Moon S.; Choi J.; Yeom K.; Bae, Choongsik, JOURNAL OF PHYSICS: CONFERENCE SERIES, v.85, no.1, 2007-10 |
Design of a heat exchanger to reduce the exhaust temperature in a spark-ignition engine Lee, Seokhwan; Bae, Choongsik, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, v.47, no.4, pp.468 - 478, 2008-04 |
Internal and near-nozzle flow of a pressure-swirl atomizer under varied fuel temperature Moon, Seoksu; Bae, Choongsik; Abo-Serie, Essam F.; Choi, Jaejoon, ATOMIZATION AND SPRAYS, v.17, no.6, pp.529 - 550, 2007 |
The structure of a break-up zone in the transient diesel spray of a valve-covered orifice nozzle Bae, Choongsik; Kang, J., INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.7, no.4, pp.319 - 334, 2006 |
Flame Propagation Characteristics in a Heavy-Duty LPG Engine With Liquid Phase Port Injection Oh, Seungmook; Kim, Seungyu; Bae, Choongsik, SAE transactions, Journal of Fuel and Lubricants, Vol. 111, No.3, pp.2284-2296, 2002-05 |
Development of cavitation and enhanced injector models for diesel fuel injection system simulation Lee, HK; Russell, MF; Bae, Choongsik; Shin, HD, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.216, no.D7, pp.607 - 618, 2002 |
Mathematical model of diesel fuel injection equipment incorporating non-linear fuel injection Lee, HK; Russell, MF; Bae, Choongsik, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.216, no.D3, pp.191 - 204, 2002 |
Morphological investigation of the microstructure, dimensions, and fractal geometry of diesel particulates Lee, KO; Cole, R; Sekar, R; Choi, MY; Kang, JS; Bae, Choongsik; Shin, HD, PROCEEDINGS OF THE COMBUSTION INSTITUTE, v.29, pp.647 - 653, 2002 |
An experimental measurement of lubrication behavior of piston rings in a spark ignition engine Cho, S; Choi, Sangmin; Bae, C, JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, v.45, no.2, pp.373 - 378, 2002-05 |
Diesel-fuelled homogeneous charge compression ignition engine with optimized premixing strategies Kook, S; Bae, Choongsik; Kim, J, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.8, no.1, pp.127 - 137, 2007-02 |
The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature COmbustion in an Automotive Diesel Engine Kook, Sanghoon; Bae, Choongsik; Miles, Paul C; Choi, Dae; Bergin, Michael; Reitz, Rolf D., SAE TRANSACTIONS, v.114, no.3, pp.1370 - 1381, 2006-04 |
Measurement devices for piston assembly friction and oil film thickness Cho, SW; Choi, Sangmin; Bae, CS, INTERNATIONAL JOURNAL OF VEHICLE DESIGN, v.29, no.4, pp.390 - 402, 2002 |
Hydrocarbon Emissions from a Gas Fueled SI Engine under Lean Burn Conditions Kim, Changup; Bae, Choong-Sik, SAE (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS, v.108, no.4, pp.1551 - 1558, 1999 |
Performance of Prototype High Pressure Swirl Injector Nozzles for Gasoline Direct Injection Jang, Changsoo; Choi, Sangmin; Bae, Choong-Sik; Kim, Jooyoung; Baik, Seungkook, SAE (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS, v.108, no.4, pp.2165 - 2176, 1999 |
Discover