Showing results 33 to 92 of 123
Comparative study of RBDO algorithms based on FORM and FAMM Kwak, Byung Man, ECCM-2006: European Conf. on Computational Mechanics, 2006 |
Comparative study of reliability analysis by regression modeling technique Kwak, Byung Man, WCSMO-7(7th World Congress on Structural and Multidisciplinary Optimization), pp.1206 - 1213, 2007 |
Compensation for decay of signal strength in damage detection by ultrasonic imaging: Application to migration technique An J.; Haftka R.T.; Kim N.-H.; Yuan F.-G.; Kwak, Byung Man, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2009-05-04 |
Complementarity Problem Formulation and Nature of 3-D Frictional Contact Kwak, Byung Man, ICES '92, pp.0 - 0, 1992-12-01 |
Concept of Allowable Load Set and Corresponding Measure of Reliability for Use in Structural Integrity Evaluation and Design Kwak, Byung Man, pp.128 - 0, 2001-08-01 |
Concept of allowable load set and its application to multi-body mechanical systems Kwak, Byung Man, pp.0 - 0, 2001-11-01 |
Contact Stress and Failure Analysis on Bolted Joints in Composite Plates by Considering Material Nonlinearity Kwak, Byung Man, pp.0 - 0, 1996-07-01 |
Continuum topology optimization Lee S.B.; Kim I.Y.; Kwak, Byung Man, Collection of Technical Papers - 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, v.4, pp.2471 - 2483, 2004-08-30 |
Delay Line Circuit Design For Crosstalk Minimization Using Genetic Algorithm Chung, Chaeho; Lee, Soobum; Kwak, Byung Man; Kim, Gawon; Kim, Joungho, China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, pp.551 - 556, CJK-OSM, 2006-11-06 |
Design and Fabrication of Cantilever Microaccelerometer Arrays witha Symmetrically Bonded Proof-mass Kwak, Byung Man, Symposium on Micromechanical Systems, IMECE'98, pp.353 - 356, 1998-11-01 |
Design of experiment based reliability analysis and optimization augmented by response surface method for efficiency Kwak, Byung Man, CJK-OSM, pp.113 - 118, 2004 |
Design of flexural stage considering multiple constraints using smooth boundary topology optimization Kwak, Byung Man, WCSMO-7(7th World Congress on Structural and Multidisciplinary Optimization), pp.1724 - 1731, 2007 |
Design of flexural stage using smooth boundary topology optimization Kwak, Byung Man, China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, pp.41 - 46, 2006 |
Design optimization under uncertainty with or without probability information, Keynote speech Kwak, Byung Man, AIAA/ISSMO MA&O Conference, 2008 |
Design space optimization for adaptive layout refinement Kwak, Byung Man, pp.0 - 0, 2001-04-01 |
DESIGN SPACE OPTIMIZATION FOR TOPOLOGY BASED ON FIXED GRID Jang, In Gwun; Kwak, Byung Man, 3rd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, pp.0 - 0, China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, 2004-10-01 |
Design space topology optimization Kwak, Byung Man, CJK-OSM2 (China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems), pp.275 - 280, 2002 |
Determination of Muscle and Joint Forces across Human Elbow Kwak, Byung Man, Advances in Bioengineering, Bioengineering Division, ASME, pp.70 - 71, 1983-08-01 |
DEVELOPMENT OF A MULTIDISCIPLINARY OPTIMIZATION SOFTWARE FOR MEMS STRUCTURES, DS/MEMS Kwak, Byung Man, USNCCM7, pp.0 - 0, 2003-07-01 |
Development of optimal design markup language and its application to a CAD-based total optimal design system Kwak, Byung Man, WCSMO5, pp.0 - 0, 2003-05-01 |
Developments in robust and reliability based design optimization of structural and mechanical systems, Plenary Lecture Kwak, Byung Man, APCOM'07-EPMESC XI, 2007 |
Dynamic frictional contact analysis by a Newton-type method and an application to low velocity impact Kwak, Byung Man, pp.0 - 0, 1998-06-01 |
Efforts in developing design and simulation tools for MEMS: DS/MEMS and CA/MEMS Youn, Sung-Kie; Kwak, Byung Man; Kwon, Jang-Hyuk; Chang, Su-Young; Huh, Jae S.; Kim, Eugene, Symposium on Design/Test/Integration and Packaging of MEMS/MOEMS, 2002, v.4755, pp.275 - 284, 2002-01 |
Elaborate Simulation of Ball Indention Process by Elasto-plastic Large Deformation Contact Analysis Kwak, Byung Man; Lee, Byung Chai; Joo, J. W., Proceeding VI International Congress on Experimental Mechanics, 1988, pp.0 - 0, 1988-07 |
Error estimation and adaptive refinement for extended FEM Kwak, Byung Man, JSME Computational Mechanics Conference, pp.383 - 384, 2005 |
Evolutionary topology optimization for large scale problems using domain expansion and refinement Kwak, Byung Man, World Congress on Structural and Multidisciplinary Optimization, pp.141 -, 2005 |
Evolutionary topology optimization using design space optimization and its application Jang, In Gwun; Kwak, Byung Man, ICCES 2005: Intern. Conf. on Computational & Experimental Eng. and Sci, pp.0 - 0, ICCES, 2005-12 |
Forces at the Femoral Head during Various Activities Yoon, Yong-San; Kwak, Byung Man, Proc. of the First Pacific Area Conference on Orthopaedics and Biomechanics, pp.64 - 69, 1984-06 |
Formalation of Dynamic Contact by Linear Complementanity Kwak, Byung Man, pp.171 - 176, 1996-09-01 |
High density silicon microprobe arrays for LCD pixel inspection Kwak, Byung Man, IEEE, The Ninth Annual International Workshop on Micro Electro Mechanical Systems, 1996, pp.429 - 434, 1996-02-01 |
Hydrodynamic force on a plate near the plane wall Kim M.-U.; Kim K.-W.; Kim J.H.; Kwak, Byung Man, 2000 International Conference on Modeling and Simulation of Microsystems - MSM 2000, pp.583 - 585, MSM, 2000-03-27 |
Imposing essential and natural boundary comdtions on geometric boundaries for X-FEM Kwak, Byung Man, China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, pp.373 - 378, 2006 |
Integratioin of Commercial Codes from CAD to Optimization for Structural Design Kwak, Byung Man, pp.649 - 655, 1999-11-01 |
Large Deformation Elastoplastic Contact Analysis Kwak, Byung Man, First World Congress on Computational Mechanics, TICOM, 1986 |
Linear Complementarity Formulation of three Dimensional Frictional Contact Kwak, Byung Man, Computational Mechanics '91, Proc. ICES, pp.572 - 577, 1991-08-01 |
Mechanical Analysis of Conical Fit Connections in Modular Prosthesis Design Kwak, Byung Man, Proc. of the First Pacific Area Conference on Orthopaedics and Biomechanics, pp.70 - 94, 1984 |
Motion and Structural Analysis of a Ship Block under Lifting and Turnover Operation Kwak, Byung Man, International Conference on Mechanical Engineering, pp.0 - 0, 2000-11-01 |
Multi-level design of experiments for statistical moment and probability analysis and efficiency enhancement by function approximations, Keynote lecture Kwak, Byung Man, World Congress on Computational Mechanics, 2006 |
Multi-scale FEM coupled with X-FEM for optimization in Microstructure Kwak, Byung Man, China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, pp.629 - 634, 2006 |
Multi-scale FEM coupled with X-FEM for optimization in microstructure Kwak, Byung Man, WCSMO-7(7th World Congress on Structural and Multidisciplinary Optimization), pp.1017 - 1023, 2007 |
New Formulations of Design Optimization for Six-sigma, Reliability and Robustness Kwak, Byung Man, ICAD2004, pp.0 - 0, 2004-06-01 |
Nodal line optimization and application to violin top plate Kwak, Byung Man, Intern Conference on Computational & Experimental Engineering and Sciences, pp.B06 -, 2008 |
Nonlinear complementarity formulation for analysis of frictional dynamic contact problems Kwak, Byung Man, pp.286 - 0, 1999-08-01 |
Nonlinear complementarity problem formulation of three dimensional frictional contact and its numerical implementations Kwak, Byung Man, Proceedings of the 1997 3rd International Conference on Contact Mechanics, pp.159 - 169, International Conference on Contact Mechanics, 1997-07-01 |
Numerical Implementation of Shape Design Sensitivity Analysis by Boundary Integral Equation for Fillet Design Problem Kwak, Byung Man, Proc. of ICES 88-Atlanta, pp.0 - 0, 1988-04-01 |
Optimal Design of Lightly Damped Structures Under Random Excitation Kwak, Byung Man, Proceedings of the 18th Midwestern Mechanics Conference, pp.463 - 466, 1983-05-01 |
Optimal design of tire contours using CAD programming interface Kwak, Byung Man, CJK-OSM, pp.269 - 274, 2004 |
Optimal layout of an offshore crane using topology optimization Jang, In Gwun; Kwak, Byung Man, ASME 2012 International Mechanical Engineering Congress & Exposition, ASME, 2012-11-09 |
OPTIMAL STOCHASTIC DESIGN OF FOUR-BAR MECHANISMS FOR TOLERANCE AND CLEARANCE. Rhyu Je Ha; Kwak, Byung Man, Design Engineering Technical Conference. |
Optimal Tolerance Design for General Distributions Using Three-point Information Kwak, Byung Man, pp.0 - 0, 2002-07-01 |
Pattern design of non-pneumatic tire for stiffness using topology optimization Kwak, Byung Man; Yoo E.J.; Sung Y.H.; Jang I.G., 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009, v.6, pp.831 - 836, 2009-08-30 |
Reliability based design optimization using the response surface augmented moment method Kwak, Byung Man, World Congress on Structural and Multidisciplinary Optimization, pp.102 -, 2005 |
Reliability based robust design of a vibratory micro gyroscope Kwak, Byung Man, pp.162 - 163, 2001-06-01 |
Reliability-based Shape Optimization using AFOSM Method Kwak, Byung Man, pp.553 - 558, 1996-09-01 |
Replacement Arthroplastry Using the Charnley Prosthesis in Old Tuberculosis of the Hip Chinical Experience with 8-10 Year Follow-up Kwak, Byung Man, The Young Patient with Degenerative Hip Disease, J. Sevastik and I. Galdie(ed). Almgrist & Wiksell International, pp.217 - 226, 1985-08-01 |
Replacement Arthroplasty using the Charnley Prosthesis in Old Tuberculosis of the Hip Kwak, Byung Man, 16th Congress, SICOT '84, pp.0 - 0, 1984-08-01 |
Report of Revision Surgery in Miscellaneous Types of Hip Arthroplasties Kwak, Byung Man, 16th Congress, SICOT '84, pp.0 - 0, 1984-08-01 |
Response surface augmented moment method (RSMM) for fast reliability analysis and optimization Kwak, Byung Man, ICOSSAR 2005 (International Conference on Structural Safety and Reliability), pp.352 -, 2005 |
Review on 3-D Frictional contact and New Natural Formulation by Complementarity Kwak, Byung Man, pp.0 - 0, 1992-05-01 |
Robust and versatile software system for optimal design of MEMS structures Kwak, Byung Man; Lee Sang Hoon; Huh Jae Sung, Design, Test, Integration, and Packaging of MEMS/MOEMS, v.4019, pp.200 - 209, 2000-05-09 |
Discover