DC Field | Value | Language |
---|---|---|
dc.contributor.author | Zhang, Shuang | ko |
dc.contributor.author | Yoon, Jeong Whan | ko |
dc.contributor.author | Lee, Sunguk | ko |
dc.contributor.author | Lou, Yanshan | ko |
dc.date.accessioned | 2023-08-24T12:00:16Z | - |
dc.date.available | 2023-08-24T12:00:16Z | - |
dc.date.created | 2023-07-06 | - |
dc.date.issued | 2017-04 | - |
dc.identifier.citation | 20th International ESAFORM Conference on Material Forming, ESAFORM 2017 | - |
dc.identifier.issn | 0094-243X | - |
dc.identifier.uri | http://hdl.handle.net/10203/311807 | - |
dc.description.abstract | It is important to fabricate fracture specimens with minimum variation of triaxiality in order to characterize the failure behaviors experimentally. Fracture in ductile materials is usually calibrated by uniaxial tensile, shear and plane strain tests. However, it is often observed that triaxiality for shear specimen changes severely during shear fracture test. The nonlinearity of triaxiality is most critical for shear test. In this study, a simple in-plane shear specimen is optimized by minimizing the variation of stress triaxiality in the shear zone. In the optimization, the Hill48 and Yld2000-2d criteria are employed to model the anisotropic plastic deformation of an aluminum alloy of 6k21. The evolution of the stress triaxiality of the optimized shear specimen is compared with that of the initial design of the shear specimen. The comparison reveals that the stress triaxiality changes much less for the optimized shear specimen than the evolution of the stress triaxiality with the original design of the shear specimen. | - |
dc.language | English | - |
dc.publisher | American Institute of Physics Inc. | - |
dc.title | Shape optimization of shear fracture specimen considering plastic anisotropy | - |
dc.type | Conference | - |
dc.identifier.wosid | 000419825000123 | - |
dc.identifier.scopusid | 2-s2.0-85037708084 | - |
dc.type.rims | CONF | - |
dc.citation.publicationname | 20th International ESAFORM Conference on Material Forming, ESAFORM 2017 | - |
dc.identifier.conferencecountry | IE | - |
dc.identifier.conferencelocation | Dublin | - |
dc.identifier.doi | 10.1063/1.5008080 | - |
dc.contributor.localauthor | Yoon, Jeong Whan | - |
dc.contributor.nonIdAuthor | Zhang, Shuang | - |
dc.contributor.nonIdAuthor | Lee, Sunguk | - |
dc.contributor.nonIdAuthor | Lou, Yanshan | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.