Wireless power transfer for high-precision position detection of railroad vehicles

Abstract

Detection of vehicle position is critical for successful operation of intelligent transportation system. In case of railroad transportation systems, position information of railroad vehicles can be detected by GPS, track circuits, and so on. In this paper, position detection based on tags onto sleepers of the track is investigated. Position information stored in the tags is read by a reader placed at the bottom of running railroad vehicle. Due to limited capacity of battery or its alternative in the tags, power required for transmission of position information to the reader is harvested by the tags from the power wirelessly transferred from the reader. Basic mechanism in wireless power transfer is magnetic induction and power transfer efficiency according to the relative location of the reader to a tag is discussed with simulation results. Since power transfer efficiency is significantly affected by the ferromagnetic material (steel) at the bottom of the railroad vehicle and the track, magnetic beam shaping by ferrite material is carried out. With the ferrite material for magnetic beam shaping, degradation of power transfer efficiency due to the steel is substantially reduced. Based on the experimental results, successful wireless power transfer to the tag coil is possible when transmitted power from the reader coil is close to a few watts.