Browse "ME-Journal Papers(저널논문)" by Issue Date
Showing results 481 to 500 of 12272
| 레이저 절단품질에 미치는 절단압력의 영향(2) : 절단압력과 절단품질간의 상관관계 양영수; 나석주; 김원배; 김태균, 한국정밀공학회지, v.5, no.1, pp.63 - 70, 1988-03 |
| An adaptive model following control of electro-hydraulic velocity control systems subjected to unknown disturbances J.S. Yun; Cho, Hyungsuck, IET CONTROL THEORY AND APPLICATIONS, v.135, no.2, pp.149 - 156, 1988-03 |
| Weighted Minimum Variance Control of Servodamper System with Input Energy Constraint KANG , MIN-SIG; Lee, Chong-Won, JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL, v.110, pp.70 - 77, 1988-03 |
| Adaptive model following control of electrohydraulic velocity control systems subjected to unknown disturbances Yun, J.S.; Cho, Hyungsuck, IEE PROCEEDINGS . D , CONTROL THEORY AND APPLICATIONS, v.135, no.2, pp.149 - 156, 1988-03 |
| 프로파일링을 한 원통형 로울러의 탄성유체윤활(I) 박태조; 김경웅, 대한기계학회논문집 A, v.12, no.2, pp.262 - 270, 1988-03 |
| 저어널베어링의 압력 및 온도분포에 관한 실험적 연구 신영재; 김경웅, 한국윤활학회지, v.4, no.1, pp.57 - 60, 1988-04 |
| MODAL-ANALYSIS OF A DISTRIBUTED PARAMETER ROTATING SHAFT Lee, Chong-Won; KATZ, R; ULSOY, AG; SCOTT, RA, JOURNAL OF SOUND AND VIBRATION, v.122, no.1, pp.119 - 130, 1988-04 |
| THE DYNAMIC-RESPONSE OF A ROTATING SHAFT SUBJECT TO A MOVING LOAD KATZ, R; Lee, Chong-Won; ULSOY, AG; SCOTT, RA, JOURNAL OF SOUND AND VIBRATION, v.122, no.1, pp.131 - 148, 1988-04 |
| A Study of the Influence of Press Speed, Contact Time, and Heat Transfer in Non-Isothermal Forging of Ti and Al Alloy Rings Im, Yong-Taek; Shen, GangShu, TRANSACTIONS- NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, v.16, pp.91 - 98, 1988-05 |
| INVESTIGATION OF METALLIC BINDERS FOR ALUMINA THROUGH BOND STRENGTH TEST Yang, Min-Yang; KEANE, JJ; KRAMER, BM, SCRIPTA METALLURGICA, v.22, no.5, pp.643 - 647, 1988-05 |
| INFLUENCE OF HEATING RATE ON THE LASER SURFACE HARDENING OF A MEDIUM CARBON-STEEL Na, Suck-Joo; YANG, YS, SURFACE COATINGS TECHNOLOGY, v.34, no.3, pp.319 - 330, 1988-05 |
| On the Dynamic Characteristics of a Balanced PUMA-760 Robot Chung, Wan-kyun; Cho, Hyungsuck, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.35, no.2, pp.222 - 230, 1988-05 |
| USE OF A VERTICAL THROUGH-FLOW TO STRATIFY AN INITIALLY ISOTHERMAL CONTAINED FLUID Hyun, Jae Min; HYUN, KCK, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.9, no.2, pp.220 - 224, 1988-06 |
| 플라즈마를 이용한 용접 및 절단 S.-J.Na, 대한용접·접합학회지, v.6, no.2, pp.1 - 8, 1988-06 |
| Measuerment Signal Selection and a Simultaneous State and Input Observer Stein J. L.; Park, Youngjin, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, v.110, no.2, pp.166 - 173, 1988-06 |
| 전산모델에 의한 응축기내에서의 기체유동현상의 예측 설광원; 이상용, 설비공학논문집, v.17, no.3, pp.238 - 248, 1988-06 |
| AL-7029의 Pulse-GMA 용접에 관한 연구(1): 용접변수가 용접부 형상에 미치는 영향 김재웅; 허장욱; 나석주; 이용연, 대한용접·접합학회지, v.6, no.2, pp.47 - 55, 1988-06 |
| A study on the current density distribution and constriction resistance in a single line contact with various space angles by using the conformal mapping S.-W.Park; Na, Suck-Joo, IEEE TRANSACTIONS ON COMPONENTS, HYBRIDS, AND MANUFACTURING TECHNOLOGY, v.11, no.2, pp.227 - 229, 1988-06 |
| FITTING OF CRIMP CONTACTS TO CONNECTORS USING INDUSTRIAL ROBOTS SUPPORTED BY VIBRATING TOOLS WARNECKE, HJ; FRANKENHAUSER, B; Gweon, Dae-Gab; CHO, HS, ROBOTICA, v.6, pp.129 - 2, 1988-06 |
| 평균 유동이 있는 단순확장관의 기하학적 형상이 음향학적 특성에 미치는 영향 - 실험적 고찰 홍경섭; 김양한; 곽윤근; 김광식, 대한기계학회논문집 A, v.12, no.4, pp.662 - 669, 1988-07 |
Discover
Type
- 12,272 Article
Open Access
- 407 OA Article
Date issued
- 1,687 2020 - 2024
- 3,974 2010 - 2019
- 3,679 2000 - 2009
- 2,269 1990 - 1999
- 600 1980 - 1989