DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Kim, In-Sup | - |
dc.contributor.advisor | 김인섭 | - |
dc.contributor.author | Hong, Jin-Ki | - |
dc.contributor.author | 홍진기 | - |
dc.date.accessioned | 2011-12-14T08:16:04Z | - |
dc.date.available | 2011-12-14T08:16:04Z | - |
dc.date.issued | 2000 | - |
dc.identifier.uri | http://library.kaist.ac.kr/search/detail/view.do?bibCtrlNo=158121&flag=dissertation | - |
dc.identifier.uri | http://hdl.handle.net/10203/49424 | - |
dc.description | 학위논문(석사) - 한국과학기술원 : 원자력공학과, 2000.2, [ vi, 56 p. ] | - |
dc.description.abstract | Inconel 690 is an austenitic nickel - based alloy, which has been used as a substitute material for Inconel 600 in steam generator (S/G) tubing in pressurized water reactor (PWR). In this study, the effects of heat treatment on fretting wear were investigated. From the microstructure observation, the solution annealing temperature and time had an influence on the grain size. The carbide morphology of Inconel 690 was mainly affected by the thermal treatment time and temperature. From the wear test results, it was shown that the larger grain size specimen wore less and cracks were found in carbides existing grain boundary except initial period of wear test of few carbide existing specimen. Cracks were not found in carbide free specimens. The hardness of specimen was not a major variable in fretting wear. Thus, it seemed that the carbides in grain boundary assisted crack formation and propagation in carbide existing specimens. It could be inferred that the critical mechanism of carbide existing specimen was delamination and that of carbide free specimen was abrasion. The larger grain size and carbides in grain boundary improved the wear property of Inconel 690 tube. | eng |
dc.language | eng | - |
dc.publisher | 한국과학기술원 | - |
dc.subject | Fretting wear | - |
dc.subject | 열처리 | - |
dc.subject | 마모 | - |
dc.subject | 인코넬 690 | - |
dc.subject | 증기발생기 | - |
dc.subject | Heat treatment | - |
dc.subject | Inconel 690 | - |
dc.subject | Steam generator | - |
dc.title | Effects of heat treatment on the fretting wear of inconel 690 steam generator tube | - |
dc.title.alternative | 열처리가 Inconel 690 증기 발생기 전열관의 마모에 미치는 영향 | - |
dc.type | Thesis(Master) | - |
dc.identifier.CNRN | 158121/325007 | - |
dc.description.department | 한국과학기술원 : 원자력공학과, | - |
dc.identifier.uid | 000983646 | - |
dc.contributor.localauthor | Hong, Jin-Ki | - |
dc.contributor.localauthor | 홍진기 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.